Best Motor Controller Shield

ESC With Brake,320A Brushed ESC Electronic Speed Controller With Brake for RC Car Boat

  • 【Used for】This 320A brushed motor ESC can be used for RC car/boat.This Brushed Motor Speed Controller with 3S (12V), suitable for no more than 380 motor. Using 2S (8.4V), suitable for no more than 540 motor..
  • 【Quick Response】320A Brushed ESC Speed Controller with High-frequency drive system, quick response.Built to meet standard specification, strictly follow factory quality control..
  • 【Feature】320A ESC can provide 320A forward or 160A back ward instantaneous motor current when connected to motor..
  • 【Excellent Performance】320A Brushed ESC Conform to strict quality control standards, dependable to use.Electronic Speed Controller Manufactured according to the original specifications..
  • 【Standard Specification】ESC Brushed Electric Speed Controller,Automatically fine the center position of the accelerator.Made in strict accordance with standard requirements..
Check Stock

Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
  • SJS technology is a mechanical clutch system that minimizes motor and gear damage.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
  • Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock

JJ Boom 48v/60V 800w 10\ Mini Harley Motor Wheel Vacuum Tyres 10-6-5.5 Wide Tyre Scooter Motor EVO Engine Motor ATV Hub Motor(48v800w)

  • ...otor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【24Mosfet 45A Brushless Motor Controller】- The Motor Kit include 24MOS 45A±1A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【E-scooter Motor Kit List and Useful】- 2000W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth, T8F Chain, 3 speed Switch, is Good for Electric Scooter, E-bike, Mini Motorcycle, Dirt bike, Electric Go karts, Bicycle, Quad carOther DIY project and more..
Check Stock

Electric Motor 1600W 48V go kart Electric Motor kit With throttle 33A Speed Controller BLDC ATV Kits Scooter Motorcycle Engine Ebike Conversion Kit Chain T8F

  • ...otor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【15Mosfet 33A Brushless Motor Controller】- The Motor Kit include 15MOS 33A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【SMALL BODY WITH HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor with T8F 9/11Teeth Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 4.25kg (9.37lb)..
  • 【E-scooter Motor Kit List and Useful】- 1600W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth Plate Ring, T8F Chain, 3 speed Switch, is Good for Electric Scooter, E-bike, Mini Motorcycle,Dirt bike, Electric Go karts, Bicycle, Quad car，Other DIY project and more..
Check Stock

LEDMOMO 1203BB 6V 12V 3A 80W DC Motor Speed Controller (PWM) Adjustable Motor Driver Switch

  • 1203BB DC Motor Speed Controller regulate the speed of the motor by adjusting Pulse-Width Modulation (PWM)..
  • Working Voltage: DC 6-24V. Maximum continuous output current : 3A. Maximum output power: 80W..
  • The Motor Speed Controller built-in switch. You can control the forward direction and the stop of DC motor by the switch..
  • The circuit built-in a 3A fuse. Make the use of this motor safer..
  • Note! DC motor speed controller is connected to DC power supply. Never connect directly to household 220V AC power supply..
Check Stock

Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers (1PCS)

  • The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  • It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect..
  • The motor speed controller can easily provide a continuous current to your DC motor or other DC load..
  • Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller..
  • Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram".
  • Turn on the power, and adjust the potentiometer..
Check Stock

EBIKELING Waterproof Ebike Conversion Kit for Electric Bike 26" Front or Rear Wheel Electric Bicycle Hub Motor Kit, 500W, Rear/LCD/Thumb

  • ... BLDC Scooter Motor: Brushless High Speed Mid Drive Motor, Voltage 72V DC, Rated Power 3000W peak, Current 45A, Rated Speed 4900rpm/min, (Max 5800RPM), T8F 11Teeth Sprocket, Load Weight: About 100-200kg. NOTE: motor speed according to your load-weight and others..
  • BLDC Controller: Voltage 48-72V, Proctect 42 volt, Power 3000 watt, 24 mosfet, Current 50 amp, Phase Degree: 120°, Smart Controller Can Work With Hall Sensor And Without hall, Brushless Motor Speed Controller, E-Brake, 3-Speed (Low Mid High Speed), Reverse Functions, Indicator Light And Power Lock Functions..
  • Handlebar Twist Throttle: Universal Accelerator Handlebar Throttle Twist Grips, 12V-72V Universal, With 3 Speed (High,Mid and Low Speed) And Reverse Functions, Wire Length About 150cm ( 59 inch) , High Quality Rubber And ABS Material..
  • Useful: Suit For Electric Scooter, Mini Electric Motorcycle DIY Engine Kit, Razor Push Scooter, Ebike Bicycle, Go Karts, E-bike, E-Tricycle,Mid Drive Motor Kit, Complete Set, DIY Engine System, Cycling Part and more. Packing List: 1pc Motor, 1pc Controller, 1pair Handlebar, 1pc Foot Pedal Throttle 1pc lock key, 1set T8F ch....
Check Stock

AYNEFY Motor Speed Controller, 400W AC Small Size High Precision Motor Speed Governor Motor Pinpoint Regulator Forward & Backward Direction

  • 【Specific use】: This motor speed controller is specially designed for AC220V 50/60HZ motor..
  • 【Easy to install】: The dc motor speed governor controller is easy to install and replace, no extra parts are needed, you can easily install this control tool, save your time and energy..
  • 【Standard speed range】: Speed governor's speed regulation range is from 90-1400r/min 50HZ to 90-1700r/min 60HZ..
  • 【Wide use range】: This motor adjustment control is suitable for wide using range like packaging, printing, food, electronics, instrumentation, medical equipment, clothing industry production line for speed control drive devices..
  • 【Long-term use】: This motor controller is made of high quality electronic circuit and integrated components in order to ensure its long-term durability.
  • 【High utility】: The multi-functional speed controller has small size, high precision and wide speed controlling range, so it has high utility and long-term service life.
Check Stock

Tilta Nucleus-Nano Wireless Lens/Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirrorless, or Cine-Style Lenses on Cage, Gimbal Such As Ronin S

  • The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm..
  • The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately)..
  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions..
  • The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same cha....
Check Stock