Best Mixed Metal Oxides Anode

SAKRETE | Concrete & Mortar Dissolver | 28 oz

  • Available in 72 different powdered colors, that can be mixed together for custom colors..
  • Very Durable under exposure to UV-Sunlight, Resists fading.
  • Pure mineral oxides with no additives and no fillers!.
  • Uniform dispersion, easy to use, highly concentrated color, use 4-lbs of color per 94-lbs of cement.
  • Made in the USA with highest quality UV-stable pigments, meets ASTM C-979 rating.
Check Stock

Solar Ionizer Replacement Anode/Mineral Electrode Compatible with Floatron - 1 Anode |1 Basket | 1 Wing-Screw

  • NOTE TO BUYERS: Competitor(s) posing as "Amazon Customer(s)" are posting false details on Amazon product reviews. 1.) Anode dimensions are optimized for maximum ions in water to reduce chlorine use 2) Each anode may last 12 to 15 months. 3.) Guaranteed to fit Floatron brand (see image 2). Bigger anode causes unit to be inoperative majority of time due to insufficient clearance between coil and anode. Hilltop Solar anodes save money on chlorine and pool operating costs. ..
  • HIGH PERFORMANCE ANODE (Exclusive to Hilltop Solar): Extremely pure copper (greater than 99.95%) with silver with no impurities. Hilltop Solar anodes contain billions of copper-silver ions per anode and designed to maximize ionization capacity to add maximum possible ions into water to save on chlorine. Anode, basket and wing-screw guaranteed to fit floatron branded solar ionizer unit..
  • DO NOT CLEAN ANODE: Solar Ionizer unit cleans the anode automatically during the ionization process. Wattage from solar ionizer is applied at center of anode and this cannot be cleaned. Therefore cleaning the outside an anode with any abrasive materials, the following results with NO BENEFITS will occur: 1. Frequent anode replacements 2. Significantly increase costs due to wasted mineral ions 3. D....
Check Stock

Replacement Anode High Performance (Read Description Before Buy) | Anode Dimensions - See Image 2 | Guaranteed to fit Remington Solar (See 3rd Image) | Copper-Silver(99.95% Pure) | Saves Chlorine

  • NOTE TO BUYERS - See Image 5: Competitors and Amazon Customers who do not read are posting false and misleading details on Amazon product reviews, that is not validated by Amazon . See image 5 for more details..
  • GUARANTEED TO FIT REMINGTON SOLAR IONIZER - See image 3: Anodes have been tested and guaranteed to fit the ionizer unit. One end of anode fits the ionizer unit and other end fits the Wingscrew supplied with anode..
  • PREMATURE ANODE REPLACeMENTS: 95% of customers replace the anode with more than 80% mineral remaining on old anode. Anodes are sacrificial, and designed to degrade. If anode is looking new or barely degraded, Solar ionizer unit is inoperative. Solar ionizer unit will always ionize regardless anode condition, as long it is installed on unit. Common misconception to replace anode to get solar ionizer to function is an INCORRECT PROCEDURE..
  • DO NOT CLEAN ANODE: Any Solar Ionizer automatically cleans the anode during ionization process. Power from solar panel is applied at center of an anode that cannot be cleaned. Cleaning outside an anode with abrasive material(s), will result in NO BENEFITS other than:....
Check Stock

Oddtone Graphics Card GPU Support Bracket, Adjustable Height GPU Sag Bracket with Magnet & Non-Slip Sheet, GPU Brace for Prevent Universal Graphics Card Sag, L

  • All-aluminum metal material – Provides strong and long-lasting support. This is made of all-aluminum metal instead of plastic, can avoid the aging of plastic materials and can be used as a long-term replacement..
  • Screw adjustment design – The graphics card bracket design can be compatible with various chassis configurations of traditional and long power supply bays to meet various user hosts..
  • Bottom hidden magnet design – The magnet hidden in the base is designed for easy installation and more stable standing in the chassis..
  • The workmanship of the detail process – The small graphics card support frame is made of three complex processes: polished anode, sandblasted anode and CNC high-speed edge-washing high-gloss process. The full anode process can maintain the durability..
  • Tool-free fixing module – The support module is equipped with a cushioning anti-scratch pad and a base high-gloss process..
Check Stock

Rheem SP213670 SP213670-Water Heater Element

  • ★ Compatible with Rheem Reliance Richmond GE and many more that also use the standard ¾" NPT Anode Rod Connection..
  • ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod....
  • ★ FLEXIBLE DESIGN - Allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw..
  • ★ ADVANTAGES OF MAGNESIUM ANODE RODS - Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the....
  • ★ The part/product is not sponsored or endorsed by, or affilliated with the brands it fit, including Rheem, Reliance, Richmond, GE..
Check Stock

About Fluid | MAGNESIUM Flexible Anode Rod, INCLUDES 1-1/16" Hex Socket, Complete Kit for Water Heaters | Teflon Tape | Hi Temp Brass Cap | Easy-To-Follow, Step-By-Step Instructions | 44 Inches Long.

  • ABOUT FLUID’S MAGNESIUM ANODE ROD KIT is the fastest and best choice to prevent your water heater from dissolving itself from the inside out! With the average cost to have a water heater replaced crossing over the $1,400.00 mark, replacing your anode rod is cheap peace-of-mind. This kit makes it simple with everything you need and easy-to-follow, step-by-step instructions, all in one box. Have stinky rotten egg smelling hot water? Search For our About Fluid ALUMINUM / ZINC Anode Rod Kit..
  • KIT INCLUDES! (1) HEX-TYPE ANODE ROD, most water heaters use this kit’s ¾ NPT Anode Rod (2) BRASS CAP, just in case you don’t trust your drain valve to shut completely (3) HARD-TO-FIND 1-1/16”, 6-POINT DEEP-WELL CHROME VANADIUM SOCKET, fits both your old and your new anode (4) PIPE SEALING TEFLON TAPE, with plenty left over for the next time you check your anode’s condition (5) INSTRUCTIONS. All you provide is a ½ Inch Ratchet or Breaker Bar, a friend and your favorite beverage! (not included)..
  • WATER HEATERS BURST AND YOU CAN PREVENT THIS! I began my plumbing apprenticeship in the 90s. The plumbers I worked for would say “they must place a self-destructing device in water heaters, timed to go off just after the warranty is over,” then shake....
Check Stock

Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44'' Long & 0.8'' Diameter

  • ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding..
  • ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years..
  • ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw..
  • ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection..
  • ★ FITS: Almost all water heaters including.
  • Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection..
Check Stock

About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!

  • FITS: Almost all water heaters including.
  • Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition..
  • GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas..
  • LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in ....
Check Stock

Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape

  • MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts..
  • EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater..
  • ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding..
  • FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters..
  • KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape.
Check Stock