Best Mining Pool For Dogecoin

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

  • ?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • ?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • ?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • ?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

HUAXUCHENG BTC-X79-5 Card GPU Full Mining Machine Used to Build The Mining System of Bitcoin Mining Machine and GPU Mining Machine Including Motherboard CPU SSD RAM.PSU Mining Machine

  • Please note: BTC-X79-5 card miner includes: Intel CPU, 128GB SSD, 4G memory, 1800W power supply (super static power supply), fan (silent fan), frame,....
  • The 3060 graphics card has a single card computing power of up to 48MH/s or more, which perfectly supports graphics card mining ETH, which greatly....
  • The motherboard of the BTC-X79-5 card mining machine adopts the H61 chip and a single channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU port....
  • If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • Designed specifically for cryptocurrency mining-Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin, etc. When the BTC-X79-5 card mining machine is....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

  • ...cie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • ❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin and more. The noise of the BTC-X79-5 card mining machine is about 55db when running. It runs very quietly and is perfect for home use..
  • ❤ If you want to use other CPU, please use the CPU below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • ❤Please note: Please connect the power supply to the 6pin of motherboard 1.3.6 for power supply to the motherboard. Please connect the fifth GPU to the monitor. Please contact us when the black screen appears..
Check Stock

Antminer L3++ Litecoin Miner 580MH/S ASIC Miner Scrypt Litecoin Mining Machine Professional LTC Dogecoin Miner Machine

  • Mineable Coins: Our L3++ 580MH/S Litecoin miner is able to mine any coin based on the Scrypt algorithm. There are many coins, but the most famous is Litecoin..
  • High Quality: Our LTC Mining Machine has an aluminum alloy casing, which is sturdy and durable, with front and rear dual cooling fans, independent heat sinks, and good heat dissipation..
  • Stability: The interface of our L3++ Litecoin Dogecoin Miner adopts a snap-on design with close contact, which is conducive to the stability and durability of data transmission..
  • Easy to Use: Our L3++ Scrypt Litecoin Miner do not require a separate host to operate, and are simple to set up and easy to operate..
  • Note: Like New. We will debug the LTC Dogecoin Miner Machine before shipping to make sure it works properly. If you have any questions or need to buy in bulk, please contact us..
Check Stock

Vintage Dogecoin Miner DogeCoin T-Shirt

  • Do you invest in Dogecoin? Buy this vintage Dogecoin Miner logo tee to show your love to cryptocurrencies and Dogecoin..
  • This gift is perfect for your husband, fathers, brothers, family, friends who love Dogecoin on special occasions such as birthday, father's day, Christmas, New Year, Fourth of July. It is also great for people who are Dogecoin Investors, Dogecoin Miners..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...ocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating. Including: motherboard, CPU, power cord, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't come with GPU..
Check Stock

Antminer L3+ 504MH/S Scrypt Litecoin Miner LTC Dogecoin Mining Machine Ready to Ship Now

  • Compatible Coins - Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin and Dogecoin..
  • Built-in controller: No separate host computer required for operation..
  • Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter..
  • We will debug the machine before shipment to ensure normal operation. Hash rate fluctuate within 7% is Normal and acceptable..
  • Pay attention to dust and catkins, so as not to corrode the computing board or cause the heat of the mining machine to not be dissipated..
Check Stock