Best Miniature Bevel Gear

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
Made of 45# steel with high wear-resistance, strong and durable..
Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Scope of application: for all kinds of mechanical transmission occasions..

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

[Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
[Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
[Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..

64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
Pieces 75, ideal for DIY science and small production, product design and mechanical model.
19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.

75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.

36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.