Best Milwaukee M1impact Driver Bare Tool

Milwaukee 2896-26 M18 Fuel 18-Volt Lithium-Ion Brushless Cordless Combo Kit (6-Tool) with (2) 5.0 Ah Batteries, (1) Charger, (2) Tool Bags

  • MILWAUKEE 2704-20 M18 FUEL 1/2" Hammer Drill Driver: POWERSTATE brushless motor delivers 1,200 in. lbs..
  • MILWAUKEE 2753-20 M18 FUEL 1/4 in. Hex Impact Driver: POWERSTATE brushless motor delivers 1800 in. lbs..
  • MILWAUKEE 2720-20 M18 FUEL SAWZALL Reciprocating Saw: POWERSTATE brushless motor makes it the fastest cutting..
  • MILWAUKEE 2730-20 M18 FUEL Cordless Lithium-Ion 6-1/2 in. Circular Saw: POWERSTATE brushless motor provides increased cutting speed and power..
  • MILWAUKEE 2780-20 M18 FUEL Cordless Lithium-Ion 4-1/2 in. / 5 in. Angle Grinder: Paddle switch no-lock delivers maximum sustained power..
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (5-Tool) with Free M18 FUEL Mid Torque 1/2 in. Impact Wrench

  • MILWAUKEE 2704-20 M18 FUEL 1/2" Hammer Drill Driver: POWERSTATE brushless motor delivers 1,200 in. lbs..
  • MILWAUKEE 2753-20 M18 FUEL 1/4 in. Hex Impact Driver: POWERSTATE brushless motor delivers 1800 in. lbs..
  • MILWAUKEE 2720-20 M18 FUEL SAWZALL Reciprocating Saw: POWERSTATE brushless motor makes it the fastest cutting..
  • MILWAUKEE 2730-20 M18 FUEL Cordless Lithium-Ion 6-1/2 in. Circular Saw: POWERSTATE brushless motor provides increased cutting speed and power..
  • MILWAUKEE 2780-20 M18 FUEL Cordless Lithium-Ion 4-1/2 in. / 5 in. Angle Grinder: Paddle switch no-lock delivers maximum sustained power..
Check Stock

Makita XFD13 18V 1/2 Brushless Drill Driver Bare Tool

  • Includes a Bare Tool Makita XFD13 Brushless 18V 1/2-in Drill/Driver.
  • Offers a 2-Speed Transmission to Deliver 0-500 or 0-1,900 rpm No Load Speeds.
  • Compatible with Several Makita LXT 18V Battery Models (Sold Separately).
  • Bare Tool Does NOT Come with Battery, Charger, or Case.
Check Stock

ACDelco ARD12119T G12 Series 12V Cordless Li-ion 3/8” 265 In-lbs Compact Drill Driver - Bare Tool Only

  • COMPACT DESIGN – Our lightweight, powerful 265 In-lbs. torque Li-ion drill driver is engineered with high-quality materials for fast and easy screw....
  • USER-FRIENDLY – Ergonomic soft grip design provides comfort for long working hours and a secure grip for maximum control and steadiness. Slim body....
  • VARIABLE SPEED CONTROL – Unlike other brands that offer only 1 torque setting, our drill driver comes with 18 settings, plus drill mode and variable....
  • BARE TOOL ONLY – (Important): This is only a bare tool: a power tool that comes without a battery, a charger, or a blow mold case. Battery and....
  • 100% SATISFACTION GUARANTEED – For over 35 years we have been manufacturing and providing the best products and services to our customers at the....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Milwaukee 2999-22 M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Surge Impact and Hammer Drill Combo Kit

  • REDLINK PLUS INTELLIGENCE: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
  • BUILD QUALITY: The Hammer Drill/Driver features all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
  • ADVANCED TECHNOLOGY: The M18 FUEL two-tool combo kit delivers the most advanced 18-Volt cordless cutting, drilling and fastening power tool technology.
  • POWERSTATE BRUSHLESS Motor: Purposely built for the M18 FUEL 1/2-Inch Hammer Drill to provides upto 60% More Power.
  • MILWAUKEE AUTHORIZED DEALER: Includes USA Manufacturer Guarantee.
Check Stock

ACDelco ARL1238T G12 Series 12V Li-ion Adjustable Handheld LED Flashlight - Bare Tool Only

  • HIGH PERFORMANCE – Built-in ultra-focus light beam of 8,500 Lux that can cover up to 2 feet in distance by ultra-efficient LED with only 1-watt power consumption..
  • VERSATILE – Features a lightweight (less than 6 oz., excl. battery), an ergonomic soft grip, along with an adjustable 4-position design that cover a broader range of areas without having to move the light itself..
  • LONG LASTING – Up to 20 hours of continuous usage with the standard G12 series 2.0Ah battery..
  • G12 BATTERY PLATFORM – Uses G12 batteries, which is compatible with all G12 family tools: ratchet wrench, impact wrench, drill driver & polisher with more to come..
  • BARE TOOL ONLY – (Important): This is only a bare tool: a power tool that comes without a battery, a charger, or a blow mold case. Battery and charger can be purchased separately..
Check Stock

Milwaukee 46 in. 8-Drawer Roller Cabinet Tool Chest in Red/Black Textured

  • Keep your garage neat with the Milwaukee 46 in. 8-Drawer Roller Cabinet Tool Chest in Red. Excellent for heavy use, it features a 20-Gauge steel construction to ensure toughness and structural integrity. This tool storage system has 8-drawers 4 small, 3 medium and 1 large and features a total holding capacity of 15,160 cu. in. offering you plenty of storage for all your equipment..
  • Designed to accommodate heavy loads, it comes with ball bearing slides that can hold up to 100 lbs.so you can easily access the contents of the unit. With the power tool drawer, you can store your larger equipment..
  • This Milwaukee tool cabinet has a barrel key internal locking system to offer you peace of mind. It is designed with fixed and swivel casters that support up to 1,800 lbs. and features a push handle, making it easy to maneuver around. Redefine your tool organization with the Milwaukee 46 in. 8-Drawer Roller Cabinet Tool Chest in Red..
Check Stock