Best Milwaukee M1drill Driver Kit

ANTRobut 2 Pack 3000mAh Replacement Lithium 12V Milwaukee M12 Battery + M12 Rapid Charger for Milwaukee M12 Battery Charger

  • Replacement Milwaukee m12 starter kit include 2 pack 12V Milwaukee M12 batteries and 1 pack replacement m12 Milwaukee battery charger.
  • Battery Type: Li-ion/Voltage:12V/Capacity: 3000mAh/ compatible for 48-11-2411 48-11-2420 48-11-2401 48-11-2402 48-11-2401 12 volt M12 Cordless Tools.
  • Milwaukee rapid replacement charger for All 12V Milwaukee M12 Lithium-ion Battery. Diagnostics with LED indicator shows battery charging status, overcharged protection is active..
  • Both batteries and charger integrated microchip prevents overcharging lengthens battery life. Offers long-lasting performance and durability.
  • 45 days money back, 12 months warranty guarantee. Any question, you are welcome to contact us at any time, We will solve your problem.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Milwaukee 2999-22 M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Surge Impact and Hammer Drill Combo Kit

  • REDLINK PLUS INTELLIGENCE: Ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 System.
  • BUILD QUALITY: The Hammer Drill/Driver features all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
  • ADVANCED TECHNOLOGY: The M18 FUEL two-tool combo kit delivers the most advanced 18-Volt cordless cutting, drilling and fastening power tool technology.
  • POWERSTATE BRUSHLESS Motor: Purposely built for the M18 FUEL 1/2-Inch Hammer Drill to provides upto 60% More Power.
  • MILWAUKEE AUTHORIZED DEALER: Includes USA Manufacturer Guarantee.
Check Stock

Milwaukee Instruments MC720 Dosing Pump Kit

  • The Milwaukee Instruments MC720 Dosing Pump Kit combines the Milwaukee Instruments MC122 pH Controller and Milwaukee Instruments MP810 Dosing Pump to provide fully automated pH control of aqueous solutions in hydroponic systems..
  • It has been specifically designed to control the pH in mixing tanks for fertilization.
  • The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank..
  • After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

45-69-0030 Band Saw Tire FOR Milwaukee BandSaw Compact Pulley Tires 2629-20 6242-6 2429-20 (4.0' Diameter Tires)- 2 Pack

  • 【milwaukee bandsaw rubber tire 】For saws that use blade size 35-3/8 in. Compact Bandsaws Model Number: 45-69-0030，Fits Milwaukee 6242-6, 2629-20/22.
  • 【45 69 0030 pulley tire】4.0" Diameter Tires,Used with all Milwaukee Compact Bandsaws.
  • 【bandsaw tire】Compatible with Milwaukee following band saws: 2629-20 (SER C14A,B,C,D) Cordless 18V Compact Band Saw， 6242-6 (C13A,B,C) AC Compact Band Saw， 2429-20 (E25A,B) Cordless M12 Compact Band Saw， 2429-21XC Cordless M12 Compact Band Saw， 2629-22(C14A,B) M18 Cordless LITHIUM-ION Multi-Tool Kit..
  • 【FEATURES 】The belt is made of high-quality material,soft and elastic,not easy to crack, long service life,It does not dry out and crack like other rubber tires. tires can be stretched,this increases their efficiency and life expectancy..
  • 【2629 20 pulley tire】Easy to install & remove with no need for adhesive, When installing, please stretch the tire to fit the wheel tightly. Inspect belts periodically and replace when worn to maintain peak performance..
Check Stock

Red Line 90226 Powersport Motor Oil V-Twin 20W50 Powerpack Kit

  • Complete kit for motorcycles equipped with Evolution, Milwaukee-Eight and Twin-Cam engines*.
  • 2007-up H-D motorcycle with the 96-inch and larger Twin Cam engines, users must purchase one extra bottle of Primary Chain Case Oil to meet this engine’s 38 oz (45 oz dry) capacity, compared to the 32 oz wet capacity of a Milwaukee-Eight, Evolution or V-Twin case.
  • Includes 5 quarts of 20W50 Motorcycle Oil, 1 quart of V-Twin Transmission Oil with ShockProof, 1 quart of Primary Chain Case Oil, 1 bottle of Fuel Injection Cleaner for Powersports, a sticker kit, a Red Line Oil embroidered hat and a versatile funnel.
  • Each kit has been tested for compatibility and includes enough fluids for a complete oil change*.
  • Users must check vehicle specifications for capacity to ensure against overfilling, as full quarts may provide more product than necessary.
Check Stock

SDS Plus Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods, Fit All SDS-Plus Rotary Hammer Drills 13/16'X 6-11/16'(20x170mm)

  • The Industrial grade SDS-Plus ground rod driver is designed to drive 5/8" and 3/4" ground rods or rebar. Save a lot of manual hammering work..
  • SIZE : 6.7" (170mm) Length and 3/4" (20mm) ID and 1" (25mm) OD.
  • MATERIAL : SDS Plus Ground Rod Driver made of high quality hardened steel，Metal thick wall for impact, rust and corrosion resistance. One-piece design, reusable..
  • COMPATIBLE:The ground rod driver is compatible with Bosch, Dewalt, Hilti, Makita, Milwaukee and all other SDS - Plus Ground Rod..
  • SALES SERVICE:we promise unconditional replacement or refund if you have any issue with the ground rod driver. Just click 'contact seller' ,we will exert ourselves to satisfy to you!.
Check Stock

TEMCo TH0405 – 1-1/8” / 30 mm Hex Shank Demo Hammer T Post Driver Attachment

  • Fits 1 1/8” / 30mm hex shank import style Demolition Hammers – Shank style is hex with round end on - PLEASE CHECK YOUR HAMMERS VERY CAREFULLY BEFORE PURCHASE - This bit DOES NOT fit Makita, Milwaukee, Bosch, Dewalt or Hitachi hammers.
  • Turn your demolition hammer into a T-post driver with a deeper socket design the driver maintains alignment and saves time and energy driving t-post or any solid post that is less than 2” in diameter..
  • One-piece machined construction with a 2.5” long 2” Diameter Drive Socket - saves a lot of pounding with a manual t-post driver. The 2” deep socket guarantees easy installation of T posts..
  • Hardened steel body for increased durability –tool hardness specification of 45-55 Rockwell C.
  • Tool finish is perfect for commercial and industrial applications and keeps the tool from rusting (1 Year Guarantee or Full Refund. No Matter What.).
Check Stock