Best Micrometer For Weight Measurement

Digital Caliper, M MOOCK 0-6 inches Calipers Measuring Tool, Electronic Digital Micrometer Vernier Caliper with Stainless Steel Body, Large LCD Screen, Inch Millimeter Fractions Conversion/Green

  • 【Stainless Steel Digital Caliper】: Fine polished stainless steel frame with knurled thumb roller and new processing of depthometer's groove give better looking, smooth sliding, and accurate result..
  • 【Precision and Accurate Measurement】:With an accuracy within ±0.0005inch/0.01mm, this digital caliper has been a great helper for both professionals and home use;The digital micrometer glides smoothly and allows you to set zero and measure at any point of scale; Smooth and brushed stainless thumb roller easily and precision measurement..
  • 【Three Unit Conversion & Four Measurement Mode 】: It is easy to operation of unit conversion,one button quick change between three measuring modes inch/fractions/millimeter.
  • You can measure the internal, external dimensions, diameters, depth and steps with just one measuring tool. [Attention]:If there is a flickering screen, inaccurate reading, etc. that makes the caliper not work properly, please contact customer service and we will actively solve the problem for you..
  • 【Extra Large LCD Display】: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper.
Check Stock

7 PC Micrometer Tip Anvil Attachment Set Precision Ground

  • All anvils other than ball subtract .500".
  • Being held with own reinforced neoprene boots.
  • Fits any 1" to 12" micrometer anvil inch or metric.
  • Case dimension: 2-3/4''L x 4-1/2''W x 1''H.
Check Stock

Kynup Digital Caliper Calipers 6 Inch Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 150mm

  • 【Precise & Accurate】Kynup digital caliper has a measurement range of 0 - 6''/ 0 - 150 mm.
  • accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Perfect and accurate caliper measuring tool for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries.
  • 【Wide Application & Auto Off】The 6 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists, woodworkers, DIY. Auto shutdown for saving battery after within 6 minutes if without operation.
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, whic....
Check Stock

Kynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm

  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
  • 【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
  • accuracy to ±0.001”/0.02mm and resolution to....
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
  • 【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....
Check Stock

uxcell Metric Outside Micrometer, Measurement Tool Measuring Tool (a13060500ux0130)

  • Product Name : Metric Outside Micrometer.
  • Overall Size(Approx) : 128 x 50 x 19mm/ 5.0" x 1.97" x 0.75" (L*Max.W*Max.T).
  • Box Size : 140 x 65 x 25mm/ 5.5" x 2.6" x 0.98" (L*W*T).
Check Stock

Digital Caliper Measuring Tool 6 Inch Small Vernier Caliper Electronic Micrometer Machinist Woodworking Tools

  • 【Precise and accurate measurement】: Vodlbov digital caliper measuring range 0 - 6''/ 0 - 150 mm.
  • accuracy up to ±0.001"/0.02mm, resolution up to 0.0005"/0.01mm. The body of the dial caliper measuring tool is made of finely polished stainless steel with knurled thumb rollers and locking screws to ensure smooth sliding and accurate positioning when measuring..
  • 【Three-unit conversion and four measurement modes】: The unit conversion is easy to operate, and the three measurement modes of inch/fraction/mm can be quickly switched with one key.
  • you only need to use one measurement tool to measure internal, external dimensions, diameter, depth and steps..
  • 【Zero Setting Function】 Easy to set zero at any point by pressing the zero button, allows you to start a new measurement at once, ideal for differential measurements. Also zero calibration provides precise results when readouts are not accurate..
  • 【Large LCD Display】: Equipped with an easy-to-read large LCD display that displays instant readings digitally, which is more convenient than any vernier caliper or micrometer caliper.
  • Automatic shutdown after 5-8 minutes of no operation to helps you save battery power..
  • 【Wide application】: Professionals and enthusiasts can use. A great choice for me....
Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

Microscope Stage Micrometer Calibration Slide (TCM-H) with 4-Scales and 0.01mm Line Resolution

  • Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
  • Size of a typical slide (3"x1"), works well with most microscopes.
  • Great tool for microscope measurement and calibration.
Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

  • The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
  • The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
  • The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
  • Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check Stock