Best Micrometer For Acceleration Measurement

Vibration Meter AR63B Handheld Precision Digital Intelligent Sensor Vibration Meter, Auto Switch Range

  • FUNCTIONS---Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery, specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep..
  • ACCURATE MEASUREMENT---The vibrometer use the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation..
  • WORKING PRINCIPLE---Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration..
  • WIDE APPLICATION---Widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc..
  • FEATURES---Multi-functional, with temperature measurement, auto switch range, backlight, auto power off..
Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

  • TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
  • MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
  • FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
  • LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
  • APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check Stock

4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino

  • ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to ± 16g. Digital output data is 16-bit twos complement format, can be accessed via I2C digital interface or SPI (3-wire or 4-wire)..
  • The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °.
  • Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption..
  • Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming..
  • ULTRA LOW POWER: as low as 23 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V (typical)..
Check Stock

Digital Vibration Meter Vibrometer Analyzer Datalogger with 3 Parameters Displacement Velocity and Acceleration

  • ★ Displacemen, Velocity, Acceleration Measurement.
  • ★ Measurement Range: Displacement: 0.001-4.000 mm equivalent peak-peak / 0.04-160.0 mil.
  • ★ Velocity : 0.1-400.0 mm/s true RMS / 0.004-16.00 inch/s.
  • ★ Acceleration: 0.1-400.0 m/s² equivalent peak / 0.3-1312 ft/s² / 0.0-40g.
  • ★ Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes..
Check Stock

Vibrometer, 0.1~199.9m/s2 Peak Digital Vibration Meter, for Engineering Electric Power

  • It can measure the environment temperature with 2 temperature units (℃ and ℉).
  • Wide measurement range of acceleration: 0.1~199.9m/s2 peak.
  • Widely used in mechanical manufacturing, electric power, engineering, space flight and aviation and other fields.
  • Adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement.
  • LCD displays measurement result and conditions directly.
Check Stock

Kynup Digital Caliper, Caliper Measuring Tool, Micrometer Caliper with Large LCD Screen, Stainless Steel, IP54 Splash Proof, Easy Switch from Inch Metric Fraction, Large LCD Screen (6 Inch)

  • 【Accurate Measurement】The measurement range of Kynup digital caliper is 0 - 6''/ 0 - 150 mm.
  • accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Prescise and accurate vernier caliper digital. for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • 【Large LCD Screen】High quality digital vernier caliper, the large and easy-to-read LCD display helps you get precise results quickly and easily. even under strong sunlight or in dismal surroundings. Aslo the locking screws ensure that the measuring jaws are securely secured, allowing for more precise measurements..
  • 【Screen Splash Proof & Stainless Steel Material】The dial caliper micrometer is constructed of first-class STAINLESS STEEL, Screen Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface. Note: please do not install the battery backwards..
  • 【3 Units Conversion】 You can switch 3 units with the digital micrometer: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
Check Stock

Digital Caliper, M MOOCK 0-6 inches Calipers Measuring Tool, Electronic Digital Micrometer Vernier Caliper with Stainless Steel Body, Large LCD Screen, Inch Millimeter Fractions Conversion/Green

  • 【Stainless Steel Digital Caliper】: Fine polished stainless steel frame with knurled thumb roller and new processing of depthometer's groove give better looking, smooth sliding, and accurate result..
  • 【Precision and Accurate Measurement】：With an accuracy within ±0.0005inch/0.01mm, this digital caliper has been a great helper for both professionals and home use；The digital micrometer glides smoothly and allows you to set zero and measure at any point of scale； Smooth and brushed stainless thumb roller easily and precision measurement..
  • 【Three Unit Conversion & Four Measurement Mode 】: It is easy to operation of unit conversion,one button quick change between three measuring modes inch/fractions/millimeter.
  • You can measure the internal, external dimensions, diameters, depth and steps with just one measuring tool. [Attention]：If there is a flickering screen, inaccurate reading, etc. that makes the caliper not work properly, please contact customer service and we will actively solve the problem for you..
  • 【Extra Large LCD Display】: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper.
Check Stock

Micrometer Calibration Rod Stainless Steel Calibration Bars Standard Measuring Rod Calibration Blocks Caliper Calibration Rod for Calipers Outside Micrometers Calibrating 100mm

  • High Quality Stainless Steel Material: Micrometer calibration rod is made of high quality stainless steel, high hardness,not easy to deform and durable..
  • Clearly Marked: Stainless steel standard rods have clear length markings so you can quickly select the size you want..
  • Small And Portable: Standard measuring rods are of reasonable size, light weight, and easy to use and carry.It is a necessary tool for measurement..
  • 4 Optional Specifications: Calibration rod is a professional measuring tool, there are 4 different specifications for you to choose from, 25mm, 50mm, 75mm, 100mm,meet your different measurment needs..
  • Main Application: Calibration stick is mainly used for calibrating micrometers.Micrometer calibration rod is more precise length measuring instruments..
Check Stock

Kynup Digital Caliper Calipers 6 Inch Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 150mm

  • 【Precise & Accurate】Kynup digital caliper has a measurement range of 0 - 6''/ 0 - 150 mm.
  • accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Perfect and accurate caliper measuring tool for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries.
  • 【Wide Application & Auto Off】The 6 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists, woodworkers, DIY. Auto shutdown for saving battery after within 6 minutes if without operation.
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, whic....
Check Stock