Best Micro Quadcopter

That Vibe (feat. Cass XQ)

Battery discharge plug: red round banana plug. and attenstion: Red cable is positive, Black cable is negative. Charger plug: XH-3P.
Battery dimensions:90*35*16mm/3.56*1.35*0.63 inch. Upgrade capacity,real capacity is 2000-2100mAh. Voltage is 7.4V, Lipo rechargeable battery..
Please charge full the battery before use. 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacment for Promark P70 RC Quadcopter Drone, battery replacement for S yma X8C X8W X8G X8HC X8HW X8HG X8 RC quadcopter drone..
7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacement for Vivtar DRC-446 RC Quadcopter Drone with Camera.
7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacement for RC Car truck RC vehicle ,RC Quadcopter drone ,RC helicopter, RC Aircraft and RC Buggy, which use same battery voltage size and plug..

Specification: 0802 motor shaft 1.0mm, weight 1.9g/pc, compatible with 1S lipo battery, suit for 65mm-85mm fpv micro quadcopter frame.
New choice and best alternative motors of tiny whoop brushless version.
Double E-clip design, prevent Motor bell to flying off. Good Dynamic balance.
The upgraded 0802 19000KV brushless motors, insane power in tiny quadcopters.

【Equipment】Cetus Pro brushless quadcopter equipped with a Lite 1-2S Pro 12A ESC brushless Flight Controller, 1102-18000KV brushless motors and 40mm 3-blade props. The auxiliary flight function is greatly reducing the threshold of operating, which is capable of performing diverse freestyle tricks. Highly beginner-friendly and training-friendly.
【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST.
【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots’ hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. (The altitude hold function is only available in N mode).
【Self-protection Function】The Cetus Pro quadcopter has an excellent self-protection function. Which can make an emergency landing when it loses control or in low battery. It will also automatically disarm and drop on ground once it has a strong collision with the object. No more worry about loss and crash.

Package include: 8 Pack proellers（4A +4B,16 pack screw and 1 screw driver..
Props propellers blades spare parts accessories for Blomiky SJRC F11 4K Pro F11 and F11 PRO GPS Brushless RC Drone.
Props propellers blades spare parts accessories fit for RUKO F11GIM F11Gim2 F11 PRO F11 4K Pro GPS RC Quadcopter drone.
Props propellers blades spare parts accessories fit for DEERC DE22PRO DE22 PRO GPS RC Quadcopter Drone.
Props propellers blades spare parts accessories replacement fit for Contixo F24 F24 PRO and F35 GPS RC Quadcopter Drone ,F35 GPS Drone with 4K UHD Camera 2-Axis Self stabilizing Gimbal 5GHz FPV RC Quadcopter.

RunCam Mini FPV DVR Designed for Mini FPV Racing Drone Quadcopter ,Suitable for all Runcam camera. 25*25mm @ 20*20mm M2 holes, Net Weight 3.5g / 0.12 Ounces..
Lossless video output for VTX, resolution VGA 640 x 480, @ 30fps(NTSC). The DVR has been loaded,so the output of video will be amplified synchronously. Record high-frequency vibration motor audio without access to MIC.
Recording files will be saved automatically by segment per each 5 minutes and recording stops when Micro SD card is full..
It takes about 2G capacity for 1 hour recording. Thus an 8G Micro SD card can record about 3.5 hours. Max 32G SD card.(SD card not include)..
DVR won’t save the file automatically after power off. So please stop recording before power off. Otherwise, you will miss your last recording..

【Cetus Pro FPV Kit】BETAFPV Cetus Pro FPV Kit is a brushless whoop drone designed from the ground up for FPV beginners. Auxiliary flight function is available for novices, greatly reducing the threshold of operating. Cetus Pro brushless quadcopter is robust and powerful, allowing you to fly faster, race, and even do freestyle flying. Taking you from ZERO to Super Pilot in one kit.
【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST.
【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. (The altitude hold function is only available in N mode).
【Self-protection Function】The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing when it loses control or in low battery. It will also automatically disarm and drop on ground once it has a strong collision with the object. No more worry about los....

Motor Size: Diameter=6mm, Length=15mm, Motor Shaft Diameter=0.8mm.
Motor Compatible with SP350 Mini Drone RC Nano Quadcopter Each--- E61HW WiFi FPV Quadcopter.
Motor Compatible with JJRC H36 & F36 T36 NH010 E010 Mini Drone Quadcopter Mini RC UFO.
Motor Compatible with HolySt HS210 Mini Drone RC Nano Quadcopter 08 Drone NH330 NH320 KY905.

DECAL ONLY - Blade Chroma Quadcopter Not Included.
Add style to your Blade Chroma Quadcopter Drone.
Protect your Blade Chroma Quadcopter Drone from dings and scratches.
PROUDLY MADE IN THE USA: We Use Only 3M automotive-grade vinyl, the industry's most trusted brand, Mighty Skins are produced in our state-of-the-art facility in West Palm Beach, Florida..

DECAL ONLY - Blade Chroma Quadcopter Not Included.
Add style to your Blade Chroma Quadcopter Drone.
Protect your Blade Chroma Quadcopter Drone from dings and scratches.
PROUDLY MADE IN THE USA: We Use Only 3M automotive-grade vinyl, the industry's most trusted brand, MightySkins are produced in our state-of-the-art facility in West Palm Beach, Florida..