Best Micro Ohm Meter

Fluke Networks MS2-100 MicroScanner2 Copper Cable Verifier with Built-In IntelliTone Toning, Troubleshoots RJ11, RJ45, Coax, Tests 10/100/1000Base-T, and Voip

Copper cable verifier for testing voice/data/video with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments.
Includes MicroScanner2 cable verifier with detachable wire map adapter, user guide, (2) AA alkaline batteries, carry pouch, 1 year warranty.
Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, shows 4 test modes at once: Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 10/100/1000 Ethernet, POTS, and PoE.
Cable Tests include Length (460 meter or 1500 feet with resolution to 0.3 meter or 1 feet), wire map to TIA 568A/B standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables.
PoE detection: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices to rule out power as source of problems.
Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with Intellitone digital and analog toning, probe sold separately.

Closed back, around ear design. Connectivity Technology: Wired.
Powered by proprietary Sennheiser 38 millimeter, 23 ohm transducers.
Soft, replaceable ear pads for enhanced comfort.
Two cables included - 3 meter detachable cable with 6.3 millimeter jack and 1.2 meter detachable cable with 3.5 millimeter jack with in line microphone and remote for call & music control.
2 year warranty when purchased from an authorized Sennheiser dealer.

Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver.
Rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. Tube Amps do not hard-clip even....
Built in Bluetooth with 33 foot range. Built-in preamplifier. (2) sets of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player,....
Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer). USB input for music files from USB thumb drive. Usb can charge your phone....
Frequency response (3dB): 25hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm. Total harmonic distortion): =0.02%.....

COAXIAL MINI RG59 CABLE: The center conductor is made from true 75 Ohm 23AWG solid copper surrounded by an insulated layer of high-density....
HD MICRO BNC: HD Micro BNC delivers true 75 Ohm performance in a footprint 51% SMALLER THAN TRADTIONAL BNC connectors allowing four times the density.....
PROFESSIONAL APPLICATIONS: Designed for professional broadcast applications in mind. Adapt your Standard BNC connections to High Density Micro BNC....
BELDEN 4855R: 12G rated, 23AWG, 75Ohm. This cable is 100% sweep tested and is ready to meet today’s requirements of 12 Gbps data transfer. Supports....
CUSTOM CABLE CONNECTION QUALITY: Here at Custom Cable Connection, we are family owned and have been in business since 2002. We have made it our....

Features of BluTube WD Rockville BluTube WD Audiophile grade tube amplifier with Bluetooth Color 2-Tone silver with wood accent 25 watts x 2 RMS @ 8 ohm 35 watts x 2 RMS @ 4 ohm (1) set of RCA inputs to connect to any audio device like a TV Laptop or MP3 player etc.
Optical input Coaxial input Sub output Tube amps do not hard-clip even at high volumes and are extremely efficient Due to this the amp sounds more like double the rated power!.
Built in Bluetooth with 33 foot range Built-in Preamplifier Headphone output VU meter Adjustable bass and treble (2 band equalizer) USB input for music files from USB thumb drive.
Rear Speaker Terminals Banana plug / binding post outputs for 2 speakers Frequency Response ( 3dB) 22Hz-20kHz Input Impedance 47kO Input Sensitivity 300mV Output Impendence 4-8ohm Total Harmonic Distortion(THD) ≤0 02%.
Signal-to-Noise Ratio(S/N) ≥86dB Bluetooth 2 1+EDR USB Supports WAV/MP3/WMA/APE/FLAC. Unit weight 6 6 lbs Unit dimension 10 6″ x 10 2″ x 5 1″.

Indicates the Condition of Any 52 Ohm Antenna and Coax.
Designed to be Used for Base Operations or Mobile Operations.
Tests for SWR (Standing Wave Ratio), Field Strength and RF Power.
Note: The number may not return to the default zero unless you disconnect the device from the radio.
If you need a more robust SWR Meter, check out the Astatic 302-PDC2.

Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver.
Rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!..
Built in Bluetooth with 33 foot range. Built-in preamplifier. (2) sets of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc..
Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer). USB input for music files from USB thumb drive. Usb can charge your phone or other USB device. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers..
Frequency response (3dB): 25hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm. Total harmonic distortion): =0.02%. Signal-to-Noise ratio(s/n): =86dB. Bluetooth: 2.1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V/220V switchable. Unit weight: 6.6 lbs. Unit dimension: 10.6"X10.2"X5.1"..

This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].