Best Mic For Boom Pole

AISIMEE Portable Mic Boom Pole,3-Section Extendable Portable Handheld Boom Pole for Filming with 1/4" and 3/8" Threads,for Professional Shotgun Microphones Fish Pole exte.

  • ┱【PORTABLE MIC BOOM POLE】：The microphone boom arm can be smoothly extended and easily locked, Lets you place the microphone as close to the recording location as possible while still remaining out of the camera frame..
  • ┱【PORTABLE AND DURABLE】：This handheld mic boom is lightweight and retractable,making it easy to carry and hold,reducing fatigue in long shoot productions.Made of high-quality aluminum alloy material,durable, moisture-resistant and corrosion-resistant..
  • ┱【UNIVERSAL COMPATIBILITY】：With 1/4" and 3/8" double-ended conversion screws,3/8" to 5/8" conversion nuts,Allowing direct installation of various microphones,shock mounts, microphone clips,Video Light Continuous Lighting, Studio Strobe Flash,Speedlight Or Other Studio Equipment Under 6.62Lbs..
  • ┱【LENGTH ADJUSTABLE】：The boom pole arm can be adjusted from 3ft/0.94m to 8.3ft/2.52m,The twist-and-lock mechanism ensures quick and secure locks between each section..
  • ┱【COMFORTABLE GRIPS】：The top and the bottom of pipe wall is wrapped in sponge sheath, with anti-freezing and safety protection functions,and prevent it from sliding during mobile recording.Detachable design, Easy to fall off between the sections is to make it easier to clean up grit and other garba....
Check Stock

Atoptek Microphone Music Stand Tablet Smartphone Holder Mount Heavy Duty 360 Degree Swivel Clamp for 3.5 to 13.5in Phone Tablets,iPad Pro 12.9 11 10.5 Air Mini,Surface Galaxy Tab,iPhone Galaxy

  • [WIDE COMPATIBLE] Micorphone stand tablet holder Fit for 3.5 12.9in phone and tablets,Including iPhone, iPad Android, make playing and sharing music in concerts, choir class, wedding, party, meetings.
  • Either mount directly to the boom or the upper section of the straight mic stand.
  • [360degree ROTATION AND 40degree TITL]: this tabet smartphone mount Ball-Head Designed allows Swivels 360 degrees for portrait or landscape viewing. 40degree Tilt adjustment for perfect viewing angel.
  • [HEAVY DUTY POLE CLAMP]: The pole clamp is assembled from two heavy parts, durable.fit for pole diameter 0.55 inches 1.5 inches /1.4cm 3.8cm, clip with anti-slip ruber, Can be clippaned to any available pole tightly, Microphone Stand, Music Sheet Stand, Drum Stand, Cymbal Boom More.
  • [EASY INSTALLATION AND CARRY] Just screw it to mic stand, or unscrew it from a music stand for take off. small size and a light for carry.
  • [MULTPUROSE USING]: using a Variety of Home Professional Applications.
  • Great for Stage, Studio, Sound Booth More.
Check Stock

Microphone Stand, Detachable Weighted Round Base Mic Floor Stand with Boom Arm Pop Filter Mic Clips 3/8\ to 5/8\ Adapter Cable Ties, Height Adjustable from 48\ to 63\ for Snowball Blue Yeti

  • 【All-in-one Mic Stand Kit】This heavy duty compact base microphone stand kit include: a round base microphone stand, many accessories: a telescopic boom arm pole, a diameter 15.5cm pop filter, a clothespin-style mic clip, a egg-style barrel mic clip, a 92inch XLR male to female mic cable, a 3/8" to 5/8" adapter, 4 mic cable ties..
  • 【Strengthened Round Base Floor Mic Stand】Solid die-cast base for about 9.8inch/248mm in diameter and 3.9LBS/1.77kg in weight. Thickened & larger support steel pipes: diameter 25mm under height clutch, diameter 20mm above height clutch, pipe thickness: 2mm. 7.28LBS counterweight for a stable microphone placement, this mic stand will provide stability and precise balance to avoid it from falling..
  • 【Adjustable Design】Raise or lower height adjustment from 48" inch to 63'' inches. Telescopicboom arm pole length can be adjusted from 17" to 33" and 175°rotation. Also, the stand used USA standard 3/8 thread screw head, and coming with a 3/8" to 5/8" adapter for mounting most microphone and shock mount..
  • 【Reliable Microphone Holder】Made of premium steel, the upgraded steel pipe is thickened to 2mm, compared to only 1mm thick of other stands on the market, sturdy enough to support your microphones, not easy to become def....
Check Stock

Mic Stand Extension Tube 4 Pieces 5/8 Inch Microphone Extension Pipe Aluminium Alloy Stand Extenders Screw Boom Tubes Microphone Extension Rod with 2 Metal Adapters for Desk Stand Arm Stand, Black

  • Make Your Microphone Closer: the microphone boom extension and mic stand adapter can connect together to extend the length of your microphone arm or the height of your mic stand, bringing your microphone close to you and your instruments, thus you can get a better recording effect.
  • Proper Size to Extend Mounts: each mic stand extension tube measures approx. 3.35 inches in total length, with a 5/8 inch male thread and a 5/8 inch female thread, and the adapters come with 5/8 inch male threads and 3/8 inch female thread, suitable for you to attach to your stands and mounts.
  • Work with Most Stands: the microphone extension pole can fit most microphone stands, boom arms and most microphones well, allowing you to record your performance better, and they can also work well with your devices with the same screw, bringing you much convenience.
  • Serve A Long Time: our mic stand extenders and metal adapters are made of quality aluminium alloy, sturdy and reliable, not easy to break or deform, adopted sandblasting on the surface, painted in classic black, delicate in appearance and comfortable to touch, offering you a pleasant experience.
  • Easy to Install: you only need to screw the extension tube onto the cantilever or microphone holder, if you need a metal adapter to....
Check Stock

QuadCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX QuadCast, QuadCast S – RGB USB Condenser Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
  • 【Mic stand】- Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting HyperX QuadCast..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount，Pre-installation completed). Note: NOT INCLUDED STREAMING MIC..
Check Stock

Professional Heavy Duty Studio Overhead Boom Stand with Wheels by AxcessAbles| Telescoping Arm | Folding Tripod Legs| Mic Boom Stand | Shotgun Video Mic Stand | (MB-W)

  • Studio boom mic stand with 4' 5" – 8' 2" extending boom arm for studio condenser, video shotgun or overhead drum microphones..
  • The 180 degree wheel joint allows you to smoothly rotate the boom pole in any vertical or horizontal directly and lock it in place with the tightening handle..
  • The tall tripod stand height : 4' 2" (50 inches) – 6' 10" (82 inches)..
  • Full metal construction provides a weighted base for securing your valuable microphones. 1.5" and 1" metal tube construction for stability and durability..
  • Boom arm comes with a 2.5 lb moveable counterweight. This is an heavy duty tall microphone stand with telescoping extension arm..
Check Stock

Rode SM4-R Suspension Microphone Shock Mount for 3/8\ or 5/8\ Thread Mounts

  • A suspension shock mount for mounting various RODE microphones onto a mic stand or boom pole with 3/8" or 5/8" thread.
  • Equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations.
  • The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning.
Check Stock

Apogee Boom USB Audio Interface For Musicians, Podcasters, and Streamers - features Studio Microphone Pre Amp, Zero-Ohm Headphone Amp, Ableton Live Lite, comes with free Apogee plugins

  • Stand Out with Superior Sound Quality: For almost four decades, Apogee has been perfecting the art of analog recording in the digital world. Boom features premium AD/DA components and sample rates up to 24bit/192kHz that will open you up to a whole new level of sonic clarity & depth. No audio codecs are used in our audio interfaces..
  • Recording Workflow: Boom is the first usb audio interface in its class to offer hardware DSP. This allows you to power our Symphony ECS Channel Strip plugin on either input or both simultanesouly. Symphony ECS Channel strip gives you access to a 3-Band EQ, compressor, and saturator, all tuned by Bob Clearmountian. Print or monitor with FX from BOOM while you record with zero latency..
  • 2 In - 2 Out: Boom comes with 2 studio quality Inputs (1 balanced mic/line/instrument combi input & 1 balanced ¼” instrument/line input) and 2 outputs. Connect your mic, guitar, or synthesizer to the inputs on the front and your speakers or headphones to the outputs on the back..
  • A Mic Pre Worth Talking About: Boom provides all the clean, noiseless gain to power any mic without fail. Boom offers 62 dB o....
Check Stock

InnoGear Microphone Stand, Desk Mic Stand Adjustable Boom Arm Stand with 3/8' to 5/8' Screw Adapter Mic Clip for Blue Yeti, Yeti Nano, Snowball and other Mic

  • Height & Angle Adjustable: By rotating the height clutch, the height of stand is adjustable from 10.8 inches to 14 inches. The boom arm swivels and has a good range of motion. The included mic clip can be rotated by 180°. Easy to use and set up the height and angle you want..
  • Lengthened Boom Arm: The telescoping boom arm is upgraded to two-section, compared to single-section arm of others on the market. The length of boom arm is adjustable from 16 inches to 28 inches. Sturdy, silent and great reach. Noted: When it goes to the max length, recommended to have the second pole remained 1 inch inside the boom arm..
  • Enhanced Load-bearing: One 1.1lbs solid counterweight is fixed to one end of the boom arm, improving the load-bearing capacity. When the arm is at the min length of 16 inches, it reaches the max load of 6.6lb/3.0kg and when the arm is at the max length of 28 inches, it reaches the min load of 3.3lb/1.5kg. Strong enough to hold your microphone steadily while in use..
  • Upgraded Table Mounting Clamp: With the mounting position of the stand in the center, the upgraded desk clamp could stably clip to any desktop up to 2.2 inches thick. The diameter of metal gasket is increased to 38mm to enlarge contact surface and further enhance stability. A rubber p....
Check Stock