Best Metric Tapered Roller Bearing

FAG NUP2309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Two Piece, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 36mm Width

  • FAG cylindrical roller bearing with a removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

FK Bearings COM12T 3/4 Spherical Bearing with Teflon Commercial Series, 1 Pack

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft.
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.
Check Stock

SKF NJ 2207 ECP Cylindrical Roller Bearing, Single Row, Removable Inner Ring, Flanged, Straight Bore, High Capacity, Normal Clearance, Polyamide/Nylon Cage, Metric, 35mm Bore, 72mm OD, 23mm Width

  • Item: NU206EG Cylindrical Roller Bearing.
Check Stock

Silicone Hand Roller, 40mm Silicone High Temperature Resistant Pressure Roller for Roofing Hot Air Heating PVC Welding, 1.6 x 1.3inch

  • FREE 7 Drawer Roller Cabinet, 27 Piece 1/2" Drive Socket Set, 89 Piece 1/4" Drive Socket Set, 13 Piece Mixed Drive Extension Bar Set.
  • 36 Piece 3/8" Drive Socket Set, 5 Piece Pliers Set, 15 Piece Metric Combination Spanner/Wrench Set.
  • 11 Piece Mixed Screwdriver Set, 4 Piece Adjustable Wrench Set, 7 Piece T Handle Hex Key Set, 5 Piece Flat & PH Type Screwdriver Set.
  • 14 Piece Punch & Chisel Set, 7 Piece T Handle TX Key Set, 7 Piece Metric Combination Spanner/Wrench Set.
  • Roller Cabinet Features Heavy Duty Handle, Key Lock, 7 Bearing Mounted Drawers, Two Fixed Castors & Two Swivel Castors With Brakes. Lifetime Warranty.
Check Stock

INA SL045014 Cylindrical Roller Bearing Double Row Fixed Normal Clearance Open End Oil Hole Metric 70mm ID 110mm OD 54mm Width 3600rpm Maximum Rotational Speed 61000lbf Static Load Capacity 38500lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

30206 Tapered Roller Bearings, Single Row 30x62x17.25 mm Same Day Shipping

  • Tapered Roller Bearing Set (Cup and Cone).
  • Bearing ID: 1.25” (31.750mm) Cone Width: .6600” (16.764mm) Bearing Width: .6250” (15.875 mm).
  • Cup OD: 1.7810” / 45.237mm Cup Width: .4750” / 12.065mm.
Check Stock

4 Set Fits for 25mm Axles Trailer Wheel Hub Bearings Kit 32205 Bearings Rotary Quiet High Speed and Durable for Tapered Roller Bearings.

  • Product Size. The bearing rotates quietly and at high speed, and the high-quality chrome steel bearing is durable. Product material: steel.
  • number of rolling element columns: single column.
  • Easy to Use. The outer ring and inner parts (inner ring, roller and cage parts) of the ball bearing can be separated for easy assembly and disassembly..
  • Multiple Usage. Ball bearings are used in machine tools, papermaking machinery, mechanical gears, motors, wind generators, steel equipment, mining equipment, injection molding machines, textile machinery, doors and windows, roller skates, toys, etc..
  • Made by Experts. The manufacture of professional bearings for tapered roller rotators began in 1945, which is worthy of your discovery and trust..
  • Customer Service. 1 year/50,000 miles free replacement or refund without reason, don’t worry about buying..
Check Stock

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock