Best Meter Errors Testing

Oakton AO-35423-01 EcoTestr pH 2+ Pocket pH Meter 1 pack

  • ...erfect pH balance and safe for use with Tester precision pH accuracy. Tester has a sensitive electrode sensor to read accurate pH levels. The included detailed manual will show you how to get the best accurate and stable reading..
  • AUTOMATIC TEMPERATURE COMPENSATION: No more need to take care about the temperature of testing liquid, as ph meter has built in (ATC) automatic temperature compensation, so that it can accurately determine pH value of the sample at any temperature in a range of 0 DegreeC - 80 DegreeC (32 DegreeF - 176 DegreeF)..
  • WIDE USE: Pocket Size PH Meter is the ideal test kit for home and laboratory uses.Suitable for testing the pH of drinking water, swimming pools, aquariums, reverse osmosis systems, spas or hydroponics.
  • ideal for testing water, swimming pools, aquariums, spas, hydroponics, food, wine and beer, etc..
  • MAKE YOU SATISFIED WITH THE PRODUCTS: Come with 1x PH meter, 1x user manual, 2x 1.5V LR44 button cells(build-in), 3x PH Buffer Powders..
Check Stock

Ketone Breath Analyzer with Upgraded Semi-Conductor Sensor -White

  • Cautions before measurement: Be cautious about factors that may affect your results because the device is with high sensitivity sensor and avoid brushing your teeth, smoking, drinking or eating foods 30minutes before taking the test for accurate results. In order to accurately analyze and track your testing readings, we strongly recommend testing your ketone levels under the same conditions each time right after waking up in the morning before consuming anything in fasting status!.
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat burning, and 80% of fat that we burn leaves the body through the lungs.
  • The ketone monitor needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, pleas....
Check Stock

Glucomate Blood Glucose Monitor Kit – Blood Sugar Test Kit with 1 Glucometer, 50 Diabetic Test Strips, 50 30G Lancets, Lancing Device and Diabetes Testing Kit Travel Case

  • ALL-INCLUSIVE BLOOD SUGAR MONITOR KIT: Our glucose meter kit with strips and lancets includes: (1) OWELL Glucomate HT100 Blood Sugar Meter, (50) Blood Glucose Test Strips for diabetes, (1) Lancing Device, (50) Lancets for diabetes testing, (1) Control Solution, (2) AAA Batteries, (1) Glucose Meter Case for your blood sugar tester and diabetic supplies, (1) User Manual, (1) Quick Reference Guide and (1) Log Book..
  • ADVANCED BLOOD SUGAR TEST KIT: OWELL Glucomate HT100 Glucose Meter delivers results in only 5 seconds with just a 0.7µL blood sample. Our coding-free meter requires no programming since our blood sugar monitor automatically recognizes batch codes encrypted on our Glucomate HT100 glucose test strips. Our advanced technology glucometer kit with strips and lancets has a one touch safety strip ejector for safe strip ejection, so you can hygienically remove used diabetic test strips..
  • ACCURATE GLUCOSE MONITOR KIT: OWELL blood sugar monitor kit with strips can save up to 500 readings. The blood glucose test kit provides a continuous 14-day average of your readings, with a large screen display and 4 alarm reminders for next ez use. Our glucometer strips uses GDH- FAD reagent technology with a testing range of 20 – 600mg/dL providing one of the mos....
Check Stock

AZ-86031 5 in 1 Water Quality Meter Dissolved Oxygen Tester PH Meter PH Conductivity Salinity Temperature Meter AZ86031

  • The 86031 Combo Water Testing Meter can measure the pH, Conductivity or TDS or Salinity and Dissolved oxygen depend on which kind of probe attach to the meter or user could attach three kinds of probes at the same time. So the 86031 Multiple Parameters Water Testers could be operated as the pH meter, conductivity meter, TDS meter, Salinity meter or D.O. meter as user needed..
  • We design different color connector on the meter, user only needs to screw on the probe with the same color, and then get the measuring reading accurate and fast..
  • User could change the probe or screw on the 86031 Combo Water Quality Measuring Instrument easily. And in order to avoid broken by the stone or particle attacking in the measuring environment, we have developed the specific anti-collision cap on each probe. So the 86031 Combo Water Testing Meter would be the best tool for all professional measuring purposes, including the Aquaculture, Aqua farm, LAB, swimming pool or water treatment business, or other related industry, no matter the fresh or sea water..
  • AZ 86031 Combo Water Meter- pH/Conductivity/Salt/TDS/D.O was being designed and manufactured by AZ Instrument, a well experienced manufacturer for pH EC Meter..
  • Large LCD to display multiple parameters simultaneously: pH,....
Check Stock

MESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter

  • This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
  • Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
  • Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
  • Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check Stock

Breath Ketone Meter Portable Ketosis Breath Analyzer with 10 Mouthpieces for Personal Use

  • The ketosis breath analyzer needs to be exhausted before your first use. To do this, turn on the ketone breath meter, wait for the 20 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow immediately within first 5-6 seconds when displaying "blo" on the ketosis tester, since the ketone breath tester starts analyzing the breath right after the first 6 seconds.
  • This ketone breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Keto breath meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5-6 seconds.
  • Ketosis breath meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. Ketone breath meter with 3 LED indications: Green Light (Ketosis Reading Successfully), Amber Light (Low Battery), Red Light (Ketosis Reading Unsuccessfully).
  • Cautions before measurement: Be cautious about factors that may affect your results because the device is with high sensitivity sens....
Check Stock

MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Sugar? Nah, I am Sweet Enough: A Discreet Diabetic Food Journal Log Book To Record Glucose Readings (Sugar Sweet Enough Series)

  • [COMPLETE STARTER KIT] - CareSens N Plus Bluetooth Diabetes Testing Kit includes 1 blood glucose meter, 100 blood sugar test trips, 1 lancing device, 100 lancets, and a traveling case to provide you with the most affordable and convenient way for blood sugar testing. Our blood sugar test kit saves up to 250 tests and has a battery life of 1000 tests..
  • [SMALL SAMPLE SIZE] - CareSens N Plus Bluetooth Blood Sugar Monitor requires only a small blood sample size of 0.5 μL, making finger pricking easy and painless. CareSens N Plus Bluetooth Diabetes Test Strip is auto coded and automatically recognizes the batch code encrypted on CareSens N Plus Bluetooth Blood Glucose Test Strip..
  • [FAST RESULTS] - CareSens N Plus Bluetooth Blood Glucose Meter provides fast results in just 5 seconds, making blood sugar testing fast and convenient. Our Glucometer Kit comes with a handy traveling case that can hold all your diabetes testing kit so that you can measure your blood sugar at the comfort of your home or anywhere else..
  • [FAST RESULTS] - CareSens N Plus Bluetooth Blood Glucose Meter provides fast results in just 5 seconds, making blood sugar testing fast and convenient. Our Glucometer Kit comes with a handy traveling case that can hold all your diabetes testing ....
Check Stock

Professional Ketone Breath Analyzer Portable Digital Ketosis Breath Tester with 10 Mouthpieces for Ketosis Testing

  • The ketosis breath analyzer needs to be exhausted before your first use. To do this, turn on the ketone breath meter, wait for the 20 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow immediately within first 5-6 seconds when displaying “blo” on the ketosis tester, since the ketone breath tester starts analyzing the breath right after the first 6 seconds.
  • This ketone breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Keto breath meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5-6 seconds.
  • Ketosis breath meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. Ketone breath meter with 3 LED indications: Green Light (Ketosis Reading Successfully), Amber Light (Low Battery), Red Light (Ketosis Reading Unsuccessfully).
  • Cautions before measurement: Be cautious about factors that may affect your results because the device is with high sensitivity ....
Check Stock