Best Metal Square

Silverstar 16 PCS Square Silicone Chair Leg Protectors, ( Black 2 Inch X-L).

  • [Square Chair Leg Cover Felt Bottom Easier Slide] – Square Chair leg cap and felt are through new technology compressed as one body, this Black Square Chair Leg Feet Cover wooden floor protectors are durable and the felt will never detach. These chair leg caps protectors can protect furniture legs and wooden floor from damage..
  • [Stretchable & Fit Square Chair Leg Well] - The new chair furniture leg Feet covers with bottom flexible and stretchable to best fit square shaped furniture legs just like the silicone furniture caps. Recommended Size:Square length from 1.77" to 2.01" (45-51mm).circumference of 7.09" to 8.03" (180-204mm)..
  • [Chair leg Cups are Easy to Install & Stay Tight] - 16 Pieces Silicon Furniture Feet Covers Felt Bottom is made from soft gel and Felt, durable and lasting longer, fits various size Square furniture feet: Kitchen chairs, tables, dining room chair, sofa, couch, bar stool, Beds, Dressers, patio chairs, metal bistro chairs, desk chairs etc. Simply stretch and put them on, no nails, gels or tools needed to install so it won’t damage furniture..
  • [Anti-aging] -square chair leg cover floor protectors reduces noise, protect wood floors and the felt make it much easier to slide when chairs move. All materials are Eco friendly and to....
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Silverstar 16pcs Square Silicone Chair Leg Floor Protectors.(1-1/2" Black Large).

  • [Square Chair Leg Cover Felt Bottom Easier Slide] – Square Chair leg cap and felt are through new technology compressed as one body, this Black Square Chair Leg Feet Cover wooden floor protectors are durable and the felt will never detach. These chair leg caps protectors can protect furniture legs and wooden floor from damage..
  • [Stretchable & Fit Square Chair Leg Well] - The new chair furniture leg Feet covers with bottom flexible and stretchable to best fit square shaped furniture legs just like the silicone furniture caps. Recommended Size:Square length from 1.26" to 1.54" (32-39mm).circumference of 5.04" to 6.14" (128-156mm)..
  • [Chair leg Cups are Easy to Install & Stay Tight] - 16 Pieces Silicon Furniture Feet Covers Felt Bottom is made from soft gel and Felt, durable and lasting longer, fits various size Square furniture feet: Kitchen chairs, tables, dining room chair, sofa, couch, bar stool, Beds, Dressers, patio chairs, metal bistro chairs, desk chairs etc. Simply stretch and put them on, no nails, gels or tools needed to install so it won’t damage furniture..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock