Best Metal Roofing Screws With Washerss

DEKTITE #1 DF101G Gray EPDM Flexible Round Pipe Flashing Dektite fits OD Pipe Sizes 1/4 - 2-1/2 - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite

Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
Continuous Service Temperature Ranges of -58F to 239F (EPDM).
Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.

Easily customized to accomodate a broad range of pipe diameters.
Non-fading EPDM collar provides maximum resistance to weathering caused by ozone and UV rays.
Engineered for profiled roofing systems at any pitch.
Use silicone sealant between base and surface, and secure with sheet metal screws.
Slides over pipe - for pitch to 45 degrees.

Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head.
Metal Screws are painted to closely match many brands of metal roofing though color may vary.
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).

Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
Non-toxic, eco-friendly, low VOC & made in the USA.
1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Dimensions: Diameter .203" - Width .438" - Head Height .094" - Length 1.5" - Use T25 Torx/Star.
Ultra-thin flush finish pancake head fastener for Metal to Wood standing seam roofing applications.
Low profile pancake head fastener with sharp point tip, easily push through pre-drilled metal panels.
Screws have a zinc coating to prevent rusting and corrosion.
Low Profile, thin pancake head screws lay flush prevents screw head from dimpling panels.

Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
Non-toxic, eco-friendly, low VOC & made in the USA.
4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..

Co-Fair Instant Waterproof Repair and Re-Roofing.
Just press in place for a permanent repair.
Five puncture resistant layers, 10 year material warranty Use Quick Roof for hundreds of repair projects: Metal and flat roofs RV and mobile homes Trucks and trailers Gutters and flashings. Skylights Anywhere leaks are a problem, 6 inch x 25 inch..