Best Marine Inspection

CZC AUTO 12V LED Submersible Left and Right Trailer Lights Stop Tail Turn Signal Lights for Under 80 Inch Boat Trailer Truck RV Marine-Replacement for Your Incandescent Bulb Units

  • ...common: Stop/Turn/Tail/Rear reflector/side reflector/side marker light. 1 additional function for left trailer light: license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicles, like boat, trailer, truck, snowmobile, etc..
  • All diodes are LED, NOT incandescent bulbs: 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime. The waterproof trailer tail lights comply with DOT standards which is tested by US lab.
  • Excellent Waterproof/Submersible Lights for Trailer: Sonic Welding Whole Sealing Technology ensures sealing solidity of the LED tail lights. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens. 18 gauge pure copper wires ensure trailer lights LED do good job underwater.
  • Easy to Install: 2 optional mounting ways - mounting on the back or the side of the trailer. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram comes with trailer lights, you can also find it in detail page.
  • CZC AUTO, a reliable brand in trailer lights industry, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues.
Check Stock

Five Oceans Marine Deck Access Hatch with Locking Slam Latch Handle, Off-White UV-Stabilized Polypropylene, 15-11/16 inches (398mm) x 12-7/8 inches (327mm), Easy Installation, Water-Tight, FO-2347-1

  • This FIVE OCEANS Off-White Marine Access Hatch is made for floor mounting due to low-profile design. Thanks to its locking system it is impossible for the lid to flex and allow water to enter. Water-tight, it includes rubber seal..
  • It is built with high impact material, UV-Stabilized Polypropylene, to withstand rough weather conditions..
  • It has a smooth-textured lid with reinforcement ribs for added strength. Hinge offers a 120 degrees lid opening and the handle is a locking slam latch..
  • This hatch is ideal for additional storage (bait, daily catch, fuel line access or any other compact equipment), for ventilation or Marine inspection..
  • Easy installation thanks to pre-drilled holes. Screw Caps are included (to cover the screws).. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

SEA FLO 4\ - 8\ White Circular Non Slip Inspection Hatch w/Detachable Cover (8\)

  • 4''Marine Screw Out Deck Plate Inspection Hatch Plastic Access Boat.
  • Strong ABS Molded Design, Anti-Aging, Anti-Corrosive, Ultraviolet Resistant.
  • Inside Diameter: 4"(101mm).Outside Diameter: 5.6"(143mm).
  • Durable Water-Tight O-Ring.Reinforced design with a non-slip surface.
  • Easy to install, Pre-drilled countersunk holes (screws not included).
Check Stock

210Pcs Copper Wire Lugs AWG 2 4 6 8 10 12 with Heat Shrink Set, 100Pcs Battery Cable Closed End Tubular Ring Terminals Connectors with 110Pcs Heat Shrink Tubing Kit

  • ...dhesive heat shrink tubing tubes to meet your different needs..
  • 【High-Quality】: All the ring terminals are made of annealed electrolytic grade copper for maximum current flow, and the surface is tin-plated to protect the copper from corrosion, which has good electrical conductivity and heat resistance. Also, the inspection window design allows visual inspection of proper wire insertion. The heat shrink tubing is made of polyolefin material, which is non-toxic and flame retardant..
  • 【Wide Applications】: Contains the 10 kinds of most commonly used copper wire lugs. Suitable for use in distribution box, marine, golf carts, solar panels, home applications, etc. Heat Shrink Tubing is Ideal Used for Vehicle, Motorcycle, Boat, DIY Electrical Wirings and Other Outdoor Applications..
  • 【Upgraded & Easy to use】: All the cable lugs are a common size that meets the US standard. Designed an inspection window to help you work better, and each copper lug has a specification mark so that you can quickly find the right terminal..
  • 【Buy with Confidence】: If you have any questions about your purchase, please contact us. We always will work on every inquiry to ensure your satisfaction..
Check Stock

Kuject 320 PCS Heat Shrink Wire Connectors Multipurpose Waterproof Electrical Wire Terminals kit Insulated Crimp Connectors Ring Fork Spade Butt Splices for Automotive Marine Boat Truck

  • 【Multiple Choices】Proper ratio of various types to meet the commonly used types needs. This wiring terminals kit contains ring, fork, spade, and heat shrink butt connectors..
  • 【Stronghold and Durability】We adopt premium copper core to ensure good electrical conductivity and durability. Heat shrink crimp connectors provides greater pull strength..
  • 【Waterproof】With the adhesive melted when heated, the heat shrink tubing seals all the way to the end of the barrel. The connections were to be outside or inside the vehicles, will perform good water proof..
  • 【Straightforward Visual Inspection】Translucent, adhesive-lined polyolefin tubing for straightforward visual inspection, prevents wire corrosion, and provides a waterproof seal..
  • 【Wide Applications】Good electrical conductivity and water proof provide durable connection for your automotive, motorcycle, and marine application. Widely used on multiple projects of your vehicle or ATV lighting, motorcycle stereo, boat electronics, equipment switches..
Check Stock

SHENGHUISS 2 Pcs 1 inch Bimini Top Cap Eye End Boat Fitting Stainless Steel 316 Fits 1 inch O.D. Round Tubing with L Shape Hex Key

  • Bimini Top Cap Size: Each eye ends measured approx 1.25'' O.D, 1'' I.D, fits for 1'' O.D. round tubing. One screw on each fitting measured M6. Pin: 1/4" bolt holes..
  • 1’’ external eye end has shining polished looking and smooth touch.Perfect replacement for marine hardware and accessories, widely used for boating,bass boat,fishing boat, kayak, canoe, yacht,etc..
  • Bimini Top Cap Cast from marine grade stainless steel 316 .Seawater corrosion resistance. stainless steel 316 bimini top eye end is a perfect choice to replace your plastic, nylon or broken fittings..
  • Outside eye end for bimini top,This product is suitable for 1 inch tube, We use the international standard 1 inch tube for dimensional inspection to ensure that each product can be installed normally.
  • Package Includes:2 pieces of Bimini top cap and 1 piece of L Shape Hex Key.
Check Stock

Kuject Heat Shrink Wire Connectors, Multipurpose Waterproof Electrical Wire Terminals kit, Insulated Crimp Connectors Ring Fork Spade Butt Splices for Automotive Marine Boat Truck (200PCS)

  • 【Multiple Choices】Proper ratio of various types to meet the commonly used types needs. This wiring terminals kit contains ring, fork, spade, and more butt connectors which is easy to be consumed in your project..
  • 【Stronghold and Durability】Premium copper core adopted to ensure good electrical conductivity and durability. Heat shrink crimp connectors provides greater pull strength and superior proof to abrasion..
  • 【Insulated and Waterproof】With the adhesive melted when heated, the heat shrink tubing seals all the way to the end of the barrel. The connections were to be outside or inside the vehicles, will perform good water proof..
  • 【Straightforward Visual Inspection】Translucent, adhesive-lined polyolefin tubing for straightforward visual inspection, prevents wire corrosion, and provides a waterproof seal..
  • 【Wide Applications】Good electrical conductivity and water proof provide durable connection for your automotive, motorcycle, and marine application. Widely used on multiple projects of your vehicle or ATV lighting, motorcycle stereo, boat electronics, equipment switches..
Check Stock

Kuject 130PCS Heat Shrink Butt Connectors 4 Sizes Insulated Waterproof Wire Connector kit Tinned Copper Electrical Crimp Connectors for Automotive Marine Boat Truck Stereo Joint

  • 【Economical and Proper Quantity Ratio】: We have configured the ratio of each color according to the survey by the needs of some DIYers, so that you will not worry about not having the right size in your most projects..
  • 【Seamless Tubes Design】: Lined with a polyolefin adhesive glue so that when crimped onto the wire ends and heated the terminal is completely sealed against air, water, moisture..
  • 【Stronghold and Durability】: Heat shrink crimp connectors providing greater pull strength. And the tubing does not shrink in length when heated..
  • 【Straighforward Visual Inspection】: Translucent, adhesive-lined polyolefin tubing for straightforward visual inspection, prevents wire corrosion, and provides a waterproof seal..
  • 【Wide Applications】: Includes 4 sizes, 130 pieces in total, 20 pieces White (A.W.G.:26-22), 50 pieces Red (A.W.G.:22-16), 50 pieces Blue (A.W.G.:16-14), 10 pieces Yellow (A.W.G.:12-10), which comes within a storage box. It provides a robust solution for most wire connections such as for marine, aircraft, automobile, car and boat..
Check Stock

Five Oceans FO296 Marine Round Inspection Screw-in Deck Plate, 4 inches, Anti-Aging, Anti-Corrosive and UV-Resistant ABS Plastic, White

  • This FIVE OCEANS Marine Round Inspection 4 inches screw-in deck plate is made of anti-aging, anti-corrosive and UV-resistant ABS plastic with smooth finish..
  • Deck Plate is leak-proof. SCREW-IN style has a single-start, non-jamming (no cross-threading). Separate cover plate and chassis for easy installation. Screws not included..
  • It is designed with a rubber O-ring that creates a watertight seal for safety and allows to be used for interior and exterior applications. It includes a safety lanyard to secure the lid cover..
  • OUTSIDE Diameter is 5-5/8 inches (143mm), INSIDE Diameter is 4 inches (102mm) and CUTOUT is 4-7/16 inches (113mm)..
  • Use silicone sealant on the hull or deck surface when installing the deck plate.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock