Best Marine Flotation Foam

AWF PRO Sikaflex 1a Kit - One Component, Flexible, Non Sag, Polyurethane Concrete and Masonry Sealant for Vertical and Horizontal Surfaces, Sikaflex 1a 10 oz Limestone (12), AWF 2000 Caulk Gun (1)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

STEARNS Utility Flotation Cushion Blue 16- Inch x 14-3/8- Inch

  • Utility cushion doubles as a comfortable place to sit and as a flotation cushion.
  • US Coast Guard-approved Type IV flotation device.
  • Soft polyester shell and durable Crosstech flotation foam.
  • Strong 1-inch webbed straps make it easy to hold onto and aid in rescue.
Check Stock

GREENWISH Swim Belt Child for Kids 50-90lbs, Bouyancy Belt for Children Perfect for 5-12years Old Kids Swim Beginner

  • ...st float around. Swim belt to make you learn better.
  • HIGH DENSITY EVA FOAM: EVA environmentally friendly materials, high foam processing technology. Thicker buoyancy. Made of High-density Eva Foam which will durable and not absorb water and give more balance and sufficient flotation.
  • ADJUSTABLE BELT: The belt is adjustable according to your waistline, which fits most children.
  • The swimming belt is suitable for swimmers below 90LB.
  • REMOVEABLE BLOCK: You can remove some foam blocks when your kids get stronger and more confident.
  • As with any exercise flotation device, make sure to adjust the belt snugly so it doesn't move upward as you exercise.
  • WARMING TIPS: The flotation device for kids is mainly used to help beginners learn swimming instead of a life-saving product.
Check Stock

Stearns Adult Classic Series Vest, 3000004475, Blue, Universal

  • US coast guard-approved adult life jacket.
  • Soft polyester shell and durable Crosstech flotation foam.
  • Open-sided design and 3 adjustable buckles for breathability.
  • Designed for adults weighing 90 pounds or more.
  • For use on a boat, a personal watercraft or for tow sports.
  • Two adjustable straps and open sides for better fit.
  • Durable construction: Nylon shell, Crosstech Flotation Foam, 2 - 1 inch webbed straps.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 6LB. Density polyurethane flotation Foam 1 Quart Kit.
  • Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

Hardcore Water Sports Youth Life Jacket Vest for 50-90 lbs. | US Coast Guard Approved Type III (Blue)

  • ...g, hunting, fishing, canoeing, kayaking, etc. Ideal for calm inland waters, or where there is a good chance for fast rescue..
  • QUALITY - UL listed life jacket is made from high quality polyester cordura fabric and closed cell PE foam. Includes 1" adjustable straps and quick-release buckles. Hardcore Water Sports flotation aids are made for comfort and durability. Although the vest is made in China, it is designed in the US by an American company. We provide our customer service here in California and our goal is always for 100% happy customers..
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Quart Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1/2 Gallon Kit.
  • Consists of 1 quart of Part A and 1 quart of Part B and produces 1 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock