Best Manzo Headers

SparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started

The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).

Designed exclusively for 8th generation Intel Core processors to maximize connectivity and speed.
5-Way Optimization with Auto-Tuning and FanXpert 4 automatically tailors overclocking profiles to your unique build for maximum OC performance and dynamic system cooling.
Dedicated water cooling headers allow monitoring of water temperature and flow without a dedicated standalone controller.
Unmatched Personalization with ASUS exclusive AURA Sync RGB lighting, additional RGB headers, and addressable RGB headers for all AURA sync enabled products.
Industry-leading 8-channel HD audio with dual headphone amplifiers and ROG exclusive SupremeFX S1220 CODEC driven by Japanese capacitors.

The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Support for external 5V~12V DC power supply, Support power supply by 9V battery..
The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..

Exhaust Headers(11-17 Dodge Hemi 57L Shorty Tuned Length - 1-3/4in Chrome).
As always BBK Performance exhaust headers are CNC mandrel bent for maximum performance right out of the box.

*The Nano is using the chips ATmega328P and CH340, Replace FT232RL..
*It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
*Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
*The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
*Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)..

Turn on and off lamps, fans, solenoids, and other small appliances(up to 250VAC or DC power) using any Feather board.
Compared to Adafruit's smaller Relay FeatherWings, this can handle a beefy 1200 Watts.
Works with all/any of our Feather boards, just wire up the relay control pin to whatever GPIO you like.
Connect a FeatherWing on top of your Feather board with Feather Stacking Headers or Feather Female Headers.

...erclocking, AI cooling, AI networking(GameFirst VI) and AI noise cancellation.
Robust Power Solution: 10+1 power stages with ProCool II power connector, high-quality alloy chokes and durable capacitors to support multi-core processors.
Optimized Thermal Design: VRM heatsink, triple decker M.2 heatsink, hybrid fan headers and Fan Xpert 4 utility.
High-performance Gaming Networking: On-board WiFi 6E and Intel 2.5 Gb Ethernet with ASUS LANGuard.
Best Gaming Connectivity: Supports HDMI 2.0 and DisplayPort 1.4 output,and featuring 2xM.2 and USB 3.2 Gen 2x2 Type-C, Front panel USB 3.2 Gen 2x2 Type-C connectors and ITX expansion card(features 4 SATA ports, Front Panel headers, Front Speaker header and one ARGB port).
PC DIY Friendly: SafeDIMM, PCIe 5.0 Safeslot, Q-LED, M.2 Q-Latch, CPU socket lever protector, Pre-mount I/O shield, BIOS FlashBack, Clr CMOS button and FlexKey (Reset, Aura on/off, Direct key).
Industry-leading Gaming Audio: High fidelity audio with ALC4080 with Savitech SV3H712 amplifier, along with DTS Sound Unbound and Sonic Studio III .
New ROG Strix Aesthetics: New ID design,ASUS-exclusive Aura Sync RGB lighting, including RGB headers and Gen 2 addressable headers.

Multi Connection - Up to 6 sets of Addressable RGB (3-pin) headers and PWM headers to meet your needs of connecting more devices.
Built-in Magnet Design - This compact HUB easily fits inside your case. It can attach to any metallic surface with built-in magnets.
Small and Convenient - It will save your space effectively and make the cable management easier, and make the inside case neat and tidy.
SATA Power - Even with full loaded, it still can maintain stable output.