Best Male To Male Fittings

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
Check Stock

Brass Bushing 1 Male x 3/4 Female Threaded Brass Reducer Bushing Lead-Free Pipe Fittings 1inch x 0.75 inch

  • ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
  • DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..
Check Stock

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
  • Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock

Brass Pipe Fitting Brass Bushing 1 Male x 3/4 Female Hex Bushing Reducer Threaded Brass Reducer Bushing Pipe Fittings 1inch x 0.75 inch

  • ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
  • DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..
Check Stock