Best Male Elbow Fittings

CNAODUN 10 Pcs Push-to-Connect Fittings 3/8 Inch Tube OD x 1/4 Inch NPT Thread Pneumatic Male Elbow Quick Connect Air line fittings…

  • ♥【What You Get】3/8" Od x 1/4" NPT Thread Push to Connect Fittings,10pcs in total.Body Style: Male Elbow.
  • ♥【High Quality】These air fittings are made of high quality plastic and copper ，are widely used for automatic industry, workshop equipment, auto repair ,decoration spray paint, woodworking, dental equipment, etc..
  • ♥【Working Parameters】Working Pressure:0～145psi.
  • ♥【Wide Range of Applicable Tubes】These fittings can be used for a wide range of pipes, and can be used for PU / PA / PE / PVC pipes..
  • ♥【Easy Application】Plug-in design, easy installation, clear threads, strong sealing..
Check Stock

Eaton Aeroquip 2062-8-6S Steel Flared Tube Fitting, 90 Degree Elbow, 9/16\ Male JIC x 3/4\ O-Ring Boss Male

  • 90-degree flared tube fitting elbow for connecting tubes at a 90-degree angle.
  • Male 3/4-16 SAE O-ring threads on one end and male 9/16-18 JIC threads on the other for use with 3/8" OD tubes.
  • Zinc-plated steel for strength, durability, and resistance to corrosion.
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different....
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

2 Pack - 316 Stainless Steel 1/4 NPT Female to 1/4 NPT Female Straight Hex Coupler/Coupling for Air, Liquid or Hydraulic Fitting - Industrial Air Tool Hose 1/4 Inch Coupling

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Fitting has a JIC flared male connector on one end and an NPTF male connector on the other.
  • Made of forged steel for weldability, rust resistance, and durability.
  • Operating temperature ranges from -63 to 400 degrees F.
  • Meets SAE standard J514 for quality assurance.
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

12FT Quick-Connect RV Propane Hose with 1/4 Safety Shutoff Valve and 1/4 Male Full Flow Plug Low Pressure Quick Disconnect Propane Hose with Elbow Adapter for 17 and 22 Blackstone Griddles

  • 【 Cost-Effective 】Product contains: 12FT Quick-Connect RV Propane Hose with 1/4" Safety Shutoff Valve and 1/4" Male Full Flow Plug, Low Pressure....
  • 【 Perfect Length 】 The 12FT Male/Female Quick-Connect RV Propane Extension Hose Compatible with Blackstone 17"/22" Griddles can be put where you....
  • 【 Applications 】The 12 Feet propane extension hose with 1/4 quick connect Shutoff valve and 1/4 quick connect full-flow male plug & Low Pressure....
  • 【 Premium Material 】The 1/4 inch Shutoff Valve and 1/4" Male Full Flow Plug,Elbow Adapter Fitting are made of 100% Solid Brass Fittings,The 12feet....
  • 【 Quality Commitment 】100% Full refund. If you don’t like our product or they are not what you want, please don’t rush to leave a comment,....
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock