Best Magnetic Driven Pump

Ace Pumps FMC-150F-HYD-206 Hydraulic Driven Centrifugal Pump, Flanged, for Open Center Systems Up to 16 GPM (60.6 LPM), 1-1/2" x 1-1/4"

  • MOUNTING VERSATILITY: The location of the pump is not tied to the PTO or engine drive shaft.
  • the pump can be mounted in a variety of locations to suit application requirements.
  • Customized Performance: A hydraulic driven pump can produce higher pressures than PTO or belt driven pumps.
  • EASY MAINTENANCE: On a hydraulic driven pump there are no belts to align or break. Separate pump and hydraulic motor shafts simplify repair and replacement.
  • All pumps are equipped with easily replaceable Viton mechanical seals.
  • They can hold constant pressure at varying engine speeds on closed center hydraulic systems.
Check Stock

Go, Flush, Wash and Dry

  • Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
  • Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
  • Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
  • One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..
Check Stock

Jabsco Lite Flush Compact 12 Volt Marine Electric Toilet with Panel Control

  • Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
  • Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
  • Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
  • One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Corsair iCUE H60i RGB PRO XT 120mm Radiator Single 120mm PWM Fan Software Control Liquid CPU Cooler

  • Improve your CPU performance with liquid cooling driven by a 120mm CORSAIR ML Series magnetic levitation fan, delivering powerful PWM-controlled....
  • Fits in nearly any PC build with a 120mm radiator delivering high cooling surface area and performance..
  • 16 Individually addressable RGB LEDs light up the pump head to produce stunning, customizable lighting effects to match your build..
  • Zero RPM cooling profiles in CORSAIR iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise..
  • CORSAIR iCUE software allows you to control and synchronize your cooler’s RGB lighting with all iCUE compatible devices, monitor CPU and coolant....
Check Stock

FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2"NPT thread Home Brew

  • 【Solid Magnetic Pump】 : Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation industrial/ home brew equipment. Great heat resistant up to 120℃/ 248℉..
  • 【Safely Transfer Liquid】 : Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to attach this magnetic pump, the propeller will magnetically circulates liquids for you. Please note: Moving giant vessel with hot wort yourself is not safe..
  • 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support..
  • Perfect for transferring and circulation..
  • 【Quiet and Efficient】 : The pump’s main shaft is separated from the impeller, which has damping and anti-Vibration function, aim to reducing the influence of motor vibration on the pump. Realized a high efficiency smooth running, and excellent quiet circulation..
  • 【Easy to Use】 : Prime by running liquid through the pump prior to turning it on.
  •  The liquid travels from the bottom of the valv....
Check Stock

Airtex AW4129 Engine Water Pump

  • This pump is used on accessory belt driven applications.
  • All gaskets or seals necessary for installation are supplied with pump.
  • Durable housing features precisely-machined mounting surfaces for proper sealing.
  • The latest impeller upgrades engineered for maximum coolant flow.
  • Read and follow all enclosed instructions to maximize pump life and validate warranty.
Check Stock

OTC 1834 25-Ton Capacity Shop Press with Air-Driven Hydraulic Pump

  • OTC's tough, economical, 25-ton capacity press features heavy steel construction with a durable powder coat finish and is ideal for pressing rear axle bearings, piston pins, and much more.
  • Large 30 inch x 46 inch work area under ram makes positioning of even bulky work easy.
  • Pneumatically driven hydraulic pump with simple foot operation keeps both hands free.
  • press bed is raised or lowered with a hand crank, allowing one-person set-up and operation.
  • Complete with No. 4020 Air-Driven Hydraulic Pump, No. 9652 Gauge, No. 24815 Tee, No. 9768 Hose, No. 51426 Hydraulic Ram with 6-1/4 inch stroke.
  • Unit stands 69-1/2 inches tall, 40-1/2 inches wide, and 28 inches deep.
  • frame extension holes are on 4 inch centers.
  • backed by OTC's Lifetime Marathon Warranty.
Check Stock