Best Machine Bolt Kit

TIME-SERT 3/8-16 Starter Bolt Thread Repair kit P/n 1535

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

SuperATV 4500 lb Winch for UTV/ATV | Complete Black Ops Winch Kit | Waterproof Seals and Solenoid | 1.3 HP Motor | 166:1 Gear Ratio

  • 【 Fits】Fits most bumpers or winch mounts with a 3.0" x 6.6" (76 x 168mm) mounting bolt pattern | Please Note : Requires machine-specific mounting plate or winch ready bumper (sold separately).
  • 【4500 LB Winch】Our SuperATV Winch is ready to make sure you're not stranded on the trail! | Powerful permanent magnet DC 12V 1.3 HP motor | 4500 lb. rated line pull synthetic 50' rope | 166:1 gear ratio | Winch dimensions (LxWxH): 14.49" x 4.60” x 4.37" | Automatic braking applied to the drum when motor is stopped or a load is attached.
  • 【Kit Includes】4500 lb. Black Ops Winch, 50' synthetic rope, wired dash rocker switch, aluminum hawse fairlead-6.0" (152.4 mm), fairlead support bracket, winch hook kit, hook pull strap, rope stopper, heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters).
  • 【Synthetic Rope vs. Steel Cable】Synthetic rope is flexible and it won’t shred your hands from frayed steel wire. It also won’t kink or rust—synthetic ropes are built for the mud and muck you find on the trail where steel cable is no....
Check Stock

502pc Motherboard Standoffs Screw Kit | Basic Computer Screws Set for HDD Hard Drive, Case, Fan, Power Card, Graphics, Chassis, CD-ROM, ATX Case | for DIY & Repair

  • {Metric & Imperial Sized Standoffs} Bolt Dropper’s kit has both metric and imperial standoffs offering a 99% fit in all types of mother board installations. Other kits don’t include an imperial size standoff which is necessary in many installations. No need to buy multiple kits to try and find the right size fastener with Bolt Dropper’s..
  • {502 Piece Kit} The Bolt Dropper PC Screw Kit contains more of the most used screws, nuts, washers, and chassis hand twist screws than others. This way you don’t run out during your build or repair. Other kits contain only a few chassis screws for your case, but Bolt Dropper contains more than double of the next leading brand. The 530-piece kit not only contains more quantity of each but also contains a larger variety & color of fasteners to help you find the right fastener for the right job..
  • {High Quality Screws} High quality screws with deep cut drives prevent stripping and snapping as well as ensuring a secure fit. When you’re constantly upgrading and removing parts, a screw that doesn’t strip is essential. Bolt Dropper’s precision-made fasteners add a layer of confidence knowing you can add and remove them time and time again without worry of ever stripping a head or snapping a screw..
Check Stock

Hard Case Compatible with Halo Bolt Air 58830 Mwh/for ACDC Max 55500 mWh/for Air+ Portable Emergency Power Kit, Car Jump Starter Holder Bag for AC Inverter, Air Nozzles and Accessories-Bag Only

  • Wide Compatibility Car Jump Starter Case: Battery pack charger organizer holder is fit for Halo Bolt Air 58830 Mwh/ for ACDC Max 55500 mWh/ for Air+ Portable Emergency Power Kit. For halo bolt air case external size: 10*8.4*2.6inches, internal size: 9.6*8*1.6inches. Note: For sale is car charger power bank holder, for halo bolt air 58830 Mwh and accessories are not included..
  • Case for Halo Bolt Air Car Charger Thoughtful Design: Portable battery charger bag has a detachable divider inside, allowing you to store the charging cable, adapter and for Halo Bolt ACDC max 55500 mWh emergency power kit separately and avoid friction and collision. With zipper mesh pocket, for halo battery charger jump starter organizer can hold tire pump, 4 interchangeable air nozzles and extra accessory kit, preventing loss and forgetfulness..
  • High-Quality Material for Power Bank Emergency Starter Box: Made of durable EVA material, for halo bolt air carrying case is shock-proof, drop-proof and easy to clean. Car emergency kit organizer protects for halo car air pump charger from scratches and dust, absorbs external impact effectively if dropped. Power banks storage case ensures for halo bolt air car jump starter & air compressor safety, and makes it easy to use..
Check Stock

YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer

  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for gas powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

PEGGAS 7/8\ Shaft Vertical Pressure Washer Pump - 3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653045, 308653093, 308653052, 308653078, GCV190, and more

  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with vertical engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

VITCIK Full Fairings Bolt Screw Kits for Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012 Motorcycle Fastener CNC Aluminium Clips (Red & Silver)

  • FASTER SHIPPING: We will ship them within 24 hours. Normally it will take 3-10 business days for delivery (usually 5 days according to the delivery record).
  • Fasteners Bolt Kit Screws Fit For: Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012..
  • Complete Fairing Bolt Kit Includes: Bolt Socket Screw(20+20+20+6+6 pieces) + Truss Screw(10+10 pieces) + Retainer(4+4+2 pieces) + Washer(60 pieces) + Speed Nut(10 pieces) + Lock Nut(40+20 pieces) + LIFETIME friendly customer service..
  • Total quantity of parts included in this kit is 232 pieces..
  • Full fairing bolt kit which contains all the hardware that is needed for the replacement of windscreen and main fairing pieces (front nose fairing, left/right fairing, front tire fender, tail fairing, v-panels, etc), whether the original or aftermarket ones..
Check Stock

OEM Technologies 90029 Replacement Pressure Washer Pump Kit, 3400 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines

  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt pattern, hardware, and standard connections make it a great fit for many brands and models of power washers.
Check Stock

Dorman 03114 Front Exhaust Flange Hardware Compatible with Select Subaru Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock