Best M3 m10 Tap Set

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..

Check Stock

X-DREE Replacement Brass Tone 14mmx10mmx5mm Self Tapping Threaded Inserts 2Pcs(Reemplazo de tono de latón 14mmx10mmx5mm Inserciones roscadas autorroscantes 2 piezas

[50Pcs M3 M8 Self Tapping Thread Inserts Set]: There are 50Pcs stainless steel inner threads, including M3, M5, M6, M7, M8, M9, M10 M11 and M12, could meet your different needs in your repair work.
[Self Tapping Thread Inserts]: These thread inserts have the self tapping capability, which is easy to use. You can directly use the installation tool to screw it into a specific hole without pre tapping.
[Organzier Box for Easy Storage & Use]: Our screw repair sleeve assortment Kit is equipped with a plastic storage box, which is small in size and easy to carry. There are small compartments in the box, which allows you to sort and store thread reinforce repair tools in a more organized way. And it also makes it easier and faster for you to identify and access the screws.
[Sturdy Stainless Steel]: Our screw sleeve Assortment kit is made of stainless steel, which has good rust and corrosion resistance. The high quality materials make these thread inserts durable and not easy to deform, break or slip.
[Wide Application]: The stainless steel inner thread set could be us....

Check Stock

Hilitchi 140-Pcs M3 M4 M5 M6 M8 M10 M12 Acorn Dome Cap Head Hex Nuts Assortment Kit, 304Stainless Steel

♛ High Quality Acorn Dome Cap Head Hex Nuts Assortment Kit.
♛ Made of 304 Stainless Steel, Improve the Ability of Corrosion Resistance and Anti Resistance, Strong and Durable. Thread pictch:M3(0.5) M4(0.7) M5(0.8) M6(1) M8(1.25) M10(1.5) M12(1.75).
♛ Set includes 7 most-used sizes: M3 (35pcs), M4(35pcs), M5(25pcs), M6(25pcs), M8(10pcs), M10(5pcs), M12(5pcs).
♛ Package Quantity: 140-Piece, All of screws will be packed in a sturdy plastic box, can be use for a storage box.
♛ Acorn cap nut is a hex with an enclosed dome and it is partially internally threaded, can play a good role in decoration and to prevent being threaded scrape.

Check Stock

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..

Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

...tting performance of the drill, is more wear-resistant and prolongs the service life..
13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations..

Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.

Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..

Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).

Check Stock

Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool

Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12.
Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading..
Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap..
Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life..
High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material).

Check Stock