Best M14 m18 Left handed Tap And Die

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

...s and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for thre....

Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.

Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.

Check Stock

KIMISS 2Pcs Spark Plug Re-thread Tap,Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5 Black

Carbon steel material ----------- The spark plug threaded joint is made of high quality carbon steel material, which is scratch-resistant,....
Product function ----------- The spark plug thread insertion tap repair tool is used to repair the damaged spark plug installation thread, is a good....
Product size ------- The small faucet size of the spark plug threaded joint: M10 * 1.0 / M12 * 1.25, large faucet size: M14 * 1.5 / M18 * 1.5, easy to....
Professional production -------- The spark plug threaded joint is professionally produced, meets the standard specifications, stable performance, high....
Note--------- Please refer to the description for detailed product parameters..

Check Stock

BTSHUB Engine Compression Tester, 8PCS Engine Cylinder Pressure Gauge for Petrol Gas Engine Automotive Tool Gauge for Car & Truck

【APPLICABLE】 Compact with easy to read gauge makes it an ideal accessory for the mechanically minded. Quickly and accurately check compression with this Automotive Compression Tester Kit..
【APPLICATION】Compatible for use on petrol engines motorcycles and automotive vehicles. Diagnose and repair problems all in the convenience of your own garage..
【PACKAGE INCLUDING】Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm. Pressure gauge diameter: 75mm, four thread size: M10 x 1.0mm, M12 x 1.25mm, M14 x 1.25mm, M18 x 1.5mm. M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
【High Quality】This cylinder compression tester kit is made of durable material for long-lasting use. Checing compression of petrol engines quickly and accurately. It is a professional tool to test the compression in gasoline engine..
【EASY STORAGE】Kit comes in a specially designed molded case for easy and safe storage. Included are a variety of thread sizes to suit different nozzle attachments. All products are 100% brand new..

Check Stock

Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool

This tap and die set is made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
86 piece tungsten steel set comes in an organized, rugged plastic storage case.
Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.

Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
Ratcheting t wrench works with GEARWRENCH pass thru socket system.
Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.

Check Stock

HHIP 1017-0007 7 Piece M6-M20 Hexagon Rethreading Die Set

7 piece set includes one each of an M6 X 1.00, M8 X 1.25, M10 X 1.50, M12 X 1.75, M14 X 2.00, M16 X 2.00 and M20 X 2.50 die.

Check Stock