Best Ls Contactor

2 Pole AC Contactor, Generic Heavy Duty 40Amp 24V Coil Air Conditioner Contactor Condenser Compressor Contactor, Definite Purpose Contactor

  • PARAMETER: This AC contactor is 2 Pole, FLA 40 Amp rating, 24V coil, Normally Open (N.O.) Contact. The contactor meets specifications for devices up to 600 VAC..
  • HIGH-QUALITY MATERIALS: Heavy lug terminals and push-ons for high voltage connections. Silver alloy contacts for better conductivity. High-precision silicon steel core, pure copper coil and flame-retardant shell, this ac contactor is durable to serve several years. UL listed: E499854.
  • SAFE TO USE: Enclosed contacts and encapsulated 24 volt coil, which keep dust and dirt away, avoid arcing and sparks. You can use it safely and securely..
  • WIDE APPLICATION: Our definite purpose contactor can be used to replace most 2-pole contactors (rated current less than 40Amp) in 99 percent of household appliances and systems, such as HVAC, motors, heating and refrigeration systems. It can also replace Carrier, Bryant, Payne, Goodman, Amana, Janitrol, Rheem, Ruud, Weatherking, Lennox, Trane, American Standard and other brands. Good companions for your home life..
  • 2-YEAR WARRANTY: It is very easy to install, just take a few minutes to replace one. You can enjoy our first-class service with full refund for no reason, 2-year and 24-hour customer service..
Check Stock

12V Winch Rocker Thumb Switch Control Line with Mounting Handlebar for ATV UTV Handlebar Control Line Kit

  • ①Winch Rocker Switch Control Line for ATV/UTV.
  • ②Handle Bar mounted Mini Rocker Switch with Standard Bullet Connectors for Use with 1,500lb-6,000lb ATV/UTV/SxS Winches.
  • ③12V Industry ATV/UTV contactor/solenoid/relay requires auxiliary power and two control wires. Splicing of wires may be required depending on the connectors found on the customer's current contactor/solenoid.
  • ④Low Temperature Resistance of PVC Casing and the Line of Control.
  • Waterproof/weatherproof switch works with any standard.
  • ⑤●Wires into the Contactor/Solenoid, Including Rocker Switch, Wiring, Mounting Hardware.
  • ●Control Wire Length: Approximately 10ft / 3m.
Check Stock

LNKA Foot Control Pedal & Cord J00360051 Compatible with Brother LS2125i 1034D Serger,1034DX Serger,1034DAV Serger,10443,1134D,1134DW

  • J00360051 Foot Controller Pedal with Cord for Brother Serger Models:1034D Serger, 1034DX Serger, 1034DAV Serger.Brother 10443, 1134D, 1134DW, 150 Campus, 1634D, 1681, 1781, 2034D, 2340CV Serger, 3234DT, 268, 3034D, 3234D, 350, 360, 4234D, 4234DT Serger, 451, 461, 523N, 5234PRW Serger, 524N, 525N, 526, 526D, 546, 546D, 626D, 634D, 640D, 661, 681, 7029, 730DE, 741, 751, 760DE, 834DP, 920D, 925D, 929D, 934D, 935D, 1781 B373, BM2600, BM2700, BM2700AS, BM2800, BM2800CT, BM2800FG, BM3500.
  • For Brother Sewing Machine: BM3600, BM3700, BM3700CT, BM3700FG, BM3850, BM3850CT, BM3850FG, Comfort 10, Comfort 12, Comfort 15, Comfort 25A, Comfort 35A, CV3440, CV3550, DZ1234 Serger, DZ1500F, Galaxy 8015, GS2700, GS2786K Hello Kitty, GS3700, GS3710, GS3740C, Hanami 27S, Hanami 37S, Hanami37S, HQ17, HQ27, HQ33,J17, JS2130, JS23, JX1710, JX2517, L15, L25, L30, L35, L40, LS1217, LS1520, LS17, LS1717, LS1717B, LS1717P, LS1817, LS2000, LS2020, LS2020P, LS2125, LS2125B, LS2125i.
  • For Brother Sewing Machine:, LS2129, LS2130, LS2135, LS2150, LS2160, LS2220,LS2250PRW, LS2300PRW, LS2320, LS2350, LS2400, LS25, LS2720, LS2725, LS2820, LS2825, LS2920, LS30, LS3125, LS35, LS590, LX1700, LX2375, LX2500, LX2763, LX3125, LX3125E, LX3817A, LX3850, NX600, PC-15, PL1050, PS1000, PS1200, PS125....
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and t....
Check Stock

AKB73615316 Replace Remote Control fit for LG Plasma TV 32LS5600 37LS5600 42LS5600 42PA4900 47LS5600 50PA4500 55LS5600 55LS5650 60PA550C 55LS4600 LED LCD HDTV

  • AIDITIYMI AKB73615316 Replacement Remote Control fits for LG LED LCD Plasma TV HDTV.
  • Compatible with LG TV model 32LS5600 32LS5600UC 32LS5600-UC 37LS5600 37LS5600UC 37LS5600-UC 42LS5600 42LS5600UC 42LS5600-UC 42LS5650 42LS5650UD....
  • 42PA4500 42PA450C 42PA4900 42PA4900UD 42PA4900-UD 42PA4900-UF 47LS4600 47LS460055LS4600 47LS4600UA 47LS4600-UA 47LS5600 47LS5600UC.
  • 47LS5600-UC 47LS5650 47LS5650UD 47LS5650-UD 50PA4500 50PA4500UF 50PA4500-UF 50PA4500UM 50PA4500-UM 50PA450C 50PA450C-UF 50PA450CUM.
  • No programming or pairing needed, put into new batteries then it works.
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....
Check Stock

MaySpare 250A 12V Winch Solenoid Relay Contactor Winch Rocker Thumb Switch with Mounting Brackets Terminal Caps and Handle Bar Control Switch for ATV UTV 1500lb-5000lb

  • 【Technical details & Applications】Voltage: 12V.
  • / For ATV Winch Solenoid Relay Contactor Switch 12V 250....
  • 【Premium quality】Great Alternative to OEM,Heavy duty and Replacement Contactor for KFI Winch Kits.
  • It Functions As Reversing the Polarity On the....
  • 【Application】 - For ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb Application.
  • 【LIFETIME WARRANTY】100% high quality & oem Match, direct replacement.
  • Note: The Switch is a momentary center-off SPDT type. It is designed to handle intermittent current loads of 250 amps for up to 10 seconds, requiring....
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....
Check Stock

Replacement for Mars Double Pole / 2 Pole 40 Amp 240v Condenser Contactor Relay 91323

  • This is a Brand New Upgraded 2 Pole 40 Amp Condenser Contactor.
  • This is a "Heavy Duty" contactor rated at 40 Amps!.
Check Stock