Best Low emittance Adhesive

IR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)

Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..

IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
Comes with adhesive backing sticks directly onto different devices.
Overall length of Infrared Emitter Extender: 10 feet (3 meter).
Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.

Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Monolithic construction with built-in base-emitter shunt resistors.

High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
We have undergone rigorous testing and stable performance.

➤Works with all 38-56kHz IR remote control and devices with an IR input port..
➤Low current drive, low power consumption, long launch distance, small size installed..
➤Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
➤Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control ..

Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).