Best Low Profile Servo Board

AGFRC 36KG IP67 Waterproof Steering Servo High Torque Programmable Full Metal Gear Digital Brushless Servo with 25T Metal Servo Horn for 1/10 RC Models, Control Angle 180° (A80BHSW V2)

  • Programmable & High Torque - AGFRC A80BHSW high torque servo is programmable by the AGF-SPV2/3 servo programmer to change the torque, speed, angle, inversion, etc. The maximum torque of this steering servo for RC car is up to 36 kg/cm (500 oz/in) @8.4V and speed up to 0.071sec/60°@8.4V..
  • IP67 Waterproof Design - AGFRC RC steering servo motor uses high-precision production technology to improve product tightness. With IP67 waterproof design, when you cross the mountains and pass the charming stream, fully magnetic waterproof IP67 grade can let your model play with the river..
  • High Quality & Performance - Standard waterproof high torque servo equipped with full patent reinforced steel gear, full metal case, three ball bearings, and magnetic angular position Sensor which is low power consumption and can instantaneous angle sensing..
  • High Precision & Application - Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. This brushless full metal gear servo is with a standard size, dimension: 40*20*37.5mm, ideal for 1/10 buggy, monster truck, RC car, crawler, climbing car, boat, airplane, helicopter, robot, etc..
  • Satisfied Customer Service - Please read the detail description of this brushless high speed HV servo motor first, if any ideas ....
Check Stock

VGEBY RC Servo Full Metal Gear 9G All Metal Servo for WPL B1/B16/B24/B36/C1/C24/C34/JJRC Q60/Q61/Q65/MN 90/99 RC Car

  • 【Excellent performance】: RC servo not only has high efficiency, low noise, low power consumption, but also high sensitivity and responsiveness..
  • 【High precision:】 The high-quality servo torque is large and the response is fast and accurate. It can achieve the best control state when used with the RC model. Can provide you with different experiences and fun..
  • 【Design】: RC Mini Digital Servo is designed for 3D F3P aircraft. Perfect accessory for RC enthusiast..
  • 【Easy to install】: small size, easy to install and disassemble, is an excellent choice that can better upgrade the performance of your model toys.
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

Zoty 15x21x4mm Bearing 6702-2RS Rubber Sealed Hobby RC Vehicle Servo Bearings Pack of 10pcs

  • ABEC-3 Grade Hobby RC Vehicle Servo Bearings.
Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

  • ✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
  • 0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
  • ✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
  • ✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
  • ✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
  • Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
  • ✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.
Check Stock

FOSA EMAX ES9051 4.3g Digital Micro Servo Plastic Gear 0.8kg Torque Servo RC Parts for 3D F3P RC Airplane, for FUT/JR Plug

  • Micro servo motor is designed for 3D F3P airplane. Easy to install and disassemble.
  • Digital micro servo is fast and precise to react, which can achieve the best control state when used with RC models.
  • Mini gear servo is high efficiency, low noise and low power consumption during operation.
  • Metal gear rc servo Gear is made of high-quality materials, very wear-resistant, light weight, can not be easily damaged.
  • Plastic gear is shock resistant and durable, practical, stable performance.
Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

  • The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
  • Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
  • And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
  • The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
  • - Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).
Check Stock

Mad Catz The Authentic R.A.T. AIR Wireless Power Gaming Mouse with Charging Pad - Black

  • ...ow-friction hard side designed to fit a variety of playstyles.
  • 16” diagonal of available playing space on activation board.
  • dimensions: 14.06 in x 11.18 in x .24 in.
  • Multi-button functionality for maximum precision and control: Scroll wheel, Left click, Right click, DPI button, Forward, Backward, Precision button, Profile button, Side scroll wheel - customize within software for extra functionality.
  • Precision button instantly increases or decreases sensitivity - ideal for in-game sniping.
  • F.L.U.X. software lets you customize your settings - create unlimited user profiles, program buttons, customize lighting and more.
  • works with Windows Operating Systems only, available for download..
  • Store your favorite 4 user profiles on mouse using on-board memory - quickly switch using Profile button.
  • Industry-leading OMRON switches - 50 million click lifetime.
  • Adjustable palm rest - side button releases palm piece for customizable comfort.
  • extended wing thumb rest - ergonomically designed to be comfortable even through hours of game play.
  • Low friction PTFE glide feet provide smooth, fast movement without dragging.
  • chameleon lighting strip - lighting strip illuminates activation board and is configurable using inclu....
Check Stock