Best Lontan Drawer Slides

LONTAN Undermount Drawer Slides 22 inch Soft Close Drawer Slides 1 Pair Only for Sidewalls,Bottom Mount Full Extension Dresser Drawer Slides for Cabinet, Kitchen, 100 LB Capacity

  • SOFT CLOSE & FULL EXTENSION: LONTAN soft close undermount drawer slides equipped hydraulic damper which allows the slides achieve soft close effect. Smooth opening and closing, create a warm and quiet family environment for you.The fully extended opening allows access to the entire drawer..
  • MATERIAL & INSTALLLONTAN drawer slides are made of high quality galvanized, heavy-duty and durable, load-bearing capacity: 100 LB.It can serve you many years.We are equipped with detailed installation instructions, easy to install..
  • SAFE AND BEAUTIFUL:The concealed design of the slide rail makes the furniture look more beautiful and high-end, and the slide rail is placed at the bottom of the drawer to improve the safety of use..
  • MEASUREMENTS: Nominal slide length21.26inch540mm.
  • Load-bearing capacity: 100 LB. The detailed size can be seen in the picture introduction on the details page.Please choose the right size before you purchase our soft close undermount drawer slides..
  • EXCELLENT AFTER-SALE SERVICE: We focus on quality and after-service. If you find any quality problem on our drawer slides, please feel free to contact us, we promise solve it until you are satisfied. Replacements or other solutions would be provided for you. No Risk..
Check Stock

5 Pairs Rear Mounting Brackets for Drawer Slide - LONTAN B4502 Cabinet Drawer Bracket Drawer Track Guide Kitchen Replacement Parts for 1.77 inch 45mm Width Furniture Gildes

  • Material: Work harden cold rolled steel with zinc plated finish for face frame construction..
  • Application: If you have face frames on your cabinets, then you need a face frame kit to support the rail.
  • Package Included: 5 pairs of Rear/Side Mounting Brackets and mounting screws.
  • Suitable for the width of 45mm(1.77 inch) drawer slides.
  • Our LONTAN brackets can extend the original length of the slides. The extension length can reach 2.75in (70mm).
Check Stock

Drawer Slide Jig (New Version)

  • The Universal Drawer Slide Jig is for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides!.
  • The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer..
  • Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback..
  • The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them..
  • The Drawer Slide Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you’ll use, a clamp, and the Drawer Slide Jig, and you’re set to install drawer slides just like the pros. Whether you’re installing one drawer or dozens, the Drawer Slide Jig provides f....
Check Stock

16inch Soft Self Close Drawer Slides 6 Pairs (12pcs) Full Extension Ball Bearing Drawer Slides 3 fold Full Stretch Side Mount Drawer Slides 100 LB Capacity Drawer Slide 16" Silver

  • [6 pairs Soft Close Drawer Slides]:You will get 6 pairs soft self close drawer slides ,16 inch.And each drawer slides match with 12pcs screws.HLC self close drawer slides designed with ultra smooth soft-close function. Continuous bearings ensure smooth and quiet performance that offer less noise at closing and opening creating a silent life environment for your family..
  • [High-Grade Material]:All of the drawer slides which made by HLC are made from high-grade cold rolled steel that is electrom zinc plated.Rust resistant for your lifetime use.Side mounted Steel ball-bearing action.100 LB capacity..
  • [Guide for Choosing Size of Drawer Slides]:Side installation.To determine which size of slides are good for your drawer, please measure the length of the drawer without the frame board. And if the length is not even, please choose 1 inch shorter. The length of slides can't be longer than the cabinet case depth. Face frame cabinets will require a rear mounting bracket, whereas for faceless cabinets the slides are mounted directly on the side..
  • [3-Fold full extension & Detachable]:There is a plastic buckle on the back o....
Check Stock

VEVOR Drawer Slides with Lock, 1 Pair 30 inch, Heavy-Duty Industrial Steel up to 500 lbs Capacity, 3-Fold Full Extension, Ball Bearing Lock-in & Lock-Out, Side Mount

  • Three-Section Drawer Slides: You can get 1 pair of drawer slides: 30"/ 76.2 cm in length, 3"/ 7.6 cm in width, 0.75"/ 1.9 cm in thickness. With three-fold full extension design, allowing for the entire drawer to be reached. A great helper to maximally utilize your drawer's space(fully closed length: 30", fully extended length: 60"/ 152.4 cm)..
  • Sturdy Steel & 500 lbs Bearing: Constructed with 0.75"/ 19 mm thickness cold-rolled steel (CRS), the heavy-duty drawer slides are up to 500 lbs/ 225 kg load capacity. Secure and rugged enough to support heavy storage without deformation. The zinc-plated surface stays the extension drawer slide be rust-proof and abrasion-proof for your lifetime use. The slides can be applied to goods shelves, cabinets, the industrial drawers, RVs, trucks, vending machines, etc..
  • Softly & Quietly Slide with Lock: Lock-in and lock-out designs are easy to control and secure to fixation. It features that the drawer cannot be pulled too far out and fall off the tracks. The drawer slide can be locked only in a fully closed or fully expanded state by pressing the yellow handle. A double row of ball-bearing action provides a smooth slide performance at closing and opening the drawer. The nylon buffer design on the middle-section slid....
Check Stock

Drawer, Wood - Wooden Desk Drawer: Slide Closed, Desks and Desk Drawers

  • 【Package Included】: You will receive 6 pieces wood drawer slides, and measuring 39.9cm (15.7inch) long, 4.7cm (1.86inch)wide and 2cm (0.84inch) high..
  • 【Beech Wood Material】: The wood drawer glide is made of hardwood beech material, which is durable and sturdy..
  • 【Easy to Use】:  Wood drawer slides bottom mount surfaces are aligned flat. Careful design of the fixing point with the drawer, it is smooth and will not get stuck during use..
  • 【Exquisite Workmanship】: After the wooden drawer slides are installed, center mount drawer slides are stable and firm, not easy to loosen, bears large tensile force, and will not easily damage the drawer..
  • 【Suitable for DIY】: The exterior of the drawer tracks is a log color, you can color wooden drawer slides to adapt to your environment..
Check Stock

ROCKLER 865042 Drawer Slide Jig, Blue

  • Bundle Includes: Kreg Drawer Slide Jig and Concealed Hinge Jig.
  • Takes the Guesswork Out of the Process: Whether you're updating cabinets or you're building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won't operate well. The Drawer Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
  • Smooth Positioning: The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you'll know that your slides are positioned correctly, so your drawers will operate smoothly.
  • Incudes Two Brackets: The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet - one on each cabinet side - and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to pro....
Check Stock

Yision 2 Pair Full Extension Drawer Slides Black,10 Inch Soft Close Full Extension Ball Bearing Side Mount Heavy Duty Drawer Slides,100 lb Load Capacity Runner

  • 10INCH SOFT CLOSE DRAWER SLIDES: Made of high grade cold rolled steel, ensure quality and longevity. Side mounted Steel ball-bearing action, Capacity 100 Lbs..
  • SMOOTH AND QUIET: With their dual spring design and triple ball bearings, these full extension drawer slides give you a smooth pull-out followed by a soft, quiet close every time. steel ball bearing action slides that are ensure smooth and quiet performance..
  • DRAWER SLIDES SIZE: 25cm x 4.5cm/9.84inch x 1.77inch (L x W), thickness: 1.3cm /0.51inch.
  • Heavy duty drawer slides for home drawer DIY decorated.PACKAGE INCLUDED: 2 pairs 10 inch soft chose drawer slide, with 12pcs mounting screws included..
  • DRAWER SLIDES INSTALL: These triple ball bearing drawer slides are side mount and will fit most cabinet drawers. We include mounting screws and all the info you're ll need for a trouble-free installation. Side mounted, non handed design, positive stop..
  • APPLICATION WIDE: This product has various applications in kitchens, office, store fixture, institutional and residential casework.Heavy duty drawer slides are ideal for cabinetry, RV, trunk, toolbox and big storage drawers..
Check Stock

Sublime Design | Pull Out Tray | Baltic Birch Drawer for Kitchen Cabinets | Slide Out Shelves | Roll Out Cabinet Organizer (21\ WIDE)

  • MEASURE YOU OPENING: Fits a 21" wide cabinet opening. Follow the measurement guide picture for how to measure. Drawer slides are adjustable to fit a cabinet depth of 21 3/4" to 23 1/2". If your cabinet (probably bathroom vanity) is less than 21 3/4" deep message us so we can send you shorter drawer slides..
  • NO ASSEMBLY REQUIRED: Drawer comes fully assembled, only needs installation into cabinet. MADE IN USA by a Veteran Owned Business..
  • MATERIAL: Made from Baltic Birch Plywood with Dovetail joints and a natural clear coat finish. Pull out tray comes full assembled, with drawer slides installed on pull out tray..
  • WHATS INCLUDED: Pull out drawer, 1 set of full extension 80 lb drawer slides, rear mounting bracket set, mounting screws. Note: Drawer slides are NOT soft close..
  • APPLICATIONS: Pull out tray is ideal for Pantries, Base Cabinets, Under Sinks, Hard to Reach Areas of Cabinets. Bathroom vanity cabinets require 3" shorter drawer slides. Notify us if you are installing in bathroom vanity cabinet and we will send you shorter cabinet slides..
Check Stock