Best Lm 4uu Bearing

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

uxcell LM16UU Round Flange Linear Ball Bearings, 16mm Bore Dia, 28mm OD, 37mm Length(Pack of 2)

  • Model: LM16UU (Nominal Shaft Diamter (dr): 16mm, Outer Diameter (D): 28mm, Total Length (L): 37mm).
  • Round Flange Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Aexit LM8UU 8mmx15mmx24mm Bearings & Bit-Repair Parts Linear Motion Bushing Ball Bearing Silver Bearings Tone 10pcs

  • Package Content: 10pcs x Linear Ball Bearing.
Check Stock

Sydien 4Pcs SCS12UU Linear Motion Ball Bearing CNC Slide Blocks 12mm Inner Diameter

  • [SIZE] - Model: LM6UU, 6x12x19mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 206N, Dynamic Load Capacity (Cr): 265N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

QWORK 2Pcs SCS12LUU Aluminum Linear Motion Ball Bearing Slide Unit Bushing, Type CNC Extra Long Linear Roller Bearing Slide Block, 12mm Bore Dia

  • Model: LM8UU (Nominal Shaft Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
  • Linear Motion Ball Bearing Bushing Sealed on Both Side.
  • Chromium Steel shell and bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

CNBTR Horizontal 8mm Dia Linear Motion Ball Bearing Slide Bushing &200mm Linear Shaft Optical Axis with Rod Rail Support Set

  • Model: LM8UU Bore Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 24mm).
  • It is generally used on 3D printers and CNC machines. These bearings have proven to be long lasting and provide precise low friction linear movement..
  • Used for the design of linear motion products it can cooperate with linear bearing to ensure excellent sports performance under high load or long stroke occasions..
  • Smooth moving, low friction, high rigidity and long life..
  • Bearing various parts of the size is standardized, interchangeable, no worry if replacement of worn.
Check Stock

Sinoblu 10pcs LM3UU 3mm Bore Linear Motion Ball Bearing 7mm Outer Diameter 10mm Length for CNC Machine 3D Printer

  • [SIZE] - Model: LM8UU, 8x15x24mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

uxcell LM8UU Extra Long Round Flange Linear Ball Bearings, 8mm Bore Dia, 15mm OD, 45mm Length(Pack of 2)

  • Model: LM8LUU Bore Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm).
  • It is generally used on 3D printers and CNC machines. These bearings have proven to be long lasting and provide precise low friction linear movement..
  • Used for the design of linear motion products it can cooperate with linear bearing to ensure excellent sports performance under high load or long stroke occasions..
  • Smooth moving, low friction, high rigidity and long life..
  • Bearing various parts of the size is standardized, interchangeable, no worry if replacement of worn.
Check Stock