Best Line Inputs

Rockville RPG2X12 Package PA System Mixer/Amp+12\ Speakers+Stands+Mics+Bluetooth

  • ...ts Peak, Molded plastic speaker cabinet for increased sound quality, Two way cabinet architecture, Horizontal / Vertical position for use as stage monitor or PA speaker, Impedance : 8 Ohm, Pole mountable.
  • Features of Mixer: 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity, 17 Inputs! , 2 Speaker outputs and line output to connect a subwoofer or more speakers, USB / SD Input, MP3 Playback, LCD Display, Bluetooth connectivity, 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers, 8 balanced XLR and ¼” microphone inputs, Tape/CD Line inputs, Master volume control, Bass, treble controls, and level controls on each channel.
  • Reverb effect level control on each channel, Digital delay effect with independent level control, Phantom power for condenser mics! , 5 Band graphic equalizer, Line Out for connection to external amplifier, Return input for connection of external effects processors, Record Out for taping, RF interference protection on all inputs, Aux Send Output : -10 dBv nominal, 1k ohms, Tape Rec Output : -10 dBv nominal, 1k ohms, Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms.
  • Features of Microphones: This package includes (2) of our famous....
Check Stock

BOSS Audio Systems R1002 Car Amplifier - 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range

  • POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly..
  • WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com.
Check Stock

482i

  • 2 channels of BBE for stereo or separate dual mono mixes.
  • +4dBu balanced line with 1/4" tip-ring-sleeve and XLR inputs and outputs.
  • Bypass switch for comparison of processed to unprocessed signal.
  • Hardwire Bypass Switching, +4dBu balanced line with 1/4" tip-ring-sleeve and XLR inputs and outputs, +23dBu headroom.
Check Stock

Behringer Europort PPA500BT 6-Channel Portable PA System with Bluetooth

  • 6-channel Ptable PA System with 2 Mic/Line Inputs.
Check Stock

Behringer Europort PPA2000BT 8-Channel Portable PA System with Bluetooth

  • 8-channel Ptable PA System with 4 Mic/Line Inputs.
Check Stock

Signia MiniReceiver Wax Guards 1 Pack Total of 8 Wax Guards

  • 6-channel Ptable PA System with 2 Mic/Line Inputs.
Check Stock

Samson S-zone 4-Input/4-Zone Stereo Mixer

  • On board Speaker and Headphone monitoring.
  • Euro block output connectors, Remote Volume Control.
Check Stock

(2) Rockville SPGN258 Dual 15 3000w 8-Ohm DJ PA Speakers+6000w Powered Mixer

  • ...put connections : Two 1/4" jacks and one speakon jack. Two 16 ft speaker cables (1/4 to ). Rubber feet protect the enclosures. Maximum SPL : 111dB. Input connections : Two 1/4" jacks in parallel. Powder-coated steel grill. 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity. 17 Inputs!. 2 Speaker outputs and line output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity.
  • 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors.
  • Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization : +/- 15 dB @ 5 kHz. Protection Circuit : Pow....
Check Stock

Emerson 24A34-5 Electric Heat Sequencer, 3 Switches

  • +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations..
  • Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity..
  • 3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms..
  • Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB..
  • 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker. . . )..
Check Stock