Best Leupold Scope Covers 40mm

Fixed Torque Drive 5NM Orange

ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds.
40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches.
EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds.
DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”.
INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.
LONGTERM USE: Always return to the lowest inch/pound setting after use.
GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.

Model #180621 - VX-3HD 4.5-14x40mm Riflescope with a Wind-Plex CDS-ZL reticle and a Burnt Bronze finish.
Wind-Plex Reticle - Expands on the Duplex reticle but provides hold points to compensate for crosswinds.
ZeroLock CDS-ZL (Custom Dial System) - Simplifies longer shots by eliminating the need for holdovers or ballistic calculations by using a dial that is customized to your gear.
Leupold's Elite Optical System - delivers unparalleled light transmission, glare reduction, and resolution for superior performance in any conditions.
Design, Machined and Assembled in the USA. 100% Waterproof, fogproof, shockproof, and backed by Leupold's legendary customer care.

Model #180617 - VX-3HD 3.5-10x40mm Riflescope with a Duplex CDS-ZL reticle and a Matte finish.
Duplex reticle - Defined by heavy posts, stands out against cover in low light, most popular reticle in the world.
ZeroLock CDS-ZL (Custom Dial System) - Simplifies longer shots by eliminating the need for holdovers or ballistic calculations by using a dial that is customized to your gear.
Leupold's Elite Optical System - delivers unparalleled light transmission, glare reduction, and resolution for superior performance in any conditions.
Design, Machined and Assembled in the USA. 100% Waterproof, fogproof, shockproof, and backed by Leupold's legendary customer care.

Model #180619 - VX-3HD 4.5-14x40mm Riflescope with a Duplex CDS-ZL reticle and a Matte finish.
Duplex reticle - Defined by heavy posts, stands out against cover in low light, most popular reticle in the world.
ZeroLock CDS-ZL (Custom Dial System) - Simplifies longer shots by eliminating the need for holdovers or ballistic calculations by using a dial that is customized to your gear.
Leupold's Elite Optical System - delivers unparalleled light transmission, glare reduction, and resolution for superior performance in any conditions.
Design, Machined and Assembled in the USA. 100% Waterproof, fogproof, shockproof, and backed by Leupold's legendary customer care.

Features proprietary Argon/Krypton gas blend, which nearly eliminates the effects of thermal shock, and reduces the diffusion of gases sealed inside your scope even more than Leupold's proven nitrogen technology already does.
The 30mm maintube offers incredible strength and allows for the greater range of windage and elevation adjustment.
Versatile magnification range offers a wide field of view at low power and precise target identification at high power.
Twilight Max Light Management System mazimizes usable light transmitted to your eye improving visibility in low-light conditions.
Guard-Ion rain shedding coating is extremely durable, scratch resistant, and sheds water, dirt, and fingerprints.

ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds.
40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches.
EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds.
DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”.
INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.

Rubberized flip-up rifle scope lens covers that conform tightly around your rifle scope tube, protecting your lenses from dust and abrasion.
Spring-loaded flip-up mechanism pops open effortlessly when needed and securely tightly when not in use.
Each set includes two Rubberized Flip-Up Lens Covers. This set include one eyepiece cover with the size 37-43mm/1.5-1.7in and one objective cover with the size 26-31mm/1.0-1.2in.
For optimum fit, carefully measure the OUTSIDE DIAMETER of both your rifle scope’s eyepiece and objective bell. Please note that this measurement is different than the diameter of your objective lens.
Available in a full range of sizes to fit any rifle scope. Eyepiece Cover available in 37-43 mm(1.5-1.7 inch) or 43-49 mm(1.7-1.9 inch diameter). Objective Lens Cover available in 26-31 mm(1.0-1.2 inch), 31-37 mm(1.2-1.4 inch), 37-43 mm(1.5-1.7 inch), 43-49 mm(1.7-1.9 inch), 49-55 mm(1.9-2.1 inch), or 55-62 mm(2.2-2.4 inch) diameter.

Made of high-strength aluminum alloy, the rifle scope is durable. Completely sealed and 100% nitrogen filled makes the tactical scope fog and rain proof..
3-9x40 AOE scope creates the parallax free view from 15 yards out to infinity. The focus component with moderate damping allows the scope focus fast and accurately..
Red and green illuminated crosshair, 5 levels of brightness setting for each color allow shooters to find the perfect brightness needed for lighting and weather different conditions.
Coming with the free 20mm scope mount, makes it convenient to install the rifle scope..

INCLUDES: Wheeler FAT Wrench & Tipton Gun Vise 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx & Leupold specialty flat blade), ¼” socket & a convenient plastic storage case.
EASE OF USE: Gun Vise features L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape, FAT Wrench allows for application of repeatable, accurate torque settings.
VERSATILITY: Vise is easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.
ACCURACY: Torque Wrench +/- 2 in/lbs up to 40 in/lbs.
40 – 65 is +/- 5%, the Tipton Vise makes it easy to work on your firearms and reach precise specifications during gunsmithing or scope mounting.
DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”, the Vise is made from non-marring, solvent-resistant polymer to stand up to years of hard use for gun maintenance and gunsmithing.