Best Lc Lc Fiber

SHARP LC-37D40U LOGIC BOARD CPWBX3333TPZY 3508

  • LC fiber keystone insert is compatible with Single Mode OS2, 9 microns or Multimode OM1, OM2, OM3, OM4 and 50 microns or 62.5 microns fiber patch....
  • LC fiber coupler joins two duplex multimode fiber patch cables with Low profile LC connectors.
  • Protective caps on the adapter prevent dirt from....
  • Duplex LC adapter with a flangeless design, phosphor bronze sleeve, and stainless steel retention clip accommodates zipcord fiber cables.
  • Sturdy snap-in construction of LC fiber feed-thru coupler keystone provides a secure connection.
  • Installation of female to female keystone insert....
  • Cost-effective 5-pack provides spare keystone jack inserts for last minute cable connections.
  • Re-usable keystone jack inserts with caps can be easily....
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Armored 100Gb LSZH Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g qsfp+ 100gbase mmf ofnr lc-lc

  • Fiber Cable Description: Armored OM4 LC to LC Fiber Patch Cable 3 Meter | 100Gb Duplex LC LC Multimode Fiber Patch Cable 50/125 Corning optical fiber core/cladding. Ceramic ferrule LC to LC fiber patch cable connectors. High bandwidth 100G multimode optical fiber for high speed, low loss, data transmission. Armor wrapped aqua 2.0mm diameter, OFNR jacket, zip-cord. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Laser Optimized MMF Zip-Cord Reinforced, Multimode LC to LC Armored Fiber Optic Patch Cable, Fiber Jumper Cord.
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Eth....
Check Stock

LC to LC Fiber Patch Cable Single Mode Duplex - 3m (9.84ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (1M, OM3-5Pack)

  • Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Duplex LC to LC Female to Female Coupler f/f lc/lc LC-LC LC Fiber Optic Adapter sm mm Coupler Single-Mode Multimode LC Female to LC Female Couplers

  • LC female to LC female Fiber Coupler connect two Duplex LC/LC patch cords together.
  • 6 Pack LC-LC Duplex Fiber Optic Couplers/Adaptors.
Check Stock

LC to LC Single Mode Insensitive Fiber Patch Cord - Duplex - 2M - UPC/UPC - 9/125um OS2 100G (5 Pack) / - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality and Insensitive LC to LC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OS2 9/125 LC/LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm – 0.22 dB/km at 1310 nm.
  • This LC to LC Single mode Duplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..
Check Stock

10-Pack LC to LC Duplex Single Mode Coupler, Fiber Optic Adapter for Singlemode Fiber Patch Cable

  • 10-Pack LC to LC duplex fiber coupler/fiber optic adapter.
  • Connect two singlemode/multimode duplex LC/LC patch cords together.
  • All products are polish cleaned and are dust cap covered.
  • The fiber couplers with low insertion loss and high stability.
  • The fiber adapters have more than 1000 insertions and removals.
Check Stock

LC to LC Fiber Patch Cable Multimode Duplex - 3m (9.84ft) - 50/125um OM3 10G (2 Pack) - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality laser-optimized 50/125 Multimode LC to LC OM3 Fiber Patch Cable is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This Beyondtech Fiber OM3 50/125 LC/LC Fiber Patch Cord conforms with ITU-T G.651.1, TIA/EIA 492AAAC and IEC60793-2-10 A1a.2a standards and complies with all RoHS environmental specifications..
  • This MM fiber has an aqua color jacket with a 3.0mm diameter. OM3 cables have a 1500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources. They also have a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength..
  • This LC to LC Multi mode Duplex OM3 fiber patch cords operate at -20°C to +70°C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OM3 LOMMF connects to 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network..
Check Stock

Cable Matters 5-Pack LC UPC Duplex Fiber Optic Keystone Coupler Jack OM1/OM2/OM3/OM4 Multimode OS2 Single Mode Support

  • LC fiber keystone insert is compatible with Single Mode OS2, 9 microns or Multimode OM1, OM2, OM3, OM4 and 50 microns or 62.5 microns fiber patch....
  • LC fiber coupler joins two duplex multimode fiber patch cables with Low profile LC connectors.
  • Protective caps on the adapter prevent dirt from....
  • Duplex LC adapter with a flangeless design, phosphor bronze sleeve, and stainless steel retention clip accommodates zipcord fiber cables.
  • Sturdy snap-in construction of LC fiber feed-thru coupler keystone provides a secure connection.
  • Installation of female to female keystone insert....
  • Cost-effective 5-pack provides spare keystone jack inserts for last minute cable connections.
  • Re-usable keystone jack inserts with caps can be easily....
Check Stock