Best Laser Subsurface Engraving System

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

  • ▶【Automatically Controlled Air Assist System】 - The traditional air assist kits cannot be controlled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 Pro is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and makes the finished works more high-quality..
  • ▶【Built-in High Pressure Air Assist Nozzle】 - S30 Pro laser cutting machine is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean and smoothy..
  • ▶【High Precision Ultra-thin Linear Rail Engraving】 - S30 Pro laser engraver adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving. Besides, the carving machine adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when e....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • ...o contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser cutter machine, the limit switch is automatically triggered to protect the laser and avoid collisions. The laser engraver will stop working immediately after pressing the emergency button to make engraving safer. Equipped with an all-aluminum alloy anodized structur....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

ATOMSTACK Portable Laser Engraving Machine P7 30W, Mini Laser Engraver 5W Output Power for Metal Engraving, Wood Laser Cutting, Eye Protection Fixed-Focus, 200x200mm

  • Portable Laser Engraver: Atomstack P7 laser engraving machine design for more easier to carry, but still retains up to 5-5.5W laser power can cut thick wood 1/5″, acrylic and engrave stainless steel and ceramic etc materials..
  • Ultra-Fine Compression: Upgraded high-performance fixed-focus could be engraving without adjusting the focal length, the laser focus area is about 50% smaller than other lasers, makes your laser engraving artworks more refined..
  • 5 Min Install: All-aluminum alloy anodized structure design makes the machine more durable, the portable all-metal structure and 85% pre-assembly is very friendly for beginners, which can be complete the installation within a few minutes..
  • Software Compact System: Such as LaserGRBL(free) support Win XP / Win 7 / Win 8 / XP / Win 10/ Win 11, and LightBurn(paid) suport MAc OS system, engraving file format supports NC, BMP, JPG, PNG, DXF etc..
  • Excellent and Portable: The P7 laser machine upgrade with integrated screw rod and stepping motor, helps movement of the laser more precise and excellent engraving capabilities, also more convenient than other traditional machines..
Check Stock

ATOMSTACK A5 Pro Laser Cutter and Engraver Machine, Engraving Cutting Maker with Eye Protection, Output Power 5.5W for Wood Acrylic Metal Leather, 400x410mm

  • New eye protection design:The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles..
  • Solid and easy installation structure design:The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes..
  • Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc..
  • Precise scale lines axis :There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large....
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient..
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm....
Check Stock

Aufero Laser Engraver, Laser Engraving Cutting Machine for Wood and Metal, 32-bit Motherboard LaserGRBL, LightBurn, Eye Protection Compressed Spot, 15.4'' x 15.4'' DIY Engraving Area(AL2 LU2-2)

  • 【Advanced Motherboard】Aufero Laser engraver adopts the advanced motherboard (32-bit MCU) for fast and precise engraving.
  • LU2-2 Laser Module (real luminous power:1,000-1,600mw).
  • 【Excellent Mechanical Structure】Aufero Laser enraving machine is designed with low gravitity center of X-axis, providing more stability and ensuring accurate engraving even at high processing speed.
  • 390mm×390mm large engraving range to meet various DIY needs.
  • 【Broad Compatibility】Aufero Laser cutting engraving machine is compatible with mature engraving software-LaserGRBL(free), LightBurn(paid).
  • supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux system.
  • 【4 Safety Protection】→ 1: Active Position Protection.
  • 2:Exposure Duration Detection and Limitation.
  • full safety protection allows you to hook on your project without any worry.
  • 【Dual Eye Protection】Aufero Laser engraver features a protective cover which effecitvely protects your eyes from dazzling beam.
  • comes with a pair of goggles for more protection.
  • works on food, MDF, paperboard, plywood, black acrylic, leather, power coated metal, stone, ....
Check Stock