Best Large Diameter Pipe Line

RainDrip 052020P Drip Watering Hose , Black Polyurethane 1/2 inch x 200 Ft

  • ...that branches off larger tubing or pipe.
  • and with emitters punched into the tubing to deliver water along the line.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Works with Raindrip products and other products with compatible connection type.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
Check Stock

50 PCS 1 inch Greenhouse Clamps Clips Black ABS Snap Clamp Tube Clip Garden Buildings Tube Clip for Greenhouse Film, Sunshade Nets, Frame Shelters

  • Specification: You will get 50 pieces black tube clips, each black snap clamp length is 3inch (8cm), the outer diameter is 1.26 inch (3.2cm). It is suitable for pipes diameter up to 1 inch, as well as pipes with slightly larger or smaller diameters, please confirm the pipe diameter before purchase..
  • Widely Use: These rugged ABS fixtures are suitable for fixing greenhouse film, sunshade nets, seam frames, etc. It can also be fixed line cover, shelter, bird protection, dog bed, shower curtain, wire, branches and other places..
  • Practical Application: These snap clamps are compatible with many types of 1 inch pipes, such as PVC pipe, metal pipe, plastic pipe, wood pipe, steel pipe, etc. as long as the pipe size is appropriate, it is basically suitable. It fastens the plastic to the pipe so that you can easily build a greenhouse with these plastic clips..
  • Reliable Material: These tube clips are made of high quality ABS material, it has the characteristics of high temperature resistance, wind resistance, nice strength, good toughness and not easy to fracture. Seiko production, smooth surface without burr, stable structure, with better grip..
  • Flexible Use: The tube clip is very light and flexible, can be moved at any time and easy to install, it is the ideal ch....
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

LOKMAN 5 Pack 12 Inch Stainless Steel Hose Clamps Large Worm Gear Duct Clamps Adjustable from 11.5 inch-12 inch / 290mm - 310mm Fuel Line Hose Pipe Clamp for Dryer Vent Hose

  • 12 inch Size is for DIAMETER, NOT FOR circumference. - 304 Stainless Steel Hose Clamps- The whole large duct vent clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant..
  • Flexible adjustable size rang- Flexible and durable metal fuel line hose clamp with adjustable diameter size range from 11.5 inch-12 inch. Fit for hose diameter 290-310mm/11.5-12 inch. Secures ducting tightly in place..
  • Widely Use- These large metal hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor..
  • Great Value - LOKMAN large quantity set stainless steel hose clamp achieve great favorable price. The large quantity, the more favorable price. You can't miss it if you need a large bunches..
  • Environmentally Friendly- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

KEONG 5-Feet Fuel Line Hose Tube with 4 Size I.D. x O.D. 3/32In x 3/16In 1/8In x 3/16In 1/8In x 1/4In .080In x .140In for Poulan Craftman Chainsaw String Trimmer Blower, 5 Feetx4

  • Adapt to temperature: -30 ° C -120 ° C.
  • The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
  • Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market..
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small with 1/4" or 5/16" fuel lines engines..
  • Package includes: 6 Feet 1/4" ID Fuel Line.
  • 10 Pcs 13/32''-15/32''' Mini Fuel Hose Clamps Adjustable. Fuel filters and hose clamps are required for the use of fuel line. The dimensions of the various components within the kit are compatible.You do not need to purchase those part extra!.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire，very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock