Best Large Dia Pipe Extruder

Piutouyar 50 Pack 12MM Two Hole Strap U Bracket 304 Stainless Steel Rigid Pipe Strap Clamp Heavy Duty Tube Strap Tension Clip (1/2 Inch)

【SIZE】- Fit Pipe Diameter: 60mm/ 2.36".
Total Size: 107 x 18 x 60mm / 4.21" x 0.71" x 2.36" (L*W*H).
【MATERIAL】- Made of 304 stainless steel, strong rust and corrosion resistant for a long time use.
【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
【PACKAGE CONTENT】- 5Pcs × Rigid Pipe Strap.

...en by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
【Smarter Printing Experience】Auto mesh bed leveling adopts a non-....

Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
Steps of installation: 1.Prepare a fuel line hose.
Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.

Designed and engineered from black oil-tempered wire.
Ideal for pipe cleaning, flue cleaning, boiler tube cleaning.
Industrial grade performance line, fitted with 1/4 x 2 in NPT pipe nipple.
Brush dia 2-1/2 in, filament dia .012 in, brush length 4-1/2 in, overall length 7-1/2 in.

【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....

Carbon Steel Screw Size: 8 x 64mm / 0.31" x 2.52"(Thread Dia*Total Length).
Package Content: 4pcs(+/-2%) x Plastic Expansion Tubes.
Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..

【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
Note: Mounting screws are not included here.

Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....