Best Lab Oscilloscopes Channel

Hantek DSO4102C Digital Multimeter Oscilloscope USB 100MHz 2 Channels LCD Display Waveform Generator

  • 4 analog channels, 1GSa/s real-time sampling rate and 70MHz bandwidth, USB2.0 Interface, plug and play device.
  • The operation interface is similar to banchtop oscilloscope, easy to operate with high cost performance.
  • Good mechanical design with small size which is easy for carrying.
  • One computer could connect with multiple oscilloscopes, expand the channel number easily.
  • More than 20 kinds of automatic measurement function, Software support: Windows10, Windows 8, Windows 7.
Check Stock

Hantek 6022BL 48MSa/s 16CH PC USB Digital Storage Oscilloscope Logic Analyzer

  • It has 4 analog channels, 1GSa/s real-time sampling rate, 70MHz bandwidth, USB2.0 Interface, plug and play device.
  • The operation interface is similar to banchtop oscilloscope, easy to operate with high cost performance.
  • Good mechanical design with small size which is easy for carrying.
  • One computer could connect with multiple oscilloscopes, expand the channel number easily.
  • More than 20 kinds of automatic measurement function, with Arb. waveform generator, Software support: Windows10, Windows 8, Windows 7.
Check Stock

Proster 100 MHz Oscilloscope Clip Probes with BNC to Mini Grabber Test Lead Kit BNC to Mini-Grabber Clips Oscilloscope Probe

  • Universal Oscilloscope Probe: 10:1 and 1:1 switchable bandwidth 100MHz, suitable for oscilloscopes from all manufacturers , equipped with the standard BNC connector.
  • Test lead of a BNC connector to 2 mini-grabber clips: 48 inch mini-grabber clips coded in black and red, keep this handy lead on hand for your next electronics project.
  • High Sensitivity: Fully shielded welding BNC connector, less signal interference.
  • pure copper plated gold pin, less contact resistance and good contact performance.
  • Interchangeable Probe Tip. High Input Impedance (X10 Range). Low power consumption and energy-saving.
  • Suitable for all digital oscilloscopes and analog oscilloscopes voltage detectors to test circuit.
Check Stock

Micsig Oscilloscope Probe CP2100A AC/DC Current Probe 800KHz 10A/100A with Standard BNC Interface

  • The CP2100A Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually. Bandwidths up to 800KHz..
  • The split design makes the probe small and exquisite , easy to carry and use..
  • This CP2100A Current Probe can be powered by Oscilloscopes USB port and doesn't require any extra power supply..
  • It comes with a standard BNC interface, applicable to all BNC interface oscilloscopes. It also can be used with a multimeter after adding the suitable adapter..
  • Satisfaction Guarantee: We offer a 1-year manufacturer’s warranty and lifetime customer support for this product..
Check Stock

Autel MaxiScope MP408 4-Channel Automotive Oscilloscope Compatible with MS906 MS906BT MS906TS MS908S MS908S PRO MS Elite Test Electrical and Electronic Components and Circuits USB Power Supply

  • Autel MP408 can work in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool via the MaxiScope Software, a....
  • Autel MaxiScope MP408 4-CHANNEL PANEL:Faster Sampling, Autel MP408 can capture signals four times faster than any other oscilloscopes, a high speed....
  • Autel MaxiScope MP408 measures and tests virtually all the electrical and electronic components and circuits in most modern vehicles. In addition, it....
  • Featuring one-click auto setup of the voltage scale and time base, Autel MP408 is compatible with LIN, CAN and FlexRay data bus standards to read and....
  • Autel MaxiScope MP408 guarantees that this product will be free from all defects in materials and workmanship for a period of one (1) year from the....
Check Stock

Fristaden Lab Linear Pipettor Stand Holds 8 Pipettes, Laboratory Pipette Rack, Pipettor Holder Fits Up to 8 Laboratory Pipettes, 1 Piece | 1 Year Warranty

  • ORGANIZE YOUR WORKSPACE: The American-brand Fristaden Lab linear pipettor rack provides a quick, easy method for keeping pipettes clean and organized..
  • HOLD UP TO 8 PIPETTES: The lab pipette rack can hold up to eight laboratory pipettes..
  • COMPATIBLE WITH MOST BRANDS: The stand can hold most major pipette brands, as well as both single and multi-channel pipettes..
  • STRONG AND STURDY RACK: The rack is held together well and won’t easily fall or break. It is easy to assemble and can be set up in five minutes or less..
  • AMERICAN COMPANY: Fristaden Lab is an American lab equipment company. We back the pipette stand with a 1 Year Warranty..
Check Stock

Autel MaxiScope MP408 4-Channel Automotive oscilloscope Works with PC or MS Tablet MS908S MS908S PRO MS908CV MK908 MK908P MS906BT MK906BT MS906TS MS Elite Reads and displays Electrical Signals MP408

  • Autel MaxiScope MP408 4-CHANNEL PANEL:Faster Sampling, Autel MP408 can capture signals four times faster than any other oscilloscopes, a high speed....
  • Autel MP408 can work in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool via the MaxiScope Software, a....
  • Autel MaxiScope MP408 measures and tests virtually all the electrical and electronic components and circuits in most modern vehicles. In addition, it....
  • Featuring one-click auto setup of the voltage scale and time base, Autel MP408 is compatible with LIN, CAN and FlexRay data bus standards to read and....
  • Autel MaxiScope MP408 guarantees that this product will be free from all defects in materials and workmanship for a period of one (1) year from the....
Check Stock

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

  • 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
  • PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
  • MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
  • PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
  • AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.
Check Stock

1000uL Filter Pipette Tips - Universal Lab Pipette Tips - Sterile Pipette Tips 1000 ul - Tips for Pipette - DNase/RNase/Pyrogen Free Low Binding 10 Racks of 96 Tips

  • Racked Pipette Tips: All Kashi Scientific micropipette tips come in racks of 96 pipette tips. Racks are all individually wrapped to ensure sterility. Each box comes with 10 racks of 10 ul pipette tips a total of 960 pipettor tips. Racked pipette tips are standard size compatible for use with single channel, 8 channel, and 12 channel pipettes..
  • Safe, Clean, & Sterile Tips: All Kashi Scientific plastic pipette tips are made of high quality polypropylene material that are free of detectable human DNA, DNase, RNase and pyrogens. Our lab pipette tips are manufactured in cleanrooms and went through sterilization process after being racked. All racks are individually wrapped to maintain sterility during fast delivery process..
  • Accuracy and Precision: Low binding pipette tip with perfect air tight seal minimizes liquid volume loss and maximizes precision during liquid aspiration and dispense with manual or electronic pipettes. Our low binding racked tips for pipette will reduce the adhesion of liquid to plastic pipette tips during pipetting and improve the accuracy of the experiment..
  • Autoclavable Pipettes Tips: Our pipette tips, both filtering and non-filtering micropippette tips can withstand temperature range - 80℃ to 121℃ with no de....
Check Stock