Best K Type Fittings

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....

Fits DeWalt: DC308K Type 1, DC318K Type 1, DC330B Type 10, DC330B Type 11, DC330K Type 10, DC330K Type 11, DCS331B Type 1, DCS331B Type 11, DCS331B Type 12, DCS331L1 Type 1, DCS331M1 Type 1,.
DCS331M1 Type 11, DW331K Type 1, DW331K Type 10, DW331K Type 11, DW331K-AR Type 10, DW331K-B2 Type 10, DW331K-B2 Type 11, DW331K-BR Type 10.

Good for Multimeters, clamp Meters and thermometers that accept a type K temperature probe..
This K-type probe pipe clamp's operation temperature: -40~200℃..
Probe connection type: K-Type pipe clamp..
A good K type pipe clamp accessories for temperature measurement..
Lead thermocouple clip,Suitable for industrial temperature measurement..

Dewalt replacement chuck key, part number N022653.
Compatible with: DW505 Type 4, DW505-AR Type 6, DW505K Type 4, DW511 Type 3, DW511 Type 4, DW511 Type 5, DW511K Type 3, DWD024-AR Type 1, DWD024-B2C Type 1, DWD024-B3 Type 1, DWD024-BR Type 1, DWD024AV-B2 Type 1, DWD024AV-B3 Type 1, DWD024K-AR Type 1, DWD024K-B2 Type 1, DWD024K-B3 Type 1, DWD520 Type 1, DWD520 Type 2, DWD520-B2 Type 1, DWD520-B2 Type 2, DWD520K Type 1, DWD520K Type 2, DWD525K Type 1, DWD525K Type 2, DWE5010 Type 1.
Measures approximately 4.25 X 1.55 X 0.65 inches.

63 pcs Potentiometer Assortment, contains type 'A' logarithmic taper, 'B' linear taper and 'C' reverse logarithmic taper.
Includes 1K, 5K, 10K, 20K, 50K, 100K, 250K, 500K, 1M, B type comes 3 pcs each, A and C type each 2 pcs.
3 pins, Power: 0.2W, Axis Diameter: 6,3mm (0.24 inch), Axis Length 16mm (0.6 inch), Axis without Thread 8mm (0.3 inch), horizontal terminals, knurled split shafts.
Nuts and Washers are included, 10-15 black knobs come as a bonus.
Each type comes accordingly sorted in a labeled recyclable PP plastic box.

pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).

Eliminate The Guesswork Of Which Wrench Is Needed To Tighten, Remove Or Check Steel Braided Hose Fittings.
Prevents Damage To Fittings And Is For Fittings.

SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.

Material - Made of quality PU & Plastic. High pressure resistance, can withstand strong pressure without tripping out. Great for long term use. Push to connect fittings type: 1/4'', 5/16'', 3/8'',1/2'， fit for 6mm 8mm 10mm 12mm OD tube.
Easy to use: Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing..
Convenience: Quick Connect Fittings easy to install, flexible and space-saving, 360-degree rotate, Release rings adopt ellipse design, which can be removed conveniently. No extra sealing needed, just need a simple push, provide secure connection..
Application: It is widely applied in industries automatic production equipment like machinery, electronics, automobile, packaging.
Quantity: package includes 40 pieces fittings, 10pcs for 1/4" fittings, 10pcs for 5/16" fittings, 10pcs for 3/8" fittings, 10pcs for 1/2" fittings, meet your requirement for various purposes.