Best Jig Boring Machine

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

  • A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
  • The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

  • JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig.
  • BORING, IN A GOOD WAY – Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments.
  • STANDARD SIZE – 3/8″ shaft and chuck are used for this quick tool conversion while it works smooth with no wobble.
  • PRECISE USE – A reliable depth stop is included to ensure each task goes as expected.
  • ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary.
Check Stock

MOSILVERON Wood Drilling Woodworking Hole Boring Bits Set Power Rotary Cutting Tool for 35mm Concealed Hinges

  • Bore Clean, Perfect Holes for 35mm Concealed Door Hinges.
  • Suitable for MOSILVERON 35mm concealed hinge jig.
  • Drilling Diameter: 35mm (1.37") Shank Diameter: 10mm (0.39") / Shank Length: 25.4mm (1").
  • Hinge Boring Bit Total Length: 90mm (3.54").
  • Spurs create clean hole edges without tearout.
Check Stock

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Amana Tool 203202 Carbide Tipped Hinge Boring Drill Bit 20mm Dia x 70mm Long x 10mm Shank Right Hand

  • HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed.
  • DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
  • DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
  • PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 20 mm. Overall length (L): 70mm. Rotation: right hand..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Collins Tool Company Coping Foot

  • Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.
  • The Coping Foot is formed from 14 ga. plated steel. Youll wear out a couple of jig saws before you wear out your Coping Foot..
  • Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.
  • Will not work on Festool Carvex, get the Collins Festool Carvex Coping Foot instead.
Check Stock

Coping Foot，Foot Tool for Jigsaw Compatible with Most jigsaws，High Efficiency Woodworking Tools for Jigsaw

  • Fit for Most Jigsaw：Our Copying tools Fit for most jig saws except for Porter-Cable, and the Bosch 1590 and 1591. A variable speed jig saw is....
  • Improve You work Efficiency:Our Copying tools make your jigsaw become a simple and accurate coping machine without the need for jigs and....
  • Tough Steel Construction：Made of plated steel to last a lifetime.Our Coping Foot is formed from 14 ga.Size：4.4 x 3.4 x 1.2 inche Made in....
  • Easy To Install：Our Coping Foot is easy to install and remove to different kinds of jig saws with a few minutes. Easy to learn How to install Our....
  • What You Get：A Tough Steel Construction Coping Foot for Most Jigsaw.Simply email us back if our product ever fails you and we'll mail you a new....
Check Stock