Best Jeep Trailer

Tekonsha 9030 Voyager Electronic Brake Control Black

  • PROPORTIONAL ELECTRIC BRAKE CONTROLLER: Provides automatic braking based on the intensity and rate at which you apply your tow vehicle’s brakes,....
  • EASILY INSTALL THANKS TO PLUG & PLAY: The Voyager trailer brake controller has a snap-in dash mounting clip, Plug & Play port for two plug adapters,....
  • EASY-TO-READ INDICATOR: Color LED indicator shows settings, real-time diagnostics, and alerts. Red light means power increase to trailer brakes. Green....
  • MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The Voyager will apply....
  • VERSATILE: The Voyager electric brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and....
Check Stock

Tekonsha 8507120 Brakeman IV, Time-Delay Brake Controller For Trailers with 1-4 Axles, Black

  • TIME-DELAYED DIGITAL BRAKE CONTROLLER: Applies braking power that ramps up, or increases over a period of time, at a fixed rate. This makes the Tekonsha Brakeman IV brake controller ideal for basic, light-duty towing needs.
  • EASILY INSTALL: The Brakeman IV trailer brake controller has a Plug & Play port for easy installation. As a time-based controller with a compact design, the unit can be installed above or below the dash, in any direction, as it is within reach of the driver.
  • EASY-TO-READ INDICATOR: Digital display shows settings, real-time comprehensive diagnostics, and short circuit protection. Red light means power increase to trailer brakes. Green light means secure connection with trailer “.
  • MANUAL BRAKING AVAILABLE: If you ever need to manually apply the brakes, simply move the manual control lever to the left. The Brakeman IV will apply power to your trailer’s brakes up to the amount of power previously set.
  • VERSATILE: The Brakeman IV digital brake controller is compatible with a wide range of vehicles including Ford, GM, Chevy, Dodge, RAM, Toyota, Jeep, and more with 2, 4, 6, and 8 brakes (1-4 axles). Vehicle-specific Tekonsha Plug & Play brake controller wiring harness sold separately.
Check Stock

CURT 13900 Multi-Fit Class 3 Adjustable Hitch 2-Inch Receiver 5,000 lbs.

  • VERSATILE FIT. This particular hitch is compatible with select vehicles from Chevrolet, Chrysler, Dodge, Ford, GMC, Isuzu, Jeep, Mazda, Nissan,....
  • STANDARD RECEIVER. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing....
  • DEPENDABLE STRENGTH. This adjustable hitch receiver is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated....
  • FULLY TESTED. The adjustable tow hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and....
  • RUST, CHIP, UV-RESISTANT. This universal trailer hitch is protected with a durable black powder coat finish for long-lasting resistance to rust,....
Check Stock

Retired Air Force Custom Hitch Plug for 2

  • This trailer hitch cover plug is made of heavy duty black rubber, fits for standard 2"" x2"" receiver tube and hitch ball..
  • Hitch cover mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required..
  • 2inch tow hitch cover, universal fit 2-inch x 2-inch receiver tube, compatible with Class 3 III and Class 4 IV and Class 5 receivers, compatible for Ford GMC Toyota Jeep Dodge Nissan Audi BMW Porsche Chevrolet Mercedes Benz Polaris ATV UTV..
  • This heavy duty rubber plug is designed to protect receiver tube in heavy weather, keeps the rain, dust, snow and ice from the hitch tube and protect the receiver tube from rust..
  • The hitch receiver cover is designed for optimal convenience, allowing you to install it in a moment, whenever needed. Just fit it into the hitch receiver and push it into place..
Check Stock

CURT 13392 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Jeep Wrangler JL , Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight, 350 lbs. tongue weight, 4,000 lbs. weight distribution capacity and 400 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Jeep Wrangler JL.
Check Stock

CURT 13434 Class 3 Trailer Hitch 2-Inch Receiver Fits Select Jeep Gladiator JT Pickup Truck Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Jeep Gladiator JT (Hitch is not to be used in Weight Distribution Applications).
Check Stock

CURT 99309 Class 3 Trailer Hitch, 2-Inch Receiver, 4-Pin Wiring Harness, Select Toyota Highlander, Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 600 lbs. tongue weight, 7,500 lbs. weight distribution capacity and 750 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Dodge Durango and Jeep Grand Cherokee WK2.
Check Stock

CURT 45797 Trailer Hitch Adapter 2-Inch Receiver 2-in Drop or Rise 7,500 lbs

  • VERSATILE ADAPTER. This receiver hitch adapter easily inserts into your trailer hitch whenever needed to drop or raise the connection point by 2....
  • DINGHY TOWING. This drop hitch adapter is perfect for flat towing a car, SUV, Jeep or truck, allowing you to level your tow bar and vehicle base....
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch receiver. It also accepts any....
  • SOLID STRENGTH. This raised hitch adapter is constructed from high-strength steel to ensure reliable towing. It is rated for 7,500 pounds.
  • CORROSION-RESISTANT. CURT drop receiver adapter hitched are finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
Check Stock

CURT 45798 Trailer Hitch Adapter 2-Inch Receiver 4-in Drop or Rise 7,500 lbs black

  • VERSATILE ADAPTER. This receiver hitch adapter easily inserts into your trailer hitch whenever needed to drop or raise the connection point by 4....
  • DINGHY TOWING. This drop hitch adapter is perfect for flat towing a car, SUV, Jeep or truck, allowing you to level your tow bar and vehicle base....
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch receiver. It also accepts any....
  • SOLID STRENGTH. This raised hitch adapter is constructed from high-strength steel to ensure reliable towing. It is rated for 7,500 pounds.
  • CORROSION-RESISTANT. CURT drop receiver adapter hitched are finished in a highly durable black powder coat to withstand rain, dirt, UV damage and....
Check Stock