Best Jack Plate Made From

KUAFU Jack Plate Adjustable 8'' Outboard Boat Jack Plate Aluminum Manual Power-Lift

  • The outboard jack plate is the perfect solution for long shaft engines with a short shaft transom. The jack plate allows the boat to navigate in shallower waters, which is difficult for a normal engine to do. It also reduces fuel consumption and gives you a good value for money..
  • The outboard jack plate is made of stainless steel fasteners for maximum strength and durability. Durable, anti-wear and anti-rust, not easy to damage, so that you do not need to worry about the problem of broken or rust in daily use..
  • Adjusts easily by turning one steel bolt, offers 4 inches of adjustable Vertical movement,8 inches of setback, Weighs 32 lbs, 225 Maximum Horsepower. Bronze and Brass hardware eliminate binding..
  • The size can be adjusted according to your needs. Item type: Outboard Jack plate.
  • Feature: Color: Sliver, Material: high strength polished Aircraft Quality Aluminum, Condition: New..
  • BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE: We are sure you will love our high quality products. However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee..
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • ...are lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not in....
Check Stock

T-Post Puller Fence Post Puller - 36 & 20 Adjustable Height

  • Your metal tool helps remove posts from hard frozen ground by using a handyman jack, chains, tractor buckets of s hook..
  • This t-post puller plate is to be used for the removal of T-posts from the ground with a chain quickly and easily..
  • Your puller plate is made from high grade carbon steel.
  • Your t post puller plate size is 5.9 x 3.1 x 0.6 inches.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

2 Ethernet and 1 Coax Wall Plate,2 Port Cat6 Keystone Female to Female 1 Port F Type Connector Coax Keystone Female to Female Wall Plate …

  • ✅ Easy to install - Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and....
  • ✅ Easy to clean - The surface of this wall plate is smooth and it's easy to clean.
  • ✅ Convenient usage - This wall port jack is the perfect solution for connecting TV boxes, Router or other Coax/Ethernet Channel-enabled devices to....
  • ✅ Standard size - 7cm*11.5cm (W*L) wall plate with 2 pcs screws, Removable Coax Keystone jack and Cat 6 keystone jack..
  • ✅ Package Contents - 3 Port Wall Plate + 1 x Coax Keystone Jack + 2 x Cat6 Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..
Check Stock

Greenten Chrome Roller String Trees Retainers,String Guides with Screws Replacement,1 Pair

  • Package includes: 2x jack socket + 8x mounting screws.
  • Jack Socket Cover plate for Square Style..
  • Standard square plate which is used commonly..
  • Mainly for guitar bass jack plate replacemen,replace your worn out parts..
  • Easy to install and looks very professional..
Check Stock