Best Ir Illuminator For Raspberry Pi

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4, 3 B+, 3B, 2B, Pi Zero RPi Infrared Night Vision

  • NEW RASPBERRY PI CAMERA MODULE V2: MX219 8-megapixel sensor with fixed focus lens, which is not only a resolution upgrade, but also a leap forward in image quality, color fidelity, and low-light performance..
  • HIGHER RESOLUTION: NOIR Camera V2, Capable of 3280 (H) x 2464 (V) still picture resolution and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes. No infrared filter, supports night vision..
  • BETTER COMPATIBILITY: This RPi camera module supports all models of Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi 2 and 1 and Jetson Nano Developer Kit..
  • WILD APPLICATION: This pi camera can be used to take high-definition videos as well as still photographs. It can capture IR photographs, better performance in the night and low light vision, especially suitable for wildlife photography, home security and surveillance, NDVI in agriculture, etc..
  • PACKAGE LIST: An 8mp Raspberry Pi official NOIR camera V2 with a 15cm original FFC cable..
Check Stock

Arducam for Raspberry Pi Zero Camera Module Wide Angle 120°, 1/4 Inch 5MP OV5647 Mini Camera with Flex Cable for Pi Zero and Pi Compute Module

  • Supports raspberry pi zero only. For Raspberry Pi Model A/B/B+, Raspberry Pi 2/3/3B+, please search “B012QRGUCQ”..
  • Sensor: 1/4 inch OV5647 sensor in a fixed-focus lens, angle of view: 120° diagonal.
  • Still picture resolution: 2592 x 1944, Max video resolution: 1080p.
  • Dimension: 60mm × 11.5mm × 5.5mm. NOTE: raspberry pi zero is not included..
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: Compared with Raspberry Pi Camera Module V2, this camera module offers higher resolution, up to 12.3MP. Also adopting 12.3MP IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vis....
Check Stock

MakerFocus Raspberry Pi 4B Camera IR Camera Module 75 Degree 5MP OV5647 Webcam Automatically Switching Between Day and Night Vision with Holder and Cable for Raspberry Pi 4B 3B+ Zero and Zero W

  • Video tutorial available in the product guide and documentation.Night Vision Camera - Link to see what is happening even in the dark. Video Tutorial: Please get the link from the product description below.
  • Built-in IR-CUT Automatic Switching Filter - In day or night, the dual filter automatically switches the filter for optimal imaging. Manual settings are not required, plug in then it can be used. The advantage is that during the day, the photographs taken will not be reddish.
  • HD Video Infrared Camera - Enjoy sharp 1080p video. It features two high intensity Infrared LED spotlights for night time recording and surveillance.
  • 5MP OV5647 Camera - Support 1080P resolution, 3.6mm focal length, FOV (Diagonal) is 75 degree.
  • Comes with Hight Quality Acrylic Holder - Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like.
  • Comes with Two Adapter Cables - Compatible with Raspberry Pi Model 4B / 3B+ / 3B / 2B+ / 2B / B / Raspberry Pi Zero and Raspberry Pi Zero W.
Check Stock

KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W, High-Power Motor Speed Control Board Dual H Bridge with IR Receiver

  • This Motor Driver HAT gives your Raspberry Pi the ability to drive two DC motors, with drive current up to 2A..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions.
  • Reserved I2C SPI control pins, allows to work with other control boards and sensors. Comes with an IR receiver for communication with an infrared remote controller..
  • Included 4x M2.5*20MM screws, 4 xM2.5*10MM copper pillars, 4x M2.5 Nuts. Easy to install on your RPi board. Please note Raspberry Pi board, remote control and motors in the photos are Not Included!.
Check Stock

for Raspberry pi Camera Day & Night Vision IR-Cut Video Camera 1080p HD Webcam 5MP OV5647 Sensor for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Zero W by Longruner

  • ♥All-day image - it's built-in ir-cut camera, automatically switches day and night mode for better and clearer image. This can avoid image color....
  • ♥Support all PRI model - This Raspberry Pi camera Compatible with Raspberry Pi 4/3/2/1 model B/ B +/ a + Pi zero & w..
  • ♥Csi interface - This Pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data....
  • ♥1080P HD Webcam - the IR video Camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 P @ 60 FPS and 640 x480....
  • ♥Strong customer service team - as long as you have any questions about the product, we will solve your problem immediately when we receive your....
Check Stock

Lens Board OV5647 Sensor for Raspberry Pi Camera, Arducam Adjustable and Interchangeable Lens M12 Module, Focus and Angle Enhancement for Raspberry Pi 4/3/3 B+

  • Focus the sharpest way - From less than an inch to infinity, you get easy focus control on a 5MP Raspberry Pi camera simply by spinning and tuning the lens and the locking ring. Check B07SN8GYGD for software autofocus/manual focus.
  • Compose the perfect frame - You decide how to frame up the best image by picking an m12 lens with the best FoV (Field of View) you need with a variety of M12 lenses on the market to choose from.
  • Example projects - Shoot a waterdrop half an inch away with tuned focus.
  • Shoot a QR code or A4 paper from the other end of the room with telephoto M12 lens.
  • Options - Get M12 lens set “Arducam LK001” for optical testing and “Arducam LK002” for minimum distortion in machine vision.
  • Get “Arducam B0055” for m12 fisheye and “Arducam B003503” for m12 night vision. Get a lens without IR filter to make this camera IR sensitive. Contact Arducam for other options.
  • Note - 1. This board is slightly larger(36cm) than the official Raspberry Pi Camera V2 so it does not fit some cases for Raspberry Pi, but it’s natively compatible with the commands and scripts.
  • 2. It works with Pi Zero, but you will need to buy an extra cable. 3. Be gentle while changing the lens and holders or you might....
Check Stock

Argon ONE M.2 Aluminum Case for Raspberry Pi 4 with Power Button and Fan | SATA SSD Support | B-Key and B+M Key Compatible

  • Most powerful Raspberry Pi 4 case with M.2 SATA SSD Carrier Board, Power Button, Controllable Internal 30mm Fan & IR Sensor.
  • Integrated with M.2 SATA Expansion Kit for use with M.2 SATA SSD B-Key or B+M Key.
  • power and transfer via USB 3.0 Port. With safe shutdown power button & software controllable 30mm fan..
  • Keeps RPI 4 cooler with aluminium case enclosure and heatsink. GPIO access via removable magnetic cover..
  • Neat cable management. Easily connect power cable, two (2) full sized HDMI display ports, GPIO accessories and comes with built-in IR..
  • Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..
Check Stock