Best Inverter Mig Welder

TROOZY × Rilon MIG Welder 135E, Flux Core Welder Machine, 110V IGBT Inverter with Inner Wire Feeder, Portable Gasless Welding kit 100A DC, Yellow

  • Beginner-friendly: No need for expertise. Use ONE knob to switch on/off while adjusting plate thickness by the original welding machine chip, and intelligently identify the welding material to automatically match the voltage and wire feed speed.
  • Continuous High Efficiency: Leading industrial-level IGBT inverter ensures an exquisite welding process through Infinite Voltage and Closed-loop control of wire feeding speed, guarantees smooth arc start, more stable welding with less spatter.
  • Energy Saving: Reduce power consumption and increase the durability of fan with the smart high-speed cooling system that automatically switches according to component temperature. It also helps keep machine Components clean, reducing machine failure rates.
  • CSA Certification: With overheat, overcurrent, overvoltage, under-voltage protection and trusted CSA certification, also adapts to 15% fluctuation of network voltage and can weld stably at 95~127V, this is a safe, reliable, and human-friendly welder.
  • Portable Design: Smaller body 12.5*5.3*9.4 inch, weighs 11.9lb, with shoulder strap, easy to carry and store. Thanks to the 60KHz efficiency inverter for increasing capacity.
  • Versatile: Applicable to multiple plates of steel, including mild steel, medium carbon steel, and high....
Check Stock

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

OPTICO MIG 135E Welder Machine 110/120V IGBT Welding Machine Gasless Flux Cored Welder Automatic Wire Feed Welder with 40-100A for Beginner DIY Home Portable Welding Machine Kit with Mask

  • ✔【Great Welder for Home Repairs】Use 1 kg (0.8 mm) flux cored wire to weld on (0.5 mm-5mm) workpieces. Suitable to weld carbon steel, low alloy....
  • ✔【Beginner Friendly】One-Knob Intelligent control system. This mig welder machine will auto control the voltage and current to achieve smooth....
  • ✔【Intelligent Protection】This mig welding machine has automatic protection functions of overcurrent, overvoltage and overheating. After the....
  • ✔【Portable Welder】Lightweight and Portable - IGBT inverter gasless flux welder machine, only 15.2 lbs and 12.52 X 5.31 X 9.45 inches. With....
  • ✔【Professional CSA Certificate】This Welding Machine have CSA certificates that recognized in both the United States and Canada. Package Content:....
Check Stock

MIG Welder ，MYYWELD Welding Machine 160A 3 in 1 MMA/MIG/LIFT TIG Welder Machine with IGBT Inverter，Flux Core Welder Gas/Gasless Welding Wire Dia 0.8-1.0 mm 2lbs Welding Wire Stick Welder 220V

  • 1.EASY TO USE-This welder is a perfect entry level dual digital display easy to read and set. Besides, the welder machine uses 0.8mm.or 1.0mm flux....
  • 2.BROADLY APPLIED- Our stick welder is a wide range of uses-suitable for basic DIY such as household welding, hanger, covering, guardrail, Repair,....
  • 3.IGBT TECHNOLOGY -Using IGBT inverter technology gives a more stable performance than traditional welder. It has the following advantages--stable....
  • 4. MULTIPLE WELDING-MIG/lift TIG/stick/MMA welding machine,gas/gasless modes all are available. Can be used for welding kinds of metals. Meeting....
  • 5. THE PACKAGE INCLUDS -1 MIG-160Welder Machine, 1 welding holder, 1 ground clamp ,1 welding torch, 2 hose clamps , 2lbs welding wire, 1 transparent....
Check Stock

(2) REFLECTIVE RED - Safety First Hard Hat Stickers (Pair) | OSHA Helmet Decals | Toolbox First Aid Labels | Glow Bright Union Laborer Welder Fall Protection Confined Space Trained

  • Advanced IGBT Technology: Our MIG-130 adopts the most advanced IGBT inverter technology with excellent arc stability. Rated output current: 130 Amps. Output current range: 40 - 130 Amps. Suitable for welding carbon steel, iron, stainless steel, and other metals..
  • Convenient Flux Cored Wire: This mig tig stick welder can use flux-cored welding wire and solid welding wire. Feeding speed adjustment range: 8.20 - 42.65 ft/ min. MIG welding wire: 0.024 - 0.031 in. Included welding wire: 1 kg. It is the perfect entry-level welder choice..
  • Easy Control Panel & 3 In 1: MIG welding machine has MIG MMA TIG mode. The welding machine has included with function switching buttons and a current-voltage control knob, the intelligent digital display makes the operation easier for you..
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload.
  • it is protected against splashing water, with a protection level of IP21, which has good water resistance..
  • Compact and Portable: Lightweight 28.7 p....
Check Stock

ETOSHA 140Amp MIG Welder, Flux Core Welder AC 110V Gasless Welding Machine with IGBT Inverter, Automatic Wire Feed Welders Portable Metal Welder No Gas 110 Voltage 140A Compact Welder with Welding Gun

  • Easy to Use: This welder features an automatic adjustment function, which is no need to match working voltage and feeder speed separately. With thickness adjustment knob to suit your different applications. Even beginners will find it simple to use..
  • High Efficiency: The welding machine uses 0.030/0.035in flux core wire. Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate. Big enough to handle 2.2 pound rolls of wire..
  • Safety Protection: MIG 140A IGBT Inverter welder, reliable and stable. Steel welder machine with electric choke control, less spattering, deep penetration and good formation. Automatic thermal safety protection, overload safety protection keep you safe..
  • Wide Applications: Lightweight 14.77lbs. The ergonomic handle design makes the welder machine very easy to carry. It is very suitable for Home DIY and Repair, Maintenance, Metal Fabrication, farm & road equipment..
  • Package Includes: MIG-140 Welder machine.
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • ...ons and suitable for wide occasions. It can be used for hardware welding materials, home DIY, industrial installation, automobile maintenance, machinery manufacturing, engineering operations, steel structure welding. A great choice for home repairs and hobby projects on light gauge steel..
  • Packing List -1X soldadora inverter 110v 220v Dual Voltage MIG 130D/ 1X Ground clamp/1X Welding holder/ 1X MIG welding torch/1X Flux cored wire 1kg/ 1X Welding hose/1X 20cm Conversion Line/1X V-shape wire feed wheel/ 1X Gear wire feed wheel ( installed on the machine)/ 2X 0.8mm Conductive tip/ 2X Porcelain nozzle/ 2X Hose clamp.
Check Stock

Eastwood Silicone Surface Preparation Wax Polish Grease Dirt Remover Aerosol

  • ...R Lightweight at less than 26 Lb, operates on both 120 and 240 volts for maximum usability.
  • Welds mild and stainless steel, 24 gauge to 5/16" (3/16" on 120V), aluminum, 14 gauge to 1/4" with a Spool Gun (available separately or with the MIG 180).
  • LATEST IGBT INVERTER TECHNOLOGY with 30-180 amp welding range.
  • Eastwood MIG Welder has Metal drive motor for smoothest operation and uses .023 - .035 wire in 4" and 8" spools.
  • has 2T/4T modes for comfort during long welds and Tack Weld setting for consistency with sheet metal projects..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Approved safety glasses must be worn at all times in addition to a welding helmet. Appropriate footwear with substantial uppers and rubber soles must be worn. Protective welding helmet with the correct grade of UV lens ....
Check Stock

Mig Welder 110/220V Gas and Gasless 4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick 125A Welding Machine,Including Flux Core Wire Automatic Feed IGBT Inverter Multifunction Welders Equipment

  • ★Multi-functions:Auto 110V/220V Dual Voltage IGBT Inverter 125A perfect entry level welder, Suitable for MMA, Lift TIG, flux MIG, gas MIG,Suitable for welding stainless steel, mild steela nd other metal materials.
  • ★Mig125D has adjustable wire feed speed and welding current, you can adjust it to suit your application and weld with different thicknesses,Achieve perfect welding.Uses 0.030/0.040 flux core wire,Up to 125 Amp output that allows you to weld mild steel up to 1/8 in plate.
  • ★110/220V input power,Allows connection to 110 or 220V receptacles without tools【30A breaker suggested for 220V, 50A breaker suggested for 110V】.
  • ★Portable welder- Only 22.6lbs,Ideal for outdoor repairs, rusty metal, farm & road equipment and maintenance & repair or great gift for DIY Users.
  • ★Great service-Every mig welding machines will be subjected to strict various tests when they leave the factory to ensure that each welding machine that reaches the user is of high quality,so buy it with confidence..
Check Stock