Best Intake System

Cold Air Intake System Kit fit for 2012-2015 Chevy Camaro 3.6L V6 Black Tube & Black Filter

  • Fit for 2012-2015 Chevy Camaro 3.6L V6(Please MATCH your vehicle on the left top before purchasing).
  • This cold air intake system designed to increasing 8-10% horsepower & 6-10% torque, improveed fuel economy and creating an attractive intake noise..
  • MOOSUN intake systems are designed to dramatically reduce intake restriction as they smooth and straighten air flow. The kit replaces your vehicle's....
  • Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement.
  • No additional parts will be needed for installation after you purchase this kit, and all mount accessories are included, exactly the same as picture....
Check Stock

Canitu Dynamic Air Intake Scoop, Ram Air, Cold Air Intake Kit Systems for BMW 323i 325i 328i 330i M52 M54 E46 M3 2001-2006, Increasing Horsepower & Improving Throttle Response, Black

  • Fit for BMW e46 316i, 318i, 320d, 330d, 320i, 323i, 325i, 328i, 330i, M3. InTake + is supposed to cause cold air intake effect on the stock intake of your E46, without requiring corrections and putting a cone filter..
  • Directs cold air directly to the filter, through the front grill of the car. InTake + is effective and contributes enhancing horsepower and torque after 60 km/h..
  • Compulsory mod for anyone, who wants to improve the performance of his car!.
  • The air scoops are designed to introduce a RAM-AIR effect by directing COLD air into the intake from the front grille of your for BMW 3 Series e46 . Using the stock intake in conjunction with the scoop you reap the benefits of an intake system without the heat soak that most aftermarket intakes suffer from. The scoops are especially effective at producing more horsepower at higher speeds(35mph+). A must have mod for BMW 3 Series(E46) 1997 - 2006，if you want more performance from your car!.
Check Stock

Universal Car Air Intake Pipe, 63mm 2.5\ Modified Air Intake Flexible Expansion Pipe Ducting Silicone Hose

  • Compatible with Universal Cold Air Intake fits for most vehicles with intake/tube/hose size 63mm/2.5inch.
  • Designed for Designed for discharging cold or hot air from car engine compartment and braking system. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Extendable Easy to buckle and good tensile. It can extend to 1 meter, easy to use. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Durable Made of high quality silicone. heat-resistant, excellent electric insulating and waterproof. Bore size 63mm. Please check the size before purchasing.
  • Quality Warranty Friendly return policy and customer service. Any questions, please feel free to contact with us.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 18HP: Compatible with 6.2L, V8, 2008-2013 Chevy Corvette, 63-3073

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 18HP and up to 20 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay.
Check Stock

Mishimoto MMAI-CIV-17SIBK Performance Air Intake Compatible With Honda Civic Si 2017-2021 Black

  • Direct fit for the 2017-2021 Honda Civic Si.
  • Dyno-proven maximum gains of up to 4 whp and 4 wtq on the stock tune with 37% less restrictive than stock intake system.
  • Smooth design eliminates restrictions and improves airflow.
  • Highly aggressive intake tone under acceleration.
  • Aluminum intake pipe includes CNC-machined MAF housing and comes with the Mishimoto Lifetime Warranty.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 19HP: Compatible with 6.2L, V8, 2010-2015 Chevy Camaro, 63-3074

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 19HP and up to 19 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ROTO-MOLDED INTAKE TUBE & CUSTOM HEAT SHIELD: A high-density polyethylene (HDPE) rotationally-molded intake tube helps increase the volume of airflow to your engine, while the h....
Check Stock

Torchetree 3 Universal cold air intake System kit（Red）

  • [Easy to Install]-- Very easy to install in your car or truck, easy to install using simple tools, no other parts to install, can be completed in 112....
  • [Quality and Reliability]-- Components are of reliable quality and durable. The intake pipe is made of quality aluminum and polished, and the quality....
  • [Superior Performance]-- Replacing this intake kit can increase horsepower by 7-10% and torque by 6-30%, resulting in better throttle response and....
  • [FITMENT]-- Compatible with 3" Universal cold air intake System kit（Red）.
  • [NOTE]-- For details, please determine the fit in "confirmedfit", to confirm that the part is correct for your vehicle application.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 13HP: Compatible with 1.6L, L4, 2013-2017 Hyundai Veloster Turbo, 69-5312TS

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 13HP and up to 16 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and powder coated aluminum intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay.
Check Stock

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 18HP: Compatible with 6.2L, V8, 2010-2015 Chevy Camaro SS, 69-4519TP

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 18HP and up to 18 ft.lbs. of Torque.
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions.
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and mirror finish aluminum intake tube helps increase the volume of airflow to your engine,....
Check Stock