Best Inspection Measurement

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..

Check Stock

LabStrobe Pocket LED Stroboscope with Tripod

115V AC digital stroboscope with xenon flash tube and adjustable flash rate is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion.
Flash rate range of 30 to 10,000 flashes per minute (FPM) and built-in multiply-by-2 and divide-by-2 functionality provides still images and verification of speed measurement.
Xenon flash tube with 8 to 20 microsecond flash duration provides crisp images in brightly lit areas.
Internal phase shift allows the operator to manually rotate the target location clockwise or counterclockwise in 5 degree increments.
115V AC power and continuous duty cycle provide long-term use without overheating.

Check Stock

Ultrasonic Flaw Detector Flaw Detection Tools Testing Equipment for Cracks Welds Pores Sand Holes Inclusions Folding Etc

1.Measurement display mode: positive wave,negative wave,full wave and wave.
2.It has a linear suppression function, the maximum inhibition is 80% of the screen height.
3.It can switch between single crystal probe, double crystal probe and two inspection modes.
4.It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set.
5.500 independent detection channels, each channel set a separate set of testing parameters, DAC curve.
6.Two display modes with angle and K value.
7.The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves.
8.AVG curve is generated automatically, and two types of defects can be customized.
10.With storage function, it can store 100 A sweep patterns, parameters and DAC curve.
11.Has a storage graphics playback function, the stored A-scan graphics from the storage area and displayed on the screen.
12.Has a delete function to delete the specified content (represented by the storage group number) from the storage area.
14.Freeze and thaw functions with waveform and inspection parameters.

Check Stock

Generic USB Digital Microscope, 50x and1000x Magnification with HD 1080P 2MP Camera, MiniMicroscope Camera,8 LED Lights for Smartphone/Tablet/PC (Getting Start up Level, NOT iPhone/iPad, Black)

[ 12 Pack Slide Collection ] Coming with Plastic materials, it was not as clear as glass, but they are safer for you and it can stimulate people's curiosity about exploring microscopic elements..
[ Easy To Use ] Easily operate with the software provided (for free), you can even use it as a measurement tool (only for Windows). One key taking pictures and zoom the objective. For computer software is "smart camera". For android phone app is" inskam"..
[ 1080P ] The handheld USB microscope camera is made up of high-quality IC and electronic components, with clear image quality, low power consumption, high-resolution etc. advantages. Provides great image quality with 1920x1080 resolution (Only cellphone supports 1920x1080P resolution, video is 720P)..
[ Explore the Microscopic World ] Widely used to skin inspection, hair inspection, industrial inspection (PCB, material) education purpose, print industrial, textile industrial, biological inspection, jewelry & stamp (collections) inspection. Also, it was perfect gift for kids to explore the microscopic world. May this little tools will give you a scientist, Possible? Possible..

Check Stock

Mitutoyo 518-351A-21 Linear Height Gauge LH-600D High Performance 2D Measurement System, SPC Output, 24kg Mass

Measurement range of 0 to 38 inches (0 to 972 mm), with selectable resolution to 0.000001” (0.0001 mm).
Graphic LCD digital readout with backlighting and keypad provides statistical functions for data analysis.
Air-cushion with adjustable height for movement or measurement supports rapid inspection.
Motorized drive for ease of vertical probe positioning.
Statistical process control (SPC) output to transmit results to a Mitutoyo miniprocessor or computer.

Check Stock

AMTAST Professional Surface Roughness Tester Metal Surface Roughness Gauge

The Surface Roughness Tester AMT211 complies with international standards ISO, DIN, ANSI, JIS. Users-friendly system and intuitive menu navigation, Multi-direction measurement such as lateral and upsid..
Sensor can work in the meter, also can work independent through 1.0m length cable (Max can be 3m)..
Affordable Touch screen & button operational Surface Roughness Tester. Roughness parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr, Ry(JIS), Rmax, RPc, Rk, Rpk, Rvk, Mr1, Mr2, resolution 0.001 micron. With bluetooth, also can by app to connect with mobile phone..
Calculation results, assessed profiles, bearing and amplitude curves can be displayed. DSP chip controlled achieves high accuracy and fast testing speed, easily connected to PC & Printer.
Wide Application: This portable Surface Roughness Tester allows surface roughness measurement both on metal and non-metal workpieces. It is suitable for machining and manufacturing, quality control, inspection departments, especially for measurement on large and heavy workpiece, assembly line on site. The AMT211 is a Non Destructive Testing instrument, damage won’t be caused when testing piece..

Check Stock

Traceable Excursion-Trac™ Datalogging Thermometer with Calibration; 1 Plastic Bottle Probe

...hree color LED and sound alarm It has 5 sets of high and low temperature alarm preset values, with three-color LED warning lights for fast positioning of high/low temperature points, and convenient inspection of damaged parts.
Sufficient D:S ratio of 50:1 The high-level D:S has a wider range of use and more accurate measurement. such as temperature measurement in high-temperature, high-pressure industrial environments D: S The larger the S ratio, the more accurate the measurement range.Adjustable emissivity The emissivity can be adjusted according to the measured object of different materials, the adjustment range is between 0.1-1.0 Select the appropriate emissivity to ensure the accuracy and reliability ofthe measurement.
Application Pre-maintenance and diagnosis in the power and electrical industry Car fault diagnosis Control food hyqiene and safety Electrical fault diagnosis HVAC industry refrigeration industry Iron ore smelting Fault diagnosis in petrochemical industry.

Check Stock

Swagger: Unleash Everything You Are and Become Everything You Want

... holes, inclusions, folding, etc. It has been applied for electric power, petrochemical, boiler and pressure vessel, steel structure, military, aerospace, railway transportation, automobile, machinery and other fields. It is an essential instrument for the non-destructive.
Measurement display mode: positive wave,negative wave,full wave and wave.
It has a linear suppression function, the maximum inhibition is 80% of the screen height.
It can switch between single crystal probe, double crystal probe and two inspection modes.
It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set.
500 independent detection channels, each channel set a separate set of testing parameters, DAC curve.
Two display modes with angle and K value.
The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves.
AVG curve is generated automatically, and two types of defects can be customized.
With storage function, it can store 100 A sweep patterns, parameter....

Check Stock

Mornajina Dial Indicator with Magnetic Base 0-1.0 Tester Gage Dial Test Indicator 0.001 Precision Magnetic Dial Indicator Base Holder with Fine Adjustment

【Dial Test Indicator Tester Gage】: Mornajina magnetic dial indicator holder set with fine adjustment long arm, on and off switch, is made of steel hardened, professional and durable. Universal rotating shaft with fine-tuning knob for more accurate measurement. 0-1.0" Tester Gage, Dial Test Indicator Graduation 0.001" Precision..
【Magnetic Dial Indicator with Base Holder】: These dial Indicator with magnetic base precision measuring Gauge Tools Kit, strong 2 magnet surfaces with ON/OFF control, could provide 140lb-160lbs, power pull. For 160lb, it requires 30mm and up thickness metal countertop/surface..
【Measurement】: 1" dial indicator: graduation 0.001", 3/8" stem diameter. 2" Flat back or lug back option included (hole size 1/4”, 6.3mm). 9" Height Magnetic base, on and off switch. 2" width X 2-1/2" depth Base measures. 22-pieces indicator point set: AGD specifications (4-48 threads)..
【Wide Application】: Applicable to various comparative measurements in the workshop and inspection room. It can be used with machine tools, equipment, and other measuring equipment to compare two heights or distances between narrow limits, to determine the errors in the geometrical form, to take accurate measurements of deformation, to take determine posi....

Check Stock