Best Injection Container Mould

Rev-A-Shelf Polymer Replacement 27qt Waste/Trash Container Pull Outs, Standard, Black

  • Included: (1) Black 27 qt. waste container - To be used with Rev-A-Shelf branded products - Rev-A-Shelf waste container frame sold separately - Construction: Injection molded polymer plastic designed for durability.
Check Stock

BH Supplies Pen Needles 32 Gauge - 3/16

  • ALL-IN-ONE: UltiGuard Safe Pack is the only all-in-one system to store, dispense and dispose of pen needles.
  • DUAL-PURPOSE FDA-CLEARED SHARPS CONTAINER is made from premium puncture and impact resistant material, protecting families and communities from accidental needlestick injuries.
  • 100 PEN NEEDLES: UltiGuard Safe Pack contains 100 single-use 32G pen needles with highly polished and silicone coated 6mm (1/4) needles for a comfortable injection every time.
  • HOME CARE KIT: A perfect solution for at-home administration, complete with a sharps container. This kit is an FDA-cleared sharps container and meets safe needle disposal guidelines in all 50 states.
  • PREMIUM QUALITY PEN NEEDLES provide a triple bevel electromagnetic polished, silicone coated needle with non-coring treatment for a clean piercing.
Check Stock

Rev-A-Shelf RV-35-17-52 35 Quart Plastic Replacement Waste Container Garbage Bin Trash Can for The Kitchen or Laundry Room Silver

  • MAXIMIZE YOUR SPACE: Maximize space and efficiency of your kitchen with this 35-quart waste container.
  • DURABILITY & ELEGANCE: Crafted with injection molded polymer plastic designed for durability.
  • EASY TO USE: Great option by itself or as an extra container.
  • DIMENSIONS (W x D x H): 14"W x 10.25"D x 17.9"H.
  • Designed to fit into Rev-A-Shelf Waste....
  • INCLUDES: Includes (1) Silver 35 quart waste container only.
  • Optional Rev-A-Shelf waste container frames and lids available, sold separately.
Check Stock

APEC Water Systems SET 3 Pcs 3.5\ O.D. Replacement O-Ring For Reverse Osmosis Water Filter Housings, 3 Count (Pack of 1), Black

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

Orbiter Extruder V1.5 Dual Drive Direct with Motor Compatible with Ender 3 V2 Pro Ender5 Plus CR10 BLV Voron V2.4 Prusa MK3S Also Suit DDE-O TPU Printing

  • Plastic is using glass fiber reinforced nylon injection modling, Sturdy shell and mould manufacturing..
  • PLEASE NOTE: The motor may come with LDO or Moons Big factory, both motors have very high quality, not effects on the use of extruder, please know....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

MedtFine Insulin Pen Needles (31G 5mm)

  • ALL-IN-ONE: UltiGuard Safe Pack is the only all-in-one system to store, dispense and dispose of pet insulin syringes..
  • DUAL-PURPOSE FDA-CLEARED SHARPS CONTAINER is made from premium puncture and impact resistant material, protecting families and communities from accidental needlestick injuries..
  • 100 PET INSULIN SYRINGES: UltiGuard Safe Pack contains 100 single use 1/2cc human-grade U-40 insulin syringes with highly polished and silicone coated 1/2” needles for a comfortable injection for your diabetic cat or dog. Doses up to 12 units of U-40 insulin..
  • HOME CARE KIT: A perfect solution for at-home pet insulin administration, complete with a sharps container. This kit is an FDA-cleared sharps container and meets safe needle disposal guidelines in all 50 states..
  • HUMAN-GRADE INSULIN SYRINGES provide a triple bevel electromagnetic polished, silicone coated needle with bold barrel markings and large barrel flanges for accurate dosing and easy grip and control. FOR ANIMAL USE ONLY.
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock