Best Infrared Thermocouple

ProAccurate Infrared/Thermocouple Probe Thermometer, Black and Silver

Dual function with infrared for non-contact surface temperatures and thermocouple probe for internal temperatures.
Maximum, Minimum and Lock modes for continuous scanning.
White light target illumination/ HACCP check lights and icons.

Not Intended for Testing Human Temperature.
Laser thermometer has ultra-high temperature operation up to 4, 352-degrees Fahrenheit (2, 400-degrees Celsius).
Thermometer measurement with included K-type thermocouple is - 83. 2 degrees to 2, 552 degrees Fahrenheit (-64 degrees to 1, 400 degrees Celsius).
Digital thermometer has 100: 1 distance to spot ratio with dual laser tracking system.
Infrared thermometer stores up to 24 data points with a fast readout response time of . 5-seconds.

INSTANT READ CONVENIENCE – Gadget Displays Temperature in 3 Seconds for Probe & 1 Second for IR Sensor.
Precision Infrared Laser Reads Food Surface Within 2%.
Colors Change to Indicate Level of Doneness [Rare, Medium, Well Done].
LARGE DIGITAL DISPLAY – Simple Two-Button Interface Displays Fahrenheit or Celsius.
THERMOCOUPLE OR INFRARED READING – Use the Probe to Measure the Inside of Meat Within 1% Accuracy.
MULTIFUNCTIONAL FOOD THERMOMETER – Highly Accurate Kitchen Tool Reads the Internal & Surface Temperatures of Beef, Lamb, Pork, Chicken & Other Foods.
EFFORTLESS OPERATION – Helpful Cooking Device is Dust & Splash Proof, Features Built-In Magnet & Easily Wipes Clean.
Reads Extra High Temp for Grilling, Baking & More.

High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.

Accuracy: ±0.6°C, Bath Stability: ±0.5°C.
Measuring Functions: J Type Thermocouple, K Type Thermocouple, T Type Thermocouple, R Type Thermocouple, S Type Thermocouple, N Type Thermocouple, MA, MV, Volts, Ohms, RTD (Pt 100).
Temperature Steps: 50°C, 150°C, 300°C, 450°C, 600°C.
Switch Test: Continuity check with OPEN / CLOSE indication.
Transmitter Supply: 24V DC ± 10% (Loop Powered).
Power Supply: 230V AC ± 5% / 50Hz, 500 W for 350UTC.
Supply Scope: Instrument, Power Cable, Carrying Case, Test Lead(2 & 3 Wire), Insertion Tube, Insertion Tool,Spare Fuses: 6A x 2nos User Manual, Calibration Certificate.

QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
Top Quality Aftermarket Replacement Part.
The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
Designed Specifically for the above mentioned models.

...argeting makes this infrared thermometers easier to visualize the area being measured, resulting in higher precision than single laser, measure surface temperature ranging from -50°C to 550°C (-58°F to 1022°F)..
【2 Measurement modes】Provide two ways of temperature measurement: infrared non-contact and K type thermocouple probe. Making this high temp laser gun more fitable to use in different situations..
【More fouctions】Temperature and Humidity Measurement. Two led light make you easier to use in darkness. NCV function to detect ac power. Colorful LCD screen has good viewing angle and better display than normal LCD screen. Low battery indicator and 30-second automatic shut down function. °C/°F switchable. MAX / HOLD data function. A 9V 6F22 battery is included..