Best Industrial Thermocouples

Fluke 754 Documenting Process Calibrator with HART Communication

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments.
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters.
Power transmitters during test using loop supply with simultaneous mA measurement.
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules.
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results.

Portable, dual-input thermometer for reading temperatures from two sources simultaneously, and is used in quality control and HVAC, electrical,....
Dual-scale temperature readings range from -328 to 2,498 degrees F (-200 to 1,370 degrees C).
Dual-input thermocouples for superheat and subcool applications, and cut-out and cut-in temperature measurements, and offset mode compensates for....
Backlit LCD screen with a data hold feature to save temperature readings for later viewing, maximum and minimum temperature with elapsed time, average....

Material: Made of high quality ceramic material, durable and long service life..
Accepts AWG 8 (3.3 mm) Type K thermocouples..
With high mechanical, high strength, high volume resistivity, good electrical insulation properties..
Unglazed ceramic thermocouple connector block for high temperature K-type thermocouples..
Package includes: 1 x Thermocouple Terminal Block..

pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).

[DUAL CHANNEL] T1-T2 Dual Channel Thermocouple K/J Type Thermometer come with 2 x Wired K-type Thermocouples and 2 x Stainless Steel Type K-type Thermocouples probes.
[WIDE MEASURING RANGE] Wide measuring range for both the meter and the probe, ideal for wide range of temperature measurement. Measuring range of main unit is -328 to 2501°F, Wired K-type probe is -4 to 392°F, Stainless Steel K-type Probe is -58 to 1292°F..
[TEMPERATURE OFFSET FUNCTION] This temperature gauge with manual temperature compensation (Offset) function for thermocouples to optimize the test accuracy. The adjustable range of temperature compensation is -15.8 to 48.2℉(-9 to 9℃).
[LARGE SCREEN WITH ALARM] Wide screen with dual temperature readouts + backlight function for convenient reading of the temperature result while testing even in dark areas. Can also set Hi and Low alarm and will show a color backlight when the measurement is below or above the set value..
[AUTO OFF FUNCTION] You can save the battery energy by its automatic power off function after 10min of no measurement. On the other hand, user can also select to disable the auto powe....

Designed to work with 2 external K-Type thermocouples for high-temperature measurement ranging from -50 ~ 1300°C (-58 ~ 2372°F)..
Comes with built-in microcontroller software & dual thermocouple input terminals that enable simultaneous measurement of two samples.
Precision: Reading Accuracy (±0.1°C ±0.4) & fast response with K-Type Thermocouple Probes.
Comes with a removable silicon rubber holster to protect your device from an accidental drop.
Practical - any standard K-Type thermocouple connectors can be used to replaced the included thermocouples when it needed a replacement.

Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer.
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Ceramic Thermocouple ( -58°F to 2372°F)....
Shipping to USA is 3-6 business days. For more information please go to our website Thermomart.

【Support K/J/T/E/R/S/N Type Thermocouples Measurement】Packed with two K-Type thermocouples, this Proster Digital Thermocouple can direct measure the temperature of tested object.
【Considerable Measuring Range】Can be used to measure the temperature of liquid / vapors and surface temperature of a solid object.Also suitable to be used both in the high temperature fields of blast furnance and cookery and the low temperature measuring for liquefied hydrogen and liquefied nitrogen etc.
【High Accuracy】K-type Thermocouple Measuring range: -50~300℃.
Resolution: 0.1℃/℉＜1000°,1.0℃/℉≥1000°.
【Functional Design】Data Hold Function.
Double display with LCD Backlight shows T1/T2 and combination of T1 and T2.
【Wide Applications】Fish tank, pool, furnaces, ceramic, pottery, molten metal etc..

Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer.
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit..
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Package Includes: Didital Pyrometer+ 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Ceramic....
Shipping to USA is 3-6 business days. Ceramic Protection tube specification :Temperature Resistance Up to 2372 °F (1300 °C) Diameter (ɸ) Inside....