Best Indexable Punch

ARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel

  • SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
  • QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

WEN CH4704 18.5-Inch Indexable Wood Turning Chisel with Four Carbide Cutter Tips

  • Always sharp: indexable 6-inch gouge bar allows for easy tip installation and changes.
  • Includes four different shapes of carbide cutter tips: round, square, diamond, and arc.
  • Form-fitted 12-inch wooden handle crafted from durable African coralwood.
  • Easily replace a dull chisel tip with a set of WEN CH016R Indexable Cutters.
  • The perfect woodworking accessory for the WEN Wood Lathe Series.
Check Stock

Soul Summit

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The....
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much....
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4....
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high....
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached....
Check Stock

[ELEPHAS] Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt planer Original DW735-OEM

  • This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead..
  • Reduced noise and tear-out, produce much smoother finish on difficult woods..
  • The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead..
  • The indexable inserts allows you to rotate it if one knife edge is dull or nicked..
  • Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches.
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

ELEPHAS - 6 Woodworking Tool Spiral Cutter head and Helical cutterhead for jointer 4 rows 20 inserts

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The....
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much....
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4....
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high....
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached....
Check Stock

ABN Adjustable Pry Bar Set Heavy Duty 11-Point Indexing Pry Bar Set Automotive Pry Bar 3pc Kit – 8in, 12in, 16in

  • ALIGN & REPOSITION AUTOMOTIVE EQUIPMENT: Use the ABN | Pry Tool Indexable Pry Bar Kit 3-Piece Set to remove engine and axle drive seals, pull diesel injectors, position engines, align steel components, and reposition equipment.
  • Each automotive pry bar tool has a full 180-degree indexable head swing that you can set to 1 of 11 different locking positions for the right angle and leverage to access hard-to-reach spots.
  • Simply push down button on head and turn claw to angle.
  • BUILT TO LAST: Constructed with a strong locking device on index and full chrome-vanadium steel (CR-V) body with a manganese phosphate finish for maximum strength and longevity that resists rust and corrosion.
  • Adjustable prybar tool set meets or exceeds ANSI specifications.
  • GRIP COMFORTABLY: Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity.
  • EASY STORAGE: Heavy-duty 17.5” x 2.4” x 8.2” inch (44.5cm x 6.1cm x 20.8cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Pry bars heavy duty flat bar tool kit includes (3) adjustable and indexable angle pry bars (8”, 12”, 16” inch) and (1) ca....
Check Stock

Sandvik Coromant 880-D1200L20-03 Corodrill 880 Indexable Insert Drill, 880.L-03 (01) Tool Style Code, 0.787\ Shank, 20 mm Shank Diameter (Pack of 1)

  • INDEXABLE DRILL: Versatile, carbide insert drilling tool and inserts for excellent tool life and holemaking performance.
  • Patented STEP TECHNOLOGY to deliver excellent cutting force balance and indexable drilling productivity.
  • INSERT SIZE & POCKET POSITIONING: Size 880-01 insert size, Central and Periphery drilling inserts.
  • DRILL SHANK AND TYPE: Cylindrical with flat shank, coolant through the drill, metric design.
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
Check Stock