Best Inconel Pipe

Drill America - GLBCOX121/4 1/4' x 12' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 12" overall length for drilling where extra length for reach is required.
Check Stock

Drill America GLBCOX65/32 5/32' x 6' Cobalt Aircraft Extension Drill Bit, GLBCO Series

  • Effective in drilling tough, high tensile strength materials like stainless steel, inconel and titanium.
  • 135° split point tip prevents drill from walking.
  • Round shanks allow use with a wide variety of tool holding systems.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • 6" overall length for drilling where extra length for reach is required.
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8 Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

  • Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Drill America 33 Piece m35 Cobalt Reduced Shank Drill Bit Set (1/2″ – 1″ x 64ths), DWDCO Series

  • 33 Piece Set with 1/2″ Reduced Shank Drill Bits.
  • Effective in drilling tough, high tensile strength materials like stainless steel, Inconel, and titanium.
  • Reduced Shank Drills expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • 135 degree split point tip for self-centering and reducing thrust.
  • Manufactured to Aerospace Standard 907 and display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel.
  • Sizes include: 1/2″, 33/64″, 17/32″, 35/64″, 9/16″, 37/64″, 19/32″, 39/64″, 5/8″, 41/64″, 21/32″, 43/64″, 11/16″, 45/64″, 23/32″, 47/64″, 3/4″, 49/64″, 25/32″, 51/64″, 13/16″, 53/64″, 27/32″, 55/64″, 7/8″, 57/64″, 29/32″, 59/64″, 15/16″, 61/64″, 31/32″, 63/64″ and 1″..
Check Stock

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

  • ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock