Best Inch Stainless Steel Exhaust Tips 2

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

... 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.

Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..

Check Stock

Yonput 1 PC 2.5 Inch Inlet Exhaust Tip, 3.3" Outlet 5.7" Overall Length, Stainless Steel Black Powder Coated Exhaust Tailpipe, Rolled Angle Cut, Car Universal for 2.5" OD Tailpipe (Bending)

Dimension: 2.5 inch inside diameter inlet, 3.3 inch outside diameter outlet, 5.7 inch overall length. Please make sure the outside diameter of your car tailpipe is 2.5-inch before purchase..
High Quality: The stainless steel exhaust tail is made of high quality stainless steel with strong anti-corrosive, it effectively resist heat, rust and deformation to protect and decorate your tailpipe system well..
Stylish Design: Black powder coated surface treatment, high temperature resistance, not easy to scratch and fall off. Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound..
Easy Installation: Bolt On Installation, not easy to screw off, no drilling or welding needed..
Maintenance Tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips to keep the surface clean..

Check Stock

FLOWMASTER FLOWFX CAT-BACK EXHAUST SYSTEM,409S STAINLESS STEEL,4" BLACK CERAMIC TIPS,DUAL SAME SIDE EXIT,COMPATIBLE WITH 2009-2020 TUNDRA 4.6L, 4.7L & 5.7L

Brand New Flowmaster FlowFX Cat-Back Exhaust System, 409s Stainless Steel, 4" Black Ceramic Tips, Dual Same Side Exit, Compatible with 2009-2020 Tundra 4.6L, 4.7L & 5.7L (Holley Part #717786).
Introducing the new Flowmaster FlowFX Cat-back exhaust system. This bolt-on emissions legal system is perfect for the person looking for an exhaust with a moderately aggressive interior & exterior tone with all of the performance benefits that you would expect from Flowmaster. Features include dual 2.5"stainless steel mandrel-bent inlet tubes flowing into a FlowFX straight-through performance muffler, giving a deep powerful tone outside the truck with a deep mellow tone inside the cab..
The dual 2.5" tailpipes exit in front of the passenger side rear tire & are finished off with a pair of large 4" double wall black ceramic coated stainless tips. Includes all necessary parts, hardware & detailed instructions for an easy at home install..
Features: Large 4" Black Ceramic Coated Stainless Steel Tips | Straight-through FlowFX Series Performance Muffler | Dyno Tuned For Maximum Performance | Stainle....

Check Stock

FORTLUFT Exhaust Dual Tip Carbon Fiber & Stainless Steel (3.50''/89mm, Dual Tip Competition Style RIGHT SIDE)

Right Side - Outside Diameter 3.50''/89mm - Inlet Pipe Outside Diameter 2.50''/63.5mm.
Universal, Stainless Steel and Carbon Fiber, Nonmagnetic.
FORTLUFT provides the guarantee for the Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel corrosion-resistance for the 1-year period or during the next 15000 miles (24000 km) after the spare part installation..
The universal Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel FORTLUFT is part of the automobile exhaust system. This element decorates and completes the exhaust system providing a car with the sport style look. Thanks to the universal fastening coupled with a clamp, this spare part can be used for any car brand..
The spare part has a modern design and is made from the high-quality Carbon Fiber & Stainless Steel. Exhaust Dual Tip Slant Cut Competition Style perfectly blends with the car making it look sporty and aggressively. Leading car tuning studios recommend such kinds of tips to their customers. Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel has two nozzles of different lengths. There are two models provided depending on the installation method: left side and right side..

Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust(NOTE: Professional installation would be highly recommended).

Check Stock

TOTALFLOW 644 Mini Muffler 409SS | 3.5" Round Width | 4" Body 6" Overall Length Inner Inlet-2.5" Outer Diameter Outlet

TOTALFLOW 644 Mini Race Exhaust Muffler | 409 Stainless Steel | 3.5 Inch Round Body Width | 4 Inch Body Length | 6 Inch Overall Length | 2.5 Inch Inner Diameter Inlet - 2.5 Inch Outer Diameter Outlet. Fit Type: "Universal Fitment". To help us maintain the lowest prices online, please double check your exhaust size prior to placing your order to avoid restocking and inbound/outbound shipping fees.
Constructed from Heavy "Approx. ±16" Gauge 409 Stainless Steel, With 100% Stainless Steel Mesh Internal Fill For Perfect Sound Tuning. Free flow muffler, straight through perforated stainless steel core wrapped with stainless steel mesh to enhances sound, exhaust flow & improves performance..
State of the art - TOP NOTCH - TIG welded for long life. Perfect for any custom exhaust project or muffler upgrade. "UNLEASH THE BEAST WITHIN".
We take pride in our work and products, Top Notch Craftsmanship that is compared to NO ONE in the industry. Compact Race Bullet Mini Universal Muffler - Will Fit Anywhere -not a direct fit. Please note that some adaptation required..

Check Stock

Pack of 2 Upower Exhaust Tip 2.25' Inlet 2' x 6' Outlet 10' Long Rolled Rectangle Stainless Steel Exhaust Tailpipe Tips fits Chevy Camaro Style

【Design】Weld On – Rolled Edge – Angle Cut. Note:Regularly walking uphill can better drain the water in the exhaust tip.
【Material】High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and deformation.
【Wide Application】Fits 2.5″ INLET diameter car exhaust tail pipe..
【1 Year Warranty】No instruction is included. Professional installation is highly recommended..

Check Stock

Exhaust Muffler Pipe Tip Fit for Mercedes-Benz C63 Exhaust Muffler Tips AMG For C250 C300 C350 Mercedes W204 W211 C-Class SS304-Black

Exhaust Tip 2.25 inch Inlet 4.5 inch Outlet 12.00 inch long Dual Slant.To ensure proper fit make sure your exhaust INLET diameter is 2.25 Inch.
Professional installation is highly recommended.
Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty..
Weld On installation and Thickness Double Wall Slant Rolled Edge Design.
12 MONTHS WORRY-FREE :We maintain high standard of excellence and strive for 100 percent customer satisfaction. If you have any query of your order, please feel free to contact us firstly before you leave a feedback, we will get back to you within 12 hours on working day!.

Check Stock